OID reference
1.3.6.1.4.1.11.2.26.4.2
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table. Default value 0 means using value based on IP forwarding mode.
Identification
{1 3 6 1 4 1 11 2 26 4 2}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.11.2.26.4.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsArpInactiveTimeOut OBJECT-TYPE
SYNTAX Unsigned32 (0..40000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable defines the maximum time period (in second) that can
pass between ARP requests concerning an entry in the ARP table.
After this time period, the entry is deleted from the table.
Default value 0 means using value based on IP forwarding mode."
DEFVAL { 0 }
::= { arpSpec 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table. Default value 0 means using value based on IP forwarding mode.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rsArpInactiveTimeOut
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsArpInactiveTimeOut",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"40000000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table. Default value 0 means using value based on IP forwarding mode.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"arpSpec",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
40000000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table. Default value 0 means using value based on IP forwarding mode."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: HPE-IP
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1930 2.5.0.42.
Same file in HPE Instant On 1930 2.8.1.35.
Same file in HPE Instant On 1930 3.2.0.8.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IP
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipAddrEntry', 'IpAddressOriginTC', 'IpAddressStatusTC'], 'HPE-MIB': ['nm'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'PhysAddress', 'TimeStamp', 'RowPointer', 'TestAndIncr', 'StorageType'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength', 'InetVersion', 'InetZoneIndex']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.4.1 | rsArpDeleteTable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.3 | rsArpProxy | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.4 | rsArpRequestsSent | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.5 | rsArpRepliesSent | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.6 | rsArpProxyRepliesSent | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.7 | rsArpUnresolveTimer | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.8 | rsArpMibVersion | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.4.9 | rsArpStaticTable | 1 | 4 | |
| 1.3.6.1.4.1.11.2.26.4.10 | rsArpInterfaceTable | 1 | 4 | |
| 1.3.6.1.4.1.11.2.26.4.11 | rsArpNumOfEntries | 0 | 0 |