A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's mplsVpnVrfRouteProto value. If this information is not present, its value SHOULD be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid …
Definitions may combine these properties differently.
Compare 2 source variants
Variant 1 — Cisco, MIBdepot, and others
Value type
OBJECT IDENTIFIER
Maximum access defined by MIB
read-create
Status in MIB
current
Variant 2 — Cisco SMIv1
Value type
OBJECT IDENTIFIER
Maximum access defined by MIB
read-write
Status in MIB
mandatory
Using this OID with SNMP
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
Documented MIB packages
The FS.COM catalogue lists MIB packages containing this definition for these models:
A definition in a model's MIB package does not establish that the device implements it or permits access.
Meaning
Descriptions
1 unique
Identical descriptions are grouped. Different wording and device-specific notes are retained.
A reference to MIB definitions specific to the particular routing protocol which is responsi-
ble for this route, as determined by the value specified in the route's mplsVpnVrfRouteProto value. If this information is not present, its value SHOULD be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif-ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
Source data warning: Historical Internet-Draft draft-ietf-l3vpn-mpls-vpn-mib-01; current Datatracker states: RFC, RFC Published. An Internet-Draft is not an RFC or proof of final registration. Its numbers and descriptions may be provisional or obsolete; the SMI STATUS field describes the source object, not the publication status. Consult the exact draft and the relevant device or protocol edition.
Related ASN.1 definitions
mplsVpnVrfRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the
particular routing protocol which is responsi-
IETF L3 Working Group Expires July 2004 [Page 22]
Internet Draft MPLS L3 VPN MIB January 30, 2004
ble for this route, as determined by the value
specified in the route's mplsVpnVrfRouteProto
value. If this information is not present, its
value SHOULD be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntactically valid object
identif-ier, and any implementation conforming
to ASN.1 and the Basic Encoding Rules must be
able to generate and recognize this value."
::= { mplsVpnVrfRouteEntry 12 }
mplsVpnVrfRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the
particular routing protocol which is responsi-
ble for this route, as determined by the value
specified in the route's mplsVpnVrfRouteProto
value. If this information is not present, its
value SHOULD be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntactically valid object
identif-ier, and any implementation conforming
to ASN.1 and the Basic Encoding Rules must be
able to generate and recognize this value."
::= { mplsVpnVrfRouteEntry 12 }
Information from Cisco SMIv1
mplsVpnVrfRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A reference to MIB definitions specific to the
particular routing protocol which is responsi-
ble for this route, as determined by the value
specified in the route's mplsVpnVrfRouteProto
value. If this information is not present, its
value SHOULD be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntactically valid object
identif-ier, and any implementation conforming
to ASN.1 and the Basic Encoding Rules must be
able to generate and recognize this value."
::= { mplsVpnVrfRouteEntry 12 }
mplsVpnVrfRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the
particular routing protocol which is responsi-
ble for this route, as determined by the value
specified in the route's mplsVpnVrfRouteProto
value. If this information is not present, its
value SHOULD be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntactically valid object
identif-ier, and any implementation conforming
to ASN.1 and the Basic Encoding Rules must be
able to generate and recognize this value."
::= { mplsVpnVrfRouteEntry 12 }
Information from Cisco
mplsVpnVrfRouteInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the
particular routing protocol which is responsi-
ble for this route, as determined by the value
specified in the route's mplsVpnVrfRouteProto
value. If this information is not present, its
value SHOULD be set to the OBJECT IDENTIFIER
{ 0 0 }, which is a syntactically valid object
identif-ier, and any implementation conforming
to ASN.1 and the Basic Encoding Rules must be
able to generate and recognize this value."
::= { mplsVpnVrfRouteEntry 12 }
Registration
Registration authorities
First Registration Authority (inferred from ancestor 1.3.6.1.3.118)