frwkIpFilterSrcPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
UNITS "bits"
STATUS current
DESCRIPTION
"The length of a mask for the matching of the source IP
address. This attribute is interpreted only if the
InetAddressType is ipv4, ipv4z, ipv6 or ipv6z.
Masks are constructed by setting bits in sequence from the
most-significant bit downwards for
frwkIpFilterSrcPrefixLength bits length. All other bits in
the mask, up to the number needed to fill the length of
the address frwkIpFilterSrcAddr are cleared to zero. A
zero bit in the mask then means that the corresponding bit
in the address always matches.
In IPv4 addresses, a length of 0 indicates a match of any
address; a length of 32 indicates a match of a single host
address, and a length between 0 and 32 indicates the use of
a CIDR Prefix. IPv6 is similar, except that prefix lengths
range from 0..128."
REFERENCE
"Textual Conventions for Internet Network Addresses.
RFC 3291."
DEFVAL { 0 }
View at oid-info.com
Automatically extracted from RFC3318
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.2.2.3.2.1.1 | frwkIpFilterAddrType | 0 | 0 | frwkIpFilterAddrType OBJECT-TYPE SYNTAX InetAddressType STATUS current DESCRIPTION "The address type enumeration value to speci… |
1.3.6.1.2.2.2.3.2.1.2 | frwkIpFilterDstAddr | 0 | 0 | frwkIpFilterDstAddr OBJECT-TYPE SYNTAX InetAddress STATUS current DESCRIPTION "The IP address to match against the packets dest… |
1.3.6.1.2.2.2.3.2.1.3 | frwkIpFilterDstPrefixLength | 0 | 0 | frwkIpFilterDstPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength STATUS current DESCRIPTION "The length of a mask for the… |
1.3.6.1.2.2.2.3.2.1.4 | frwkIpFilterSrcAddr | 0 | 0 | frwkIpFilterSrcAddr OBJECT-TYPE SYNTAX InetAddress STATUS current DESCRIPTION "The IP address to match against the packets sour… |
1.3.6.1.2.2.2.3.2.1.6 | frwkIpFilterDscp | 0 | 0 | frwkIpFilterDscp OBJECT-TYPE SYNTAX DscpOrAny STATUS current DESCRIPTION "The value that the DSCP in the packet can have and ma… |
1.3.6.1.2.2.2.3.2.1.7 | frwkIpFilterFlowId | 0 | 0 | frwkIpFilterFlowId OBJECT-TYPE SYNTAX Integer32 (-1 | 0..1048575) STATUS current DESCRIPTION "The flow label or flow identifier… |
1.3.6.1.2.2.2.3.2.1.8 | frwkIpFilterProtocol | 0 | 0 | frwkIpFilterProtocol OBJECT-TYPE SYNTAX Unsigned32 (0..255) STATUS current DESCRIPTION "The layer-4 protocol Id to match agains… |
1.3.6.1.2.2.2.3.2.1.9 | frwkIpFilterDstL4PortMin | 0 | 0 | frwkIpFilterDstL4PortMin OBJECT-TYPE SYNTAX InetPortNumber STATUS current DESCRIPTION "The minimum value that the packets layer… |
1.3.6.1.2.2.2.3.2.1.10 | frwkIpFilterDstL4PortMax | 0 | 0 | frwkIpFilterDstL4PortMax OBJECT-TYPE SYNTAX InetPortNumber STATUS current DESCRIPTION "The maximum value that the packets layer… |
1.3.6.1.2.2.2.3.2.1.11 | frwkIpFilterSrcL4PortMin | 0 | 0 | frwkIpFilterSrcL4PortMin OBJECT-TYPE SYNTAX InetPortNumber STATUS current DESCRIPTION "The minimum value that the packets layer… |
1.3.6.1.2.2.2.3.2.1.12 | frwkIpFilterSrcL4PortMax | 0 | 0 | frwkIpFilterSrcL4PortMax OBJECT-TYPE SYNTAX InetPortNumber STATUS current DESCRIPTION "The maximum value that the packets layer… |