Description 1
label distribution must be specified.
Sources for this description
MIBdepot
Parsed from MPLS-LDP-MIB.mib.txt · ietf_rfcs · MPLS-LDP-MIB
OID reference
1.3.6.1.3.9876.1.2.1.1.12
For any given LDP session, the method of label distribution must be specified.
Identification
{1 3 6 1 3 9876 1 2 1 1 12}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: mplsLdpEntityID.
snmpwalk [connection options] DEVICE .1.3.6.1.3.9876.1.2.1.1.12
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
mplsLdpEntityFailedInitSessionThreshold OBJECT-TYPE
SYNTAX INTEGER (-2147483648..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When attempting to establish a session with a
given Peer, the given LDP Entity should
send out a notification when exceeding this threshold.
A value of 0 (zero) for this object
indicates that the threshold is infinity.
In other words, a notification will not
be sent if the value of this object is 0 (zero)."
::= { mplsLdpEntityEntry 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from MPLS-LDP-MIB.mib.txt · ietf_rfcs · MPLS-LDP-MIB
Description 2
When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero).
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: mplsLdpEntityFailedInitSessionThreshold
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mplsLdpEntityFailedInitSessionThreshold",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"-",
"2147483648",
".",
".",
"2147483647",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero).\"",
"::=",
"{",
"mplsLdpEntityEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
-2147483648,
2147483647
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero)."
],
null,
null,
null,
null
]
}Module: MPLS-LDP-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TruthValue', 'TimeInterval', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY'], 'RFC1155-SMI': ['Gauge', 'Counter', 'experimental']}Module: MPLS-LDP-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TruthValue', 'TimeInterval', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY'], 'RFC1155-SMI': ['Gauge', 'Counter', 'experimental']}Historical records
mplsLdpEntityLabelDistMethod OBJECT-TYPE
SYNTAX INTEGER {
downstreamOnDemand(1),
downstreamUnsolicited(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For any given LDP session, the method of
label distribution must be specified."
::= { mplsLdpEntityEntry 12 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.9876.1.2.1.1.1 | mplsLdpEntityLdpId, mplsLdpEntityID | 0 | 0 | The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Swi… |
| 1.3.6.1.3.9876.1.2.1.1.2 | mplsLdpEntityLabelSpaceType, mplsLdpEntityIndex | 0 | 0 | This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIn… |
| 1.3.6.1.3.9876.1.2.1.1.3 | mplsLdpEntityProtocolVersion, mplsLdpEntityDefVpi | 0 | 0 | The version number of the protocol. The value of 0 on a read indicates that the version of the protocol is unknown. Otherwise, t… |
| 1.3.6.1.3.9876.1.2.1.1.4 | mplsLdpEntityDefVci, mplsLdpEntityAdminStatus | 0 | 0 | The Default VCI value used in the label for the default VCI. |
| 1.3.6.1.3.9876.1.2.1.1.5 | mplsLdpEntityOperStatus, mplsLdpEntityUnlabTrafVpi | 0 | 0 | The operational status of this LDP Entity. |
| 1.3.6.1.3.9876.1.2.1.1.6 | mplsLdpEntityTcpDscPort, mplsLdpEntityUnlabTrafVci | 0 | 0 | VCI value of the VCC supporting unlabeled traffic. |
| 1.3.6.1.3.9876.1.2.1.1.7 | mplsLdpEntityMergeCapability, mplsLdpEntityUdpDscPort | 0 | 0 | The UDP Discovery Port for LDP. The default value is the well-known value for this port. |
| 1.3.6.1.3.9876.1.2.1.1.8 | mplsLdpEntityMaxPduLength, mplsLdpEntityVcDirectionality | 0 | 0 | Sets the VC directionality for this LDP entity. |
| 1.3.6.1.3.9876.1.2.1.1.9 | mplsLdpEntityWellKnownDiscoveryPort | 0 | 0 | The well known LDP Discovery Port. |
| 1.3.6.1.3.9876.1.2.1.1.10 | mplsLdpEntityHelloHoldTimer, mplsLdpEntityMtu, mplsLdpEntityFailedInitSessionTrapEnable | 0 | 0 | The maximum transmission unit (MTU) that was configured for this entity. |
| 1.3.6.1.3.9876.1.2.1.1.11 | mplsLdpEntityKeepAliveHoldTimer, mplsLdpEntityInitSesThreshold | 0 | 0 | When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInit… |
| 1.3.6.1.3.9876.1.2.1.1.13 | mplsLdpEntityPVLimitMismatchTrapEnable, mplsLdpEntityLabelRetentionMode, mplsLdpEntityLabelDistributionMethod | 0 | 0 | Indicates whether the 'mplsLdpPathVectorLimitMismatch' trap should be generated. If the value of this object is 'enabled(1)' then … |
| 1.3.6.1.3.9876.1.2.1.1.14 | mplsLdpEntityPathVectorLimit, mplsLdpEntityPVLMisTrapEnable, mplsLdpEntityRowStatus | 0 | 0 | If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value gre… |
| 1.3.6.1.3.9876.1.2.1.1.15 | mplsLdpEntityPVL, mplsLdpEntityHopCountLoopDetection | 0 | 0 | If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value gre… |
| 1.3.6.1.3.9876.1.2.1.1.16 | mplsLdpEntityHopCountLimit, mplsLdpEntityHopCount | 0 | 0 | If the value of 'mplsLdpEntityHopCountLoopDetection' for this entry is 'enabled(1)', then this object represents the initial Hop … |
| 1.3.6.1.3.9876.1.2.1.1.17 | mplsLdpEntityTargetedPeer, mplsLdpEntityTargPeer | 0 | 0 | If this LDP entity uses targeted peer then set this to true. |
| 1.3.6.1.3.9876.1.2.1.1.18 | mplsLdpEntityTargPeerAddrType, mplsLdpEntityTargetedPeerAddrType | 0 | 0 | The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntityT… |
| 1.3.6.1.3.9876.1.2.1.1.19 | mplsLdpEntityTargetedPeerAddr, mplsLdpEntityTargPeerAddr | 0 | 0 | The value of the internetwork layer address used for the Extended Discovery. |
| 1.3.6.1.3.9876.1.2.1.1.20 | mplsLdpEntityOptionalParameters | 0 | 0 | Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters wil… |
| 1.3.6.1.3.9876.1.2.1.1.21 | mplsLdpEntityDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. … |
| 1.3.6.1.3.9876.1.2.1.1.22 | mplsLdpEntityStorType, mplsLdpEntityStorageType | 0 | 0 | The storage type for this entry. |