mplsTeModuleCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for agents that support the
MPLS TE MIB."
MODULE -- this module
-- The mandatory group has to be implemented by all
-- LSRs that originate/terminate ESLSPs/tunnels.
-- In addition, depending on the type of tunnels
-- supported, other groups become mandatory as
-- explained below.
MANDATORY-GROUPS { mplsTunnelGroup }
GROUP mplsTunnelManualGroup
DESCRIPTION
"This group is mandatory for devices which support
manual configuration of tunnels, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelSignallingProto should be at least read-
only with a value of none(1)."
GROUP mplsTunnelSignaledGroup
DESCRIPTION
"This group is mandatory for devices which support
signaled tunnel set up, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelSignallingProto should be at least read-
only returning a value of ldp(2), or rsvp(3)."
GROUP mplsTunnelIsNotIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are not interfaces, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelIsIf must at least be read-only
returning false(1)."
GROUP mplsTunnelIsIntfcGroup
DESCRIPTION
"This group is mandatory for devices which support
tunnels that are interfaces, in addition to
mplsTunnelGroup. The following constraints apply:
mplsTunnelIsIf must at least be read-only
returning true(2)."
GROUP mplsTunnelOptionalGroup
DESCRIPTION
"Objects in this group are optional."
-- mplsTunnelTable
OBJECT mplsTunnelName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelIsIf
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelIfIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelXCPointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSignallingProto
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSetupPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHoldingPrio
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelSessionAttributes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelOwner
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelLocalProtectInUse
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourcePointer
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelInstancePriority
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopTableIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelARHopTableIndex
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelAdminStatus
SYNTAX INTEGER { up (1), down (2) }
MIN-ACCESS read-only
DESCRIPTION
"Only up and down states must be supported. Write
access is not required."
OBJECT mplsTunnelOperStatus
SYNTAX INTEGER { up (1), down (2) }
DESCRIPTION
"Only up and down states must be supported. Write
access is not required."
OBJECT mplsTunnelRowStatus
SYNTAX INTEGER { active(1), notInService(2),
createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
-- mplsTunnelHopTable
OBJECT mplsTunnelHopAddrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv4Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv4PrefixLen
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv6Addr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopIpv6PrefixLen
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopAsNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopLspId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelHopStrictOrLoose
SYNTAX INTEGER { strict(1) }
MIN-ACCESS read-only
DESCRIPTION
"loose(2) need not be supported. Write access is
not required."
OBJECT mplsTunnelHopRowStatus
SYNTAX INTEGER { active(1), notInService(2),
createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelHopStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
-- mplsTunnelResourceTable
OBJECT mplsTunnelResourceMaxRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMeanRate
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceMaxBurstSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mplsTunnelResourceRowStatus
SYNTAX INTEGER { active(1), notInService(2),
createAndGo(4), destroy(6) }
MIN-ACCESS read-only
DESCRIPTION
"The notReady(3) and createAndWait(5) states need
not be supported. Write access is not required."
OBJECT mplsTunnelResourceStorageType
SYNTAX INTEGER { other(1) }
MIN-ACCESS read-only
DESCRIPTION
"Only other (1) needs to be supported."
View at oid-info.com
Compliance statement for agents that support the
MPLS TE MIB.
Compliance statement for agents that support the
MPLS TE MIB.
Parsed from file MPLS-TE-MIB.mib
Module: MPLS-TE-MIB
mplsTeModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that support the MPLS TE MIB." MODULE MANDATORY-GROUPS { mplsTunnelGroup, mplsTunnelScalarGroup } GROUP mplsTunnelManualGroup DESCRIPTION "This group is mandatory for devices which support manual configuration of tunnels, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelSignallingProto should be at least read- only with a value of none(1)." GROUP mplsTunnelSignaledGroup DESCRIPTION "This group is mandatory for devices which support signaled tunnel set up, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelSignallingProto should be at least read- only returning a value of ldp(2), or rsvp(3)." GROUP mplsTunnelIsNotIntfcGroup DESCRIPTION "This group is mandatory for devices which support tunnels that are not interfaces, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelIsIf must at least be read-only returning false(1)." GROUP mplsTunnelIsIntfcGroup DESCRIPTION "This group is mandatory for devices which support tunnels that are interfaces, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelIsIf must at least be read-only returning true(2)." GROUP mplsTunnelOptionalGroup DESCRIPTION "Objects in this group are optional." OBJECT mplsTunnelName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelIsIf MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelIfIndex DESCRIPTION "Write access is not required." OBJECT mplsTunnelXCPointer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelSignallingProto MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelSetupPrio MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHoldingPrio MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelSessionAttributes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelOwner MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelLocalProtectInUse MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourcePointer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelInstancePriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPrimaryInstance MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPrimaryTimeUp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPathChanges MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelLastPathChange MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelCreationTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelStateTransitions MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopTableIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelARHopTableIndex DESCRIPTION "Write access is not required." OBJECT mplsTunnelCHopTableIndex DESCRIPTION "Write access is not required." OBJECT mplsTunnelAdminStatus SYNTAX INTEGER { up (1), down (2) } MIN-ACCESS read-only DESCRIPTION "Only up and down states must be supported. Write access is not required." OBJECT mplsTunnelOperStatus SYNTAX INTEGER { up (1), down (2) } DESCRIPTION "Only up and down states must be supported. Write access is not required." OBJECT mplsTunnelRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT mplsTunnelStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT mplsTunnelPathInUse MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT mplsTunnelRole SYNTAX INTEGER { head(1) } MIN-ACCESS read-only DESCRIPTION "Only support for head is required." OBJECT mplsTunnelTotalUpTime MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT mplsTunnelInstanceUpTime MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT mplsTunnelHopAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv4Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv4PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv6Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv6PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopAsNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopLspId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopType MIN-ACCESS read-only DESCRIPTION "loose(2) need not be supported. Write access is not required." OBJECT mplsTunnelHopRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT mplsTunnelHopStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT mplsTunnelResourceMaxRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourceMeanRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourceMaxBurstSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourceRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT mplsTunnelResourceStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT mplsTunnelPerfPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfHCPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfErrors MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfHCBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { mplsTeCompliances 1 }
mplsTeModuleCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for agents that support the MPLS TE MIB." MODULE MANDATORY-GROUPS { mplsTunnelGroup, mplsTunnelScalarGroup } GROUP mplsTunnelManualGroup DESCRIPTION "This group is mandatory for devices which support manual configuration of tunnels, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelSignallingProto should be at least read- only with a value of none(1)." GROUP mplsTunnelSignaledGroup DESCRIPTION "This group is mandatory for devices which support signaled tunnel set up, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelSignallingProto should be at least read- only returning a value of ldp(2), or rsvp(3)." GROUP mplsTunnelIsNotIntfcGroup DESCRIPTION "This group is mandatory for devices which support tunnels that are not interfaces, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelIsIf must at least be read-only returning false(1)." GROUP mplsTunnelIsIntfcGroup DESCRIPTION "This group is mandatory for devices which support tunnels that are interfaces, in addition to mplsTunnelGroup. The following constraints apply: mplsTunnelIsIf must at least be read-only returning true(2)." GROUP mplsTunnelOptionalGroup DESCRIPTION "Objects in this group are optional." OBJECT mplsTunnelName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelIsIf MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelIfIndex DESCRIPTION "Write access is not required." OBJECT mplsTunnelXCPointer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelSignallingProto MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelSetupPrio MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHoldingPrio MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelSessionAttributes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelOwner MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelLocalProtectInUse MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourcePointer MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelInstancePriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPrimaryInstance MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPrimaryTimeUp MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPathChanges MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelLastPathChange MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelCreationTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelStateTransitions MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopTableIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelARHopTableIndex DESCRIPTION "Write access is not required." OBJECT mplsTunnelCHopTableIndex DESCRIPTION "Write access is not required." OBJECT mplsTunnelAdminStatus SYNTAX INTEGER { up (1), down (2) } MIN-ACCESS read-only DESCRIPTION "Only up and down states must be supported. Write access is not required." OBJECT mplsTunnelOperStatus SYNTAX INTEGER { up (1), down (2) } DESCRIPTION "Only up and down states must be supported. Write access is not required." OBJECT mplsTunnelRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT mplsTunnelStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT mplsTunnelPathInUse MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT mplsTunnelRole SYNTAX INTEGER { head(1) } MIN-ACCESS read-only DESCRIPTION "Only support for head is required." OBJECT mplsTunnelTotalUpTime MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT mplsTunnelInstanceUpTime MIN-ACCESS read-only DESCRIPTION "Read-only support is required." OBJECT mplsTunnelHopAddrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv4Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv4PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv6Addr MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopIpv6PrefixLen MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopAsNumber MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopLspId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelHopType MIN-ACCESS read-only DESCRIPTION "loose(2) need not be supported. Write access is not required." OBJECT mplsTunnelHopRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT mplsTunnelHopStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT mplsTunnelResourceMaxRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourceMeanRate MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourceMaxBurstSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelResourceRowStatus SYNTAX INTEGER { active(1), notInService(2), createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "The notReady(3) and createAndWait(5) states need not be supported. Write access is not required." OBJECT mplsTunnelResourceStorageType SYNTAX INTEGER { other(1) } MIN-ACCESS read-only DESCRIPTION "Only other (1) needs to be supported." OBJECT mplsTunnelPerfPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfHCPackets MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfErrors MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT mplsTunnelPerfHCBytes MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { mplsTeCompliances 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.3.95.3.2.2 | mplsTeModuleReadOnlyCompliance | 0 | 0 | Compliance requirement for implementations that only provide read-only support for MPLS-TE-STD-MIB. Such devices can then be moni… |