The maximum number of non-default
AS-external-LSA entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow
state. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. ospfv3ExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area (i.e.,
OSPFv3 stub areas and not-so-stubby-areas (NSSAs)
are excluded).
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage.
Parsed from file OSPFV3-MIB.mib.txt
Company: huawei
Module: OSPFV3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ospfv3ExtAreaLsdbLimit OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link state database reaches ospfv3ExtAreaLsdbLimit, the router enters Overflow state. The router never holds more than ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. ospfv3ExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area (i.e., OSPFv3 stub areas and not-so-stubby-areas (NSSAs) are excluded). This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage." ::= { ospfv3GeneralGroup 11 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.102.1.1.11.0 | ospfv3ExtAreaLsdbLimit | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.3.102.1.1.1 | ospfv3RouterId | 1 | 1 | A 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to th… |
1.3.6.1.3.102.1.1.2 | ospfv3AdminStatus, ospfv3AdminStat | 1 | 1 | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at l… |
1.3.6.1.3.102.1.1.3 | ospfv3VersionNumber | 1 | 1 | The version number of OSPF for IPv6 is 3. |
1.3.6.1.3.102.1.1.4 | ospfv3AreaBdrRtrStatus | 1 | 1 | A flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area b… |
1.3.6.1.3.102.1.1.5 | ospfv3ASBdrRtrStatus | 1 | 1 | A flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when writt… |
1.3.6.1.3.102.1.1.6 | ospfv3AsScopeLsaCount | 1 | 1 | The number of AS-scope (e.g., AS-External) link state advertisements in the link state database. |
1.3.6.1.3.102.1.1.7 | ospfv3AsScopeLsaCksumSum | 1 | 1 | The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. Thi… |
1.3.6.1.3.102.1.1.8 | ospfv3OriginateNewLsas | 1 | 1 | The number of new link state advertisements that have been originated. This number is incremented each time the router originate… |
1.3.6.1.3.102.1.1.9 | ospfv3RxNewLsas | 1 | 1 | The number of link state advertisements received that are determined to be new instantiations. This number does not include newer… |
1.3.6.1.3.102.1.1.10 | ospfv3ExtLsaCount | 1 | 1 | The number of External (LS type 0x4005) in the link state database. |
1.3.6.1.3.102.1.1.12 | ospfv3MulticastExtensions | 1 | 1 | A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cas… |
1.3.6.1.3.102.1.1.13 | ospfv3ExitOverflowInterval | 1 | 1 | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the rou… |
1.3.6.1.3.102.1.1.14 | ospfv3DemandExtensions | 1 | 1 | The router's support for demand routing. |
1.3.6.1.3.102.1.1.15 | ospfv3TrafficEngineeringSupport | 1 | 1 | The router's support for traffic engineering extensions. |
1.3.6.1.3.102.1.1.16 | ospfv3ReferenceBandwidth | 1 | 1 | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
1.3.6.1.3.102.1.1.17 | ospfv3RestartStrictLsaChecking, ospfv3RestartSupport | 1 | 1 | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unp… |
1.3.6.1.3.102.1.1.18 | ospfv3RestartInterval | 1 | 1 | Configured OSPF hitless restart timeout interval. |
1.3.6.1.3.102.1.1.19 | ospfv3RestartStatus | 1 | 1 | Current status of OSPF hitless restart. |
1.3.6.1.3.102.1.1.20 | ospfv3RestartAge | 1 | 1 | Remaining time in current OSPF hitless restart interval. |
1.3.6.1.3.102.1.1.21 | ospfv3NotificationEnable, ospfv3RestartExitReason | 1 | 1 | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the… |
1.3.6.1.3.102.1.1.22 | ospfv3StubRouterSupport | 0 | 0 | The router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supp… |
1.3.6.1.3.102.1.1.23 | ospfv3StubRouterAdvertisement | 0 | 0 | This object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement… |
1.3.6.1.3.102.1.1.24 | ospfv3DiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such di… |
1.3.6.1.3.102.1.1.25 | ospfv3RestartTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated. |