OID reference
1.3.6.1.3.114.1.1.1.3
For numbered links, this object represents the IP address associated with the TE link.
Identification
{1 3 6 1 3 114 1 1 1 3}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Extracted from a source document. Compare its source records.
teLinkRemoteIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The remote IP address associated with the TE link (IPv4 and
IPv6 numbered links)."
::= { teLinkEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from LINK-BUNDLING-MIB-mpls-00.txt · ietf_drafts · LINK-BUNDLING-MIB
Source file: Download LINK-BUNDLING-MIB-mpls-00.txt
Description 2
The remote IP address associated with the TE link (IPv4 and IPv6 numbered links).
IETF historical Internet-Draft definitions
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: teLinkRemoteIpAddr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"teLinkRemoteIpAddr",
"OBJECT-TYPE",
"SYNTAX",
"InetAddress",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The remote IP address associated with the TE link (IPv4 and IPv6 numbered links).\"",
"::=",
"{",
"teLinkEntry",
"3",
"}"
],
"syntax_tree": [
[
"row",
"InetAddress"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The remote IP address associated with the TE link (IPv4 and IPv6 numbered links)."
],
null,
null,
null,
null
]
}Module: LINK-BUNDLING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'experimental', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-03; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
· Download draft-ietf-mpls-bundle-mib-03 — Link Bundling Management Information BaseRelated source files and packages:
Module: LINK-BUNDLING-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-04; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
Source data warning: Qualified interim interpretation: this draft leaves the permanent root as { mib-2 xxx }, but explicitly says experimental 114 can be used in the interim. The earlier -03 draft independently declares that experimental root. This record follows only that published experimental alternative; no permanent mib-2 allocation is inferred. The original unassigned clause and both editions remain available.
· Download draft-ietf-mpls-bundle-mib-04 — Link Bundling Management Information BaseRelated source files and packages:
Historical records
teLinkIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For numbered links, this object represents the IP address
associated with the TE link."
::= { teLinkEntry 3 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.114.1.1.1.1 | teLinkNumberingType, teLinkIpAddrType | 0 | 0 | The TE link identifier type (numbered or unnumbered). |
| 1.3.6.1.3.114.1.1.1.2 | teLinkIpAddrType, teLinkIpAddr | 0 | 0 | Indicates whether the TE link address is IPv4 or IPv6 (numbered link). |
| 1.3.6.1.3.114.1.1.1.4 | teLinkRemoteIpAddr, teLinkMetric | 0 | 0 | The remote IP address associated with the TE link (numbered links). |
| 1.3.6.1.3.114.1.1.1.5 | teLinkMetric, teLinkMuxCapability | 0 | 0 | The traffic engineering metric for the TE link is derived from its data-bearing channels. All data-bearing channels within the TE… |
| 1.3.6.1.3.114.1.1.1.6 | teLinkMuxCapability, teLinkProtectionType | 0 | 0 | This attribute specifies link multiplex capability of the TE link, which is derived from its data-bearing channels. All data-bear… |
| 1.3.6.1.3.114.1.1.1.7 | teLinkProtectionType, teLinkWorkingPriority | 0 | 0 | This attribute specifies link protection type of the TE link. |
| 1.3.6.1.3.114.1.1.1.8 | teLinkWorkingPriority, teLinkResourceClass | 0 | 0 | This object represents a priority value such that a new connection with a higher priority, i.e. numerically lower than this value… |
| 1.3.6.1.3.114.1.1.1.9 | teLinkResourceClass, teLinkIncomingIfId | 0 | 0 | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. The resource class for a link bundl… |
| 1.3.6.1.3.114.1.1.1.10 | teLinkIncomingIfId, teLinkOutgoingIfId | 0 | 0 | For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the re… |
| 1.3.6.1.3.114.1.1.1.11 | teLinkOutgoingIfId, teLinkFlooding | 0 | 0 | If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link b… |
| 1.3.6.1.3.114.1.1.1.12 | teLinkFlooding, teLinkRowStatus | 0 | 0 | This object only has significance for link bundles which encoding type is not clear. For these link bundles, this object identifi… |
| 1.3.6.1.3.114.1.1.1.13 | teLinkRowStatus, teLinkStorageType | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.3.114.1.1.1.14 | teLinkStorageType | 0 | 0 | This variable indicates the storage type for this object. |