OID reference
1.3.6.1.3.114.1.1.1.10
For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to this TE link.
Identification
{1 3 6 1 3 114 1 1 1 10}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
Extracted from a source document.
teLinkOutgoingIfId OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the link is unnumbered, the outgoing interface identifier is
set to the outgoing interface identifier chosen for the TE link
by the advertising LSR."
REFERENCE
"[BUNDLING]"
::= { teLinkEntry 10 }Extracted from a source document.
teLinkOutgoingIfId OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the link is unnumbered, the outgoing interface identifier is
set to the outgoing interface identifier chosen for the TE link
by the advertising LSR."
REFERENCE
"draft-ietf-mpls-bundle-03.txt - Link Bundling in MPLS
Traffic Engineering, K. Kompella, Y. Rekhter, L. Berger,
May 2002."
::= { teLinkEntry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from LINK-BUNDLING-MIB-mpls-00.txt · ietf_drafts · LINK-BUNDLING-MIB
Source file: Download LINK-BUNDLING-MIB-mpls-00.txt
Description 2
If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR.
IETF historical Internet-Draft definitions
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: teLinkOutgoingIfId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"teLinkOutgoingIfId",
"OBJECT-TYPE",
"SYNTAX",
"InterfaceIndexOrZero",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR.\"",
"REFERENCE",
"\"[BUNDLING]\"",
"::=",
"{",
"teLinkEntry",
"10",
"}"
],
"syntax_tree": [
[
"row",
"InterfaceIndexOrZero"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR."
],
[
"REFERENCE",
"[BUNDLING]"
],
null,
null,
null
]
}Module: LINK-BUNDLING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-04; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
Source data warning: Qualified interim interpretation: this draft leaves the permanent root as { mib-2 xxx }, but explicitly says experimental 114 can be used in the interim. The earlier -03 draft independently declares that experimental root. This record follows only that published experimental alternative; no permanent mib-2 allocation is inferred. The original unassigned clause and both editions remain available.
teLinkOutgoingIfId OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the link is unnumbered, the outgoing interface identifier is
set to the outgoing interface identifier chosen for the TE link
by the advertising LSR."
Dubuc et al. Expires May 2003 [Page 19]
Internet Draft MPLS Link Bundling MIB November 1, 2002
REFERENCE
"[BUNDLING]"
::= { teLinkEntry 10 }
Related source files and packages:
Status in source: current.
Names: teLinkOutgoingIfId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"teLinkOutgoingIfId",
"OBJECT-TYPE",
"SYNTAX",
"InterfaceIndexOrZero",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR.\"",
"REFERENCE",
"\"draft-ietf-mpls-bundle-03.txt - Link Bundling in MPLS Traffic Engineering, K. Kompella, Y. Rekhter, L. Berger, May 2002.\"",
"::=",
"{",
"teLinkEntry",
"10",
"}"
],
"syntax_tree": [
[
"row",
"InterfaceIndexOrZero"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR."
],
[
"REFERENCE",
"draft-ietf-mpls-bundle-03.txt - Link Bundling in MPLS Traffic Engineering, K. Kompella, Y. Rekhter, L. Berger, May 2002."
],
null,
null,
null
]
}Module: LINK-BUNDLING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'experimental', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-03; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
· Download draft-ietf-mpls-bundle-mib-03 — Link Bundling Management Information BaseRelated source files and packages:
Historical records
teLinkIncomingIfId OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For unnumbered links, the incoming interface is set to the
outgoing interface identifier chosen by the neighboring LSR
for the reverse link corresponding to this TE link."
REFERENCE
"draft-kompella-mpls-bundle-05.txt - Link Bundling in MPLS
Traffic Engineering, K. Kompella, Y. Rekhter, L. Berger,
February 2001."
::= { teLinkEntry 10 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.114.1.1.1.1 | teLinkNumberingType, teLinkIpAddrType | 0 | 0 | The TE link identifier type (numbered or unnumbered). |
| 1.3.6.1.3.114.1.1.1.2 | teLinkIpAddrType, teLinkIpAddr | 0 | 0 | Indicates whether the TE link address is IPv4 or IPv6 (numbered link). |
| 1.3.6.1.3.114.1.1.1.3 | teLinkIpAddr, teLinkRemoteIpAddr | 0 | 0 | For numbered links, this object represents the IP address associated with the TE link. |
| 1.3.6.1.3.114.1.1.1.4 | teLinkRemoteIpAddr, teLinkMetric | 0 | 0 | The remote IP address associated with the TE link (numbered links). |
| 1.3.6.1.3.114.1.1.1.5 | teLinkMetric, teLinkMuxCapability | 0 | 0 | The traffic engineering metric for the TE link is derived from its data-bearing channels. All data-bearing channels within the TE… |
| 1.3.6.1.3.114.1.1.1.6 | teLinkMuxCapability, teLinkProtectionType | 0 | 0 | This attribute specifies link multiplex capability of the TE link, which is derived from its data-bearing channels. All data-bear… |
| 1.3.6.1.3.114.1.1.1.7 | teLinkProtectionType, teLinkWorkingPriority | 0 | 0 | This attribute specifies link protection type of the TE link. |
| 1.3.6.1.3.114.1.1.1.8 | teLinkWorkingPriority, teLinkResourceClass | 0 | 0 | This object represents a priority value such that a new connection with a higher priority, i.e. numerically lower than this value… |
| 1.3.6.1.3.114.1.1.1.9 | teLinkResourceClass, teLinkIncomingIfId | 0 | 0 | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. The resource class for a link bundl… |
| 1.3.6.1.3.114.1.1.1.11 | teLinkOutgoingIfId, teLinkFlooding | 0 | 0 | If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link b… |
| 1.3.6.1.3.114.1.1.1.12 | teLinkFlooding, teLinkRowStatus | 0 | 0 | This object only has significance for link bundles which encoding type is not clear. For these link bundles, this object identifi… |
| 1.3.6.1.3.114.1.1.1.13 | teLinkRowStatus, teLinkStorageType | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.3.114.1.1.1.14 | teLinkStorageType | 0 | 0 | This variable indicates the storage type for this object. |