An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.
Parsed from file ods-bridge.mib.txt
Company: ods
Module: RFCEnBridge-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
dot1dStpProtocolSpecification OBJECT-TYPE SYNTAX INTEGER { unknown(1), decLb100(2), ieee8021d(3) } ACCESS read-only STATUS mandatory DESCRIPTION "An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined." ::= { dot1dStp 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.14.2.1.0 | dot1dStpProtocolSpecification | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.14.2.2 | dot1dStpPriority | 1 | 1 | The value of the priority field which is contained in the first two octets of the (8 octet long) Bridge ID. The other (last) 6 o… |
| 1.3.6.1.3.14.2.3 | dot1dStpTimeSinceTopologyChange | 1 | 1 | The time (in hundreths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.3.14.2.4 | dot1dStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.3.14.2.5 | dot1dStpDesignatedRoot | 1 | 1 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.3.14.2.6 | dot1dStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.3.14.2.7 | dot1dStpRootPort | 1 | 1 | Identifies the port which offers the lowest cost path from this bridge to the root bridge. The value of this object indicates th… |
| 1.3.6.1.3.14.2.8 | dot1dStpMaxAge | 1 | 1 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.3.14.2.9 | dot1dStpHelloTime | 1 | 1 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.3.14.2.10 | dot1dStpHoldTime | 1 | 1 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.3.14.2.11 | dot1dStpForwardDelay | 1 | 1 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.3.14.2.12 | dot1dStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge is acting as the root. |
| 1.3.6.1.3.14.2.13 | dot1dStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge is acting as the root. |
| 1.3.6.1.3.14.2.14 | dot1dStpBridgeForwardDelay | 1 | 1 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. |
| 1.3.6.1.3.14.2.15 | dot1dStpPortTable | 1 | 12 | A table that contains port-specific information for the Spanning Tree Protocol. |