This object describes how this entry was created. If the
value is manual(2), this row was created by a network
management action (either configuration, or SNMP set).
If set to learned(3), then it was found via
looking at the source IP address of a received packet.
Parsed from file DOCS-CABLE-DEVICE-MIB.mib
Module: DOCS-CABLE-DEVICE-MIB
The Internet address to which this entry applies.
Implementors need to be aware that if the size of
docsDevCpeInetAddr exceeds 114 octets OIDs of
instances of columns in this row will have more
than 128 sub-identifiers and cannot be accessed
using SNMPv1, SNMPv2c, or SNMPv3. Only unicast
address are allowed for this object.
The Internet address to which this entry applies.
Implementors need to be aware that if the size of
docsDevCpeInetAddr exceeds 114 octets OIDs of
instances of columns in this row will have more
than 128 sub-identifiers and cannot be accessed
using SNMPv1, SNMPv2c, or SNMPv3. Only unicast
address are allowed for this object.
Parsed from file rfc4639-DOCSIS-Cable-Device.mib.txt
Company: None
Module: DOCS-CABLE-DEVICE-MIB
The Internet address to which this entry applies.
Implementors need to be aware that if the size of
docsDevCpeInetAddr exceeds 114 octets OIDs of
instances of columns in this row will have more
than 128 sub-identifiers and cannot be accessed
using SNMPv1, SNMPv2c, or SNMPv3. Only unicast
address are allowed for this object.
docsDevCpeV6Source OBJECT-TYPE SYNTAX INTEGER { other(1), manual(2), learned(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes how this entry was created. If the value is manual(2), this row was created by a network management action (either configuration, or SNMP set). If set to learned(3), then it was found via looking at the source IP address of a received packet." ::= { docsDevCpeV6Entry 2 }
docsDevCpeInetAddr OBJECT-TYPE SYNTAX InetAddress ACCESS not-accessible STATUS mandatory DESCRIPTION "The Internet address to which this entry applies. Implementors need to be aware that if the size of docsDevCpeInetAddr exceeds 114 octets OIDs of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. Only unicast address are allowed for this object." ::= { docsDevCpeInetEntry 2 }
Vendor: Cisco Systems
Module: DOCS-CABLE-DEVICE-MIB (DOCS-CABLE-DEVICE-MIB-V1SMI.my)
Type: TABULAR
Access: not-accessible
Syntax: InetAddress
Automatically extracted from www.mibdepot.com
docsDevCpeInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Internet address to which this entry applies. Implementors need to be aware that if the size of docsDevCpeInetAddr exceeds 114 octets OIDs of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. Only unicast address are allowed for this object." ::= { docsDevCpeInetEntry 2 }
docsDevCpeInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Internet address to which this entry applies. Implementors need to be aware that if the size of docsDevCpeInetAddr exceeds 114 octets OIDs of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. Only unicast address are allowed for this object." ::= { docsDevCpeInetEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.69.1.7.4.1.1 | docsDevCpeInetType, docsDevCpeV6Ip | 0 | 0 | The type of internet address of docsDevCpeInetAddr. |
| 1.3.6.1.2.1.69.1.7.4.1.3 | docsDevCpeInetSource, docsDevCpeV6Status | 0 | 0 | Standard object to manipulate rows. To create a row in this table, you only need to specify this object. Management stations SHOU… |
| 1.3.6.1.2.1.69.1.7.4.1.4 | docsDevCpeInetRowStatus | 0 | 0 | Standard object to manipulate rows. To create a row in this table, one only needs to specify this object. Management stations SH… |