OID reference
1.3.6.1.4.1.11.2.26.4.10
L2 Interface specific configuration for ARP Application. Entry in this table will be dynamically created, when first IP Address is defined on specific L2 interface, and destroyed when the last IP address on this L2 interface is removed
Identification
{1 3 6 1 4 1 11 2 26 4 10}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsArpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsArpInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"L2 Interface specific configuration for ARP Application.
Entry in this table will be dynamically created,
when first IP Address is defined on specific L2 interface,
and destroyed when the last IP address on this L2 interface is removed"
::= { arpSpec 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
L2 Interface specific configuration for ARP Application. Entry in this table will be dynamically created, when first IP Address is defined on specific L2 interface, and destroyed when the last IP address on this L2 interface is removed
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rsArpInterfaceTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsArpInterfaceTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"RsArpInterfaceEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"L2 Interface specific configuration for ARP Application. Entry in this table will be dynamically created, when first IP Address is defined on specific L2 interface, and destroyed when the last IP address on this L2 interface is removed\"",
"::=",
"{",
"arpSpec",
"10",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"RsArpInterfaceEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"L2 Interface specific configuration for ARP Application. Entry in this table will be dynamically created, when first IP Address is defined on specific L2 interface, and destroyed when the last IP address on this L2 interface is removed"
],
null,
null,
null,
null
]
}Module: HPE-IP
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1930 2.5.0.42.
Same file in HPE Instant On 1930 2.8.1.35.
Same file in HPE Instant On 1930 3.2.0.8.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.4.10.1 | rsArpInterfaceEntry | 3 | 3 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.4.1 | rsArpDeleteTable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.2 | rsArpInactiveTimeOut | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.3 | rsArpProxy | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.4 | rsArpRequestsSent | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.5 | rsArpRepliesSent | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.6 | rsArpProxyRepliesSent | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.7 | rsArpUnresolveTimer | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.8 | rsArpMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.9 | rsArpStaticTable | 1 | 4 | |
| 1.3.6.1.4.1.11.2.26.4.11 | rsArpNumOfEntries | 0 | 0 |