Description 1
Sources for this description
MIBdepot
Parsed from MPLS-LDP-MIB.mib.txt · ietf_rfcs · MPLS-LDP-MIB
OID reference
1.3.6.1.3.9876.1.2.1.1.5
The operational status of this LDP Entity.
Identification
{1 3 6 1 3 9876 1 2 1 1 5}
Definitions may combine these properties differently.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
mplsLdpEntityUnlabTrafVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VPI value of the VCC supporting unlabeled traffic."
DEFVAL { 0 }
::= { mplsLdpEntityEntry 5 }mplsLdpEntityUnlabTrafVpi OBJECT-TYPE
SYNTAX AtmVpaIdentifier
ACCESS read-write
STATUS mandatory
DESCRIPTION
"VPI value of the VCC supporting unlabeled traffic."
DEFVAL { 0 }
::= { mplsLdpEntityEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from MPLS-LDP-MIB.mib.txt · ietf_rfcs · MPLS-LDP-MIB
Description 2
VPI value of the VCC supporting unlabeled traffic.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: mplsLdpEntityUnlabTrafVpi
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mplsLdpEntityUnlabTrafVpi",
"OBJECT-TYPE",
"SYNTAX",
"AtmVpIdentifier",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"VPI value of the VCC supporting unlabeled traffic.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"mplsLdpEntityEntry",
"5",
"}"
],
"syntax_tree": [
[
"row",
"AtmVpIdentifier"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"VPI value of the VCC supporting unlabeled traffic."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: MPLS-LDP-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TruthValue', 'TimeInterval', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY'], 'RFC1155-SMI': ['Gauge', 'Counter', 'experimental']}Status in source: mandatory.
Names: mplsLdpEntityUnlabTrafVpi
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"mplsLdpEntityUnlabTrafVpi",
"OBJECT-TYPE",
"SYNTAX",
"AtmVpaIdentifier",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"VPI value of the VCC supporting unlabeled traffic.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"mplsLdpEntityEntry",
"5",
"}"
],
"syntax_tree": [
[
"row",
"AtmVpaIdentifier"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"VPI value of the VCC supporting unlabeled traffic."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: MPLS-LDP-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TruthValue', 'TimeInterval', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY'], 'RFC1155-SMI': ['Gauge', 'Counter', 'experimental']}Historical records
mplsLdpEntityOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of this LDP Entity."
::= { mplsLdpEntityEntry 5 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.3.9876.1.2.1.1.1 | mplsLdpEntityLdpId, mplsLdpEntityID | 0 | 0 | The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Swi… |
| 1.3.6.1.3.9876.1.2.1.1.2 | mplsLdpEntityLabelSpaceType, mplsLdpEntityIndex | 0 | 0 | This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIn… |
| 1.3.6.1.3.9876.1.2.1.1.3 | mplsLdpEntityProtocolVersion, mplsLdpEntityDefVpi | 0 | 0 | The version number of the protocol. The value of 0 on a read indicates that the version of the protocol is unknown. Otherwise, t… |
| 1.3.6.1.3.9876.1.2.1.1.4 | mplsLdpEntityDefVci, mplsLdpEntityAdminStatus | 0 | 0 | The Default VCI value used in the label for the default VCI. |
| 1.3.6.1.3.9876.1.2.1.1.6 | mplsLdpEntityTcpDscPort, mplsLdpEntityUnlabTrafVci | 0 | 0 | VCI value of the VCC supporting unlabeled traffic. |
| 1.3.6.1.3.9876.1.2.1.1.7 | mplsLdpEntityMergeCapability, mplsLdpEntityUdpDscPort | 0 | 0 | The UDP Discovery Port for LDP. The default value is the well-known value for this port. |
| 1.3.6.1.3.9876.1.2.1.1.8 | mplsLdpEntityMaxPduLength, mplsLdpEntityVcDirectionality | 0 | 0 | Sets the VC directionality for this LDP entity. |
| 1.3.6.1.3.9876.1.2.1.1.9 | mplsLdpEntityWellKnownDiscoveryPort | 0 | 0 | The well known LDP Discovery Port. |
| 1.3.6.1.3.9876.1.2.1.1.10 | mplsLdpEntityHelloHoldTimer, mplsLdpEntityMtu, mplsLdpEntityFailedInitSessionTrapEnable | 0 | 0 | The maximum transmission unit (MTU) that was configured for this entity. |
| 1.3.6.1.3.9876.1.2.1.1.11 | mplsLdpEntityKeepAliveHoldTimer, mplsLdpEntityInitSesThreshold | 0 | 0 | When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInit… |
| 1.3.6.1.3.9876.1.2.1.1.12 | mplsLdpEntityFailedInitSessionThreshold, mplsLdpEntityLabelDistMethod | 0 | 0 | For any given LDP session, the method of label distribution must be specified. |
| 1.3.6.1.3.9876.1.2.1.1.13 | mplsLdpEntityPVLimitMismatchTrapEnable, mplsLdpEntityLabelRetentionMode, mplsLdpEntityLabelDistributionMethod | 0 | 0 | Indicates whether the 'mplsLdpPathVectorLimitMismatch' trap should be generated. If the value of this object is 'enabled(1)' then … |
| 1.3.6.1.3.9876.1.2.1.1.14 | mplsLdpEntityPathVectorLimit, mplsLdpEntityPVLMisTrapEnable, mplsLdpEntityRowStatus | 0 | 0 | If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value gre… |
| 1.3.6.1.3.9876.1.2.1.1.15 | mplsLdpEntityPVL, mplsLdpEntityHopCountLoopDetection | 0 | 0 | If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value gre… |
| 1.3.6.1.3.9876.1.2.1.1.16 | mplsLdpEntityHopCountLimit, mplsLdpEntityHopCount | 0 | 0 | If the value of 'mplsLdpEntityHopCountLoopDetection' for this entry is 'enabled(1)', then this object represents the initial Hop … |
| 1.3.6.1.3.9876.1.2.1.1.17 | mplsLdpEntityTargetedPeer, mplsLdpEntityTargPeer | 0 | 0 | If this LDP entity uses targeted peer then set this to true. |
| 1.3.6.1.3.9876.1.2.1.1.18 | mplsLdpEntityTargPeerAddrType, mplsLdpEntityTargetedPeerAddrType | 0 | 0 | The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntityT… |
| 1.3.6.1.3.9876.1.2.1.1.19 | mplsLdpEntityTargetedPeerAddr, mplsLdpEntityTargPeerAddr | 0 | 0 | The value of the internetwork layer address used for the Extended Discovery. |
| 1.3.6.1.3.9876.1.2.1.1.20 | mplsLdpEntityOptionalParameters | 0 | 0 | Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters wil… |
| 1.3.6.1.3.9876.1.2.1.1.21 | mplsLdpEntityDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. … |
| 1.3.6.1.3.9876.1.2.1.1.22 | mplsLdpEntityStorType, mplsLdpEntityStorageType | 0 | 0 | The storage type for this entry. |