slapmPolicyMonitorControl OBJECT-TYPE SYNTAX BITS {
monitorMinRate(0),
monitorMaxRate(1),
monitorMaxDelay(2),
enableAggregateTraps(3),
enableSubcomponentTraps(4),
monitorSubcomponents(5)
}
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The value of this object determines the type and level
of monitoring that is applied to a policy/profile. The
value of this object can be changed once the table
entry that it is a part of is activated via a
slapmPolicyMonitorRowStatus transition to active state.
monitorMinRate(0) - Monitor minimum transfer rate.
monitorMaxRate(1) - Monitor maximum transfer rate.
monitorMaxDelay(2) - Monitor maximum delay.
enableAggregateTraps(3) - The enableAggregateTraps(3)
BITS setting enables notification generation
when monitoring a policy traffic profile as an
aggregate using the values in the corresponding
slapmPolicyStatsEntry. By default this function
is not enabled.
enableSubcomponentTraps(4) - This BITS setting enables
notification generation when monitoring all
subcomponents that are mapped to an corresponding
slapmPolicyStatsEntry. By default this
function is not enabled.
monitorSubcomponents(5) - This BITS setting enables
monitoring of each subcomponent (typically a
TCP connection or UDP listener) individually."
DEFVAL { { monitorMinRate, monitorMaxRate,
monitorMaxDelay } }
View at oid-info.com
The value of this object determines the type and level
of monitoring that is applied to a policy/profile. The
value of this object can't be changed once the table
entry that it is a part of is activated via a
slapmPolicyMonitorRowStatus transition to active state.
monitorMinRate(0) - Monitor minimum transfer rate.
monitorMaxRate(1) - Monitor maximum transfer rate.
monitorMaxDelay(2) - Monitor maximum delay.
enableAggregateTraps(3) - The enableAggregateTraps(3)
BITS setting enables notification generation
when monitoring a policy traffic profile as an
aggregate using the values in the corresponding
slapmPolicyStatsEntry. By default this function
is not enabled.
enableSubcomponentTraps(4) - This BITS setting enables
notification generation when monitoring all
subcomponents that are mapped to an corresponding
slapmPolicyStatsEntry. By default this
function is not enabled.
monitorSubcomponents(5) - This BITS setting enables
monitoring of each subcomponent (typically a
TCP connection or UDP listener) individually.
Parsed from file rfc2758-Service-Level-Agreements-Performance-Monitoring-SLAPM.mib.txt
Company: None
Module: SLAPM-MIB
The value of this object determines the type and level
of monitoring that is applied to a policy/profile. The
value of this object can't be changed once the table
entry that it is a part of is activated via a
slapmPolicyMonitorRowStatus transition to active state.
monitorMinRate(0) - Monitor minimum transfer rate.
monitorMaxRate(1) - Monitor maximum transfer rate.
monitorMaxDelay(2) - Monitor maximum delay.
enableAggregateTraps(3) - The enableAggregateTraps(3)
BITS setting enables notification generation
when monitoring a policy traffic profile as an
aggregate using the values in the corresponding
slapmPolicyStatsEntry. By default this function
is not enabled.
enableSubcomponentTraps(4) - This BITS setting enables
notification generation when monitoring all
subcomponents that are mapped to an corresponding
slapmPolicyStatsEntry. By default this
function is not enabled.
monitorSubcomponents(5) - This BITS setting enables
monitoring of each subcomponent (typically a
TCP connection or UDP listener) individually.
Parsed from file SLAPM-MIB.mib
Module: SLAPM-MIB
Automatically extracted from RFC2758
slapmPolicyMonitorControl OBJECT-TYPE SYNTAX BITS { monitorMinRate(0), monitorMaxRate(1), monitorMaxDelay(2), enableAggregateTraps(3), enableSubcomponentTraps(4), monitorSubcomponents(5) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The value of this object determines the type and level of monitoring that is applied to a policy/profile. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPolicyMonitorRowStatus transition to active state. monitorMinRate(0) - Monitor minimum transfer rate. monitorMaxRate(1) - Monitor maximum transfer rate. monitorMaxDelay(2) - Monitor maximum delay. enableAggregateTraps(3) - The enableAggregateTraps(3) BITS setting enables notification generation when monitoring a policy traffic profile as an aggregate using the values in the corresponding slapmPolicyStatsEntry. By default this function is not enabled. enableSubcomponentTraps(4) - This BITS setting enables notification generation when monitoring all subcomponents that are mapped to an corresponding slapmPolicyStatsEntry. By default this function is not enabled. monitorSubcomponents(5) - This BITS setting enables monitoring of each subcomponent (typically a TCP connection or UDP listener) individually." DEFVAL { { monitorMinRate, monitorMaxRate, monitorMaxDelay } } ::= { slapmPolicyMonitorEntry 5 }
slapmPolicyMonitorControl OBJECT-TYPE SYNTAX BITS { monitorMinRate(0), monitorMaxRate(1), monitorMaxDelay(2), enableAggregateTraps(3), enableSubcomponentTraps(4), monitorSubcomponents(5) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The value of this object determines the type and level of monitoring that is applied to a policy/profile. The value of this object can't be changed once the table entry that it is a part of is activated via a slapmPolicyMonitorRowStatus transition to active state. monitorMinRate(0) - Monitor minimum transfer rate. monitorMaxRate(1) - Monitor maximum transfer rate. monitorMaxDelay(2) - Monitor maximum delay. enableAggregateTraps(3) - The enableAggregateTraps(3) BITS setting enables notification generation when monitoring a policy traffic profile as an aggregate using the values in the corresponding slapmPolicyStatsEntry. By default this function is not enabled. enableSubcomponentTraps(4) - This BITS setting enables notification generation when monitoring all subcomponents that are mapped to an corresponding slapmPolicyStatsEntry. By default this function is not enabled. monitorSubcomponents(5) - This BITS setting enables monitoring of each subcomponent (typically a TCP connection or UDP listener) individually." DEFVAL { { monitorMinRate, monitorMaxRate, monitorMaxDelay } } ::= { slapmPolicyMonitorEntry 5 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.88.1.2.2.1.1 | slapmPolicyMonitorOwnerIndex | 0 | 0 | To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575,… |
| 1.3.6.1.3.88.1.2.2.1.2 | slapmPolicyMonitorSystemAddress | 0 | 0 | Address of a system that an Policy definition relates to. A zero length octet string can be used to indicate that only a single s… |
| 1.3.6.1.3.88.1.2.2.1.3 | slapmPolicyMonitorPolicyName | 0 | 0 | Policy name that this entry relates to. |
| 1.3.6.1.3.88.1.2.2.1.4 | slapmPolicyMonitorTrafficProfileName | 0 | 0 | The corresponding Traffic Profile name. |
| 1.3.6.1.3.88.1.2.2.1.6 | slapmPolicyMonitorStatus | 0 | 0 | The value of this object indicates when a monitored value has not meet a threshold or isn't meeting the defined service level. T… |
| 1.3.6.1.3.88.1.2.2.1.7 | slapmPolicyMonitorInterval | 0 | 0 | The number of seconds that defines the sample period. |
| 1.3.6.1.3.88.1.2.2.1.8 | slapmPolicyMonitorIntTime | 0 | 0 | The timestamp for when the last interval ended. |
| 1.3.6.1.3.88.1.2.2.1.9 | slapmPolicyMonitorCurrentInRate | 0 | 0 | Using the value of the corresponding slapmPolicyMonitorInterval, slapmPolicyStatsInOctets is sampled and then divided by slapmPol… |
| 1.3.6.1.3.88.1.2.2.1.10 | slapmPolicyMonitorCurrentOutRate | 0 | 0 | Using the value of the corresponding slapmPolicyMonitorInterval, slapmPolicyStatsOutOctets is sampled and then divided by slapmPo… |
| 1.3.6.1.3.88.1.2.2.1.11 | slapmPolicyMonitorMinRateLow | 0 | 0 | The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored minimum transfer rate has… |
| 1.3.6.1.3.88.1.2.2.1.12 | slapmPolicyMonitorMinRateHigh | 0 | 0 | The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored minimum transfer rate has increa… |
| 1.3.6.1.3.88.1.2.2.1.13 | slapmPolicyMonitorMaxRateHigh | 0 | 0 | The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored maximum transfer rate has… |
| 1.3.6.1.3.88.1.2.2.1.14 | slapmPolicyMonitorMaxRateLow | 0 | 0 | The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored maximum transfer rate has fallen… |
| 1.3.6.1.3.88.1.2.2.1.15 | slapmPolicyMonitorMaxDelayHigh | 0 | 0 | The threshold for generating a slapmMonitoredEventNotAchieved notification, signalling that a monitored maximum delay rate has be… |
| 1.3.6.1.3.88.1.2.2.1.16 | slapmPolicyMonitorMaxDelayLow | 0 | 0 | The threshold for generating a slapmMonitoredEventOkay notification, signalling that a monitored maximum delay rate has fallen to… |
| 1.3.6.1.3.88.1.2.2.1.17 | slapmPolicyMonitorMinInRateNotAchieves | 0 | 0 | The number of times that a minimum transfer in rate was not achieved. |
| 1.3.6.1.3.88.1.2.2.1.18 | slapmPolicyMonitorMaxInRateExceeds | 0 | 0 | The number of times that a maximum transfer in rate was exceeded. |
| 1.3.6.1.3.88.1.2.2.1.19 | slapmPolicyMonitorMaxDelayExceeds | 0 | 0 | The number of times that a maximum delay in rate was exceeded. |
| 1.3.6.1.3.88.1.2.2.1.20 | slapmPolicyMonitorMinOutRateNotAchieves | 0 | 0 | The number of times that a minimum transfer out rate was not achieved. |
| 1.3.6.1.3.88.1.2.2.1.21 | slapmPolicyMonitorMaxOutRateExceeds | 0 | 0 | The number of times that a maximum transfer out rate was exceeded. |
| 1.3.6.1.3.88.1.2.2.1.22 | slapmPolicyMonitorCurrentDelayRate | 0 | 0 | The current delay rate for this entry. This is calculated by taking the average of the TCP round trip times for all associating s… |
| 1.3.6.1.3.88.1.2.2.1.23 | slapmPolicyMonitorRowStatus | 0 | 0 | This object allows entries to be created and deleted in the slapmPolicyMonitorTable. An entry in this table is deleted by settin… |