OID reference
1.3.6.1.3.37.1.3.1.1.6
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
Identification
{1 3 6 1 3 37 1 3 1 1 6}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | broadcast | 3 |
| 2 | ptToPt | 3 |
| 3 | staticIn | 3 |
| 4 | staticOut | 3 |
| 5 | dA | 3 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ISIS-MIB, the row index consists of these components in order:
isisSysInstance (Integer32): one numeric subidentifier for the non-negative value.isisCircIndex (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.3.37.1.3.1.1.6.<isisSysInstance>.<isisCircIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: isisSysInstance, isisCircIndex; isisSysInstance, isisCircIndex, isisCircLevelIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.3.37.1.3.1.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The FS.COM catalogue lists MIB packages containing this definition for these models:
N5860-48SC, N8560-32C, N8560-48BC, N8560-64C, NC8200-16Q, NC8200-24BC, NC8200-4TD, NC8200-8C, NC8400-16CD, NC8400-32C, NC8400-4TH, S3100-16TF.
S3410-24TS-P, S3910-24TS, S3910-48TS, S5810-28FS, S5810-28TS, S5810-48FS, S5810-48TS, S5810-48TS-P, S5860-20SQ, S5860-24XB-U, S5860-48SC.
A definition in a model's MIB package does not establish that the device implements it or permits access.
Available source records contain 4 distinct definitions; some records may not include a definition.
isisCircLevelLANDesISChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the LAN Designated
Intermediate System has changed at this level."
REFERENCE "ISIS.aoi
lanL2DesignatedIntermediateSystemChanges (76)"
::= { isisCircLevelEntry 6 }isisCircLevelHelloMultiplier OBJECT-TYPE
SYNTAX Integer32 (2..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
of hello packets from this IS"
REFERENCE "{ISIS.aoi iSISHelloTimer (45)}"
DEFVAL { 10 }
::= { isisCircLevelEntry 6 }isisCircType OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
ptToPt(2),
staticIn(3),
staticOut(4),
dA(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the circuit. This object follows the
replaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex."
REFERENCE "{ISIS.aoi type (33)}"
::= { isisCircEntry 6 }isisCircType OBJECT-TYPE
SYNTAX INTEGER
{
broadcast(1),
ptToPt(2),
staticIn(3),
staticOut(4),
dA(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the circuit. This object follows the
replaceOnlyWhileDisabled behavior. The type specified
must be compatible with the type of the interface defined
by the value of isisCircIfIndex."
REFERENCE "{ISIS.aoi type (33)}"
::= { isisCircEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
Implementation notes: The actually supported access is read-create
Huawei official enterprise MIB Query and object descriptions
Description 2
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
Implementation notes: The actually supported access is read-createread-only
Huawei official enterprise MIB Query and object descriptions
Description 3
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
Implementation notes: The actually supported access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 4
The number of times the LAN Designated Intermediate System has changed at this level.
Nokia networking MIB copies (LibreNMS/Observium Community)
Description 5
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Belden, GarrettCom and Hirschmann IT official standalone MIBs
Description 6
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
D-Link official switch MIBsFS.COM official Documentation Hub native MIB packagesHuawei MIB copies (LibreNMS/Observium Community)MIBdepot
Description 7
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex. 1 indicates broadcast and 2 stands for p2p.
Implementation notes: Currently, the maximum access is read-only.
Huawei official enterprise MIB Query and object descriptions
Description 8
The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
Implementation notes: The actually supported access is read-only
Huawei official enterprise MIB Query and object descriptions
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Description 1 · Description 2 · Description 3 · Description 6 · Description 8
Status in source: unspecified.
Names: isisCircType
{
"syntax": "INTEGER{broadcast(1),ptToPt(2),staticIn(3),staticOut(4),dA(5)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-create"
}Module: ISIS-MIB
· Download Huawei MIB Query — ISIS-MIB (derived data index)Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: unspecified.
Names: isisCircType
{
"syntax": "INTEGER{broadcast(1),ptToPt(2),staticIn(3),staticOut(4),dA(5)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-createread-only"
}Module: ISIS-MIB
Status in source: unspecified.
Names: isisCircType
{
"syntax": "INTEGER{broadcast(1),ptToPt(2),staticIn(3),staticOut(4),dA(5)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: unspecified.
Names: isisCircType
{
"syntax": "INTEGER{(broadcast,1),(ptToPt,2),(staticIn,3),(staticOut,4),(dA,5)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Status in source: current.
Names: isisCircType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisCircType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"broadcast",
"(",
"1",
")",
",",
"ptToPt",
"(",
"2",
")",
",",
"staticIn",
"(",
"3",
")",
",",
"staticOut",
"(",
"4",
")",
",",
"dA",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.\"",
"REFERENCE",
"\"{ISIS.aoi type (33)}\"",
"::=",
"{",
"isisCircEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"broadcast",
1
],
[
"ptToPt",
2
],
[
"staticIn",
3
],
[
"staticOut",
4
],
[
"dA",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The type of the circuit. This object follows the replaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex."
],
[
"REFERENCE",
"{ISIS.aoi type (33)}"
],
null,
null,
null
]
}Module: ISIS-MIB
See published definition above
{'IF-MIB': ['ifName'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'RFC1213-MIB': ['ifEntry', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'HUAWEI-ISIS-CONF-MIB': ['hwIsisAdjChangeReason']}Module: ISIS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Module: ISIS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610.zip.
Same file in 3610-MIB.rar.
Vendor MIB copy from the Observium Community archive. Huawei support.
Module: ISIS-MIB
{'IF-MIB': ['ifName'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'RFC1213-MIB': ['ifEntry', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Module: ISIS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'experimental', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Same file in s3410-series-swithes-snmp-mib-files.zip.
Status in source: unspecified.
Names: isisCircType
{
"syntax": "INTEGER{broadcast(1),ptToPt(2),staticIn(3),staticOut(4),dA(5)}",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "The actually supported access is read-only"
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Status in source: current.
Names: isisCircLevelLANDesISChanges
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisCircLevelLANDesISChanges",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of times the LAN Designated Intermediate System has changed at this level.\"",
"REFERENCE",
"\"ISIS.aoi lanL2DesignatedIntermediateSystemChanges (76)\"",
"::=",
"{",
"isisCircLevelEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of times the LAN Designated Intermediate System has changed at this level."
],
[
"REFERENCE",
"ISIS.aoi lanL2DesignatedIntermediateSystemChanges (76)"
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Nokia support.
Module: ISIS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Counter32', 'experimental'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: current.
Names: isisCircLevelHelloMultiplier
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"isisCircLevelHelloMultiplier",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"2",
".",
".",
"100",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS\"",
"REFERENCE",
"\"{ISIS.aoi iSISHelloTimer (45)}\"",
"DEFVAL",
"{",
"10",
"}",
"::=",
"{",
"isisCircLevelEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
2,
100
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS"
],
[
"REFERENCE",
"{ISIS.aoi iSISHelloTimer (45)}"
],
null,
null,
[
"DEFVAL",
10
]
]
}Vendor MIB copy from the Observium Community archive.
Module: ISIS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'experimental'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Module: ISIS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'TestAndIncr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'experimental'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: unspecified.
Names: isisCircType
{
"syntax": "Integer",
"max_access": "read-create",
"object_class": "table column",
"implementation_notes": "Currently, the maximum access is read-only."
}Module: ISIS-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — ISIS-MIB (derived data index)
Historical records
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.37.1.3.1.1.1 | isisCircIndex, isisCircLevelIndex | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.2 | isisCircIfIndex, isisCircLevelDefaultMetric, isisCircLevelMetric | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.3 | isisCircIfSubIndex, isisCircLevelISPriority | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.4 | isisCircAdminState, isisCircLevelCircID, isisCircLevelDesIS | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.5 | isisCircExistState, isisCircLevelDesIS, isisCircLevelLANDesISChanges | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.7 | isisCircExtDomain, isisCircLevelHelloMultiplier, isisCircLevelHelloTimer | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.8 | isisCircLevel, isisCircLevelHelloTimer, isisCircLevelDRHelloTimer | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.9 | isisCircPassiveCircuit, isisCircLevelDRHelloTimer, isisCircLevelLSPThrottle | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.10 | isisCircMeshGroupEnabled, isisCircLevelLSPThrottle, isisCircLevelMinLSPRetransInt | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.11 | isisCircMeshGroup, isisCircLevelMinLSPRetransInt, isisCircLevelCSNPInterval | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.12 | isisCircSmallHellos, isisCircLevelCSNPInterval, isisCircLevelPartSNPInterval | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.13 | isisCircLastUpTime, isisCircLevelPartSNPInterval | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.14 | isisCirc3WayEnabled | 0 | 0 | |
| 1.3.6.1.3.37.1.3.1.1.15 | isisCircExtendedCircID | 0 | 0 |