OID reference
1.3.6.1.3.114.1.6.1.3
This attribute specifies whether this data-bearing channel is currently used as primary or secondary channel.
Identification
{1 3 6 1 3 114 1 6 1 3}
| Value | Name |
|---|---|
| 1 | primary |
| 2 | secondary |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.3.114.1.6.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Extracted from a source document. Compare its source records.
componentLinkCurrentProtection OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies whether this component link is
currently used as primary or secondary link."
::= { componentLinkEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from LINK-BUNDLING-MIB-mpls-00.txt · ietf_drafts · LINK-BUNDLING-MIB
Source file: Download LINK-BUNDLING-MIB-mpls-00.txt
Description 2
This attribute specifies whether this component link is currently used as primary or secondary link.
IETF historical Internet-Draft definitions
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: componentLinkCurrentProtection
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"componentLinkCurrentProtection",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"primary",
"(",
"1",
")",
",",
"secondary",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute specifies whether this component link is currently used as primary or secondary link.\"",
"::=",
"{",
"componentLinkEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"primary",
1
],
[
"secondary",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute specifies whether this component link is currently used as primary or secondary link."
],
null,
null,
null,
null
]
}Module: LINK-BUNDLING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'experimental', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-03; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
componentLinkCurrentProtection OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
Dubuc et al. Expires November 2002 [Page 31]
Internet Draft MPLS Link Bundling MIB June 21, 2002
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies whether this component link is
currently used as primary or secondary link."
::= { componentLinkEntry 3 }
Related source files and packages:
Module: LINK-BUNDLING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'OSPF-MIB': ['RouterID'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Source data warning: Historical Internet-Draft draft-ietf-mpls-bundle-mib-04; current Datatracker states: Replaced, Dead, WG Document. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
Source data warning: Qualified interim interpretation: this draft leaves the permanent root as { mib-2 xxx }, but explicitly says experimental 114 can be used in the interim. The earlier -03 draft independently declares that experimental root. This record follows only that published experimental alternative; no permanent mib-2 allocation is inferred. The original unassigned clause and both editions remain available.
· Download draft-ietf-mpls-bundle-mib-04 — Link Bundling Management Information BaseRelated source files and packages:
Historical records
dataBearingChannelCurrentProtection OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute specifies whether this data-bearing channel is
currently used as primary or secondary channel."
::= { dataBearingChannelEntry 3 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.114.1.6.1.1 | dataBearingChannelLinkMuxCapability, componentLinkMuxCapability | 0 | 0 | This attribute specifies link multiplexing capabilities of the data-bearing channel. |
| 1.3.6.1.3.114.1.6.1.2 | dataBearingChannelPreferredProtection, componentLinkPreferredProtection | 0 | 0 | This attribute specifies whether this data-bearing channel is a primary or secondary entity. |
| 1.3.6.1.3.114.1.6.1.4 | dataBearingChannelRowStatus, componentLinkRowStatus | 0 | 0 | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.3.114.1.6.1.5 | dataBearingChannelStorageType, componentLinkStorageType | 0 | 0 | This variable indicates the storage type for this object. |