If active, the main router is considered inoperational and the IP interface operates as its backup.
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.26.6.3.1.3
If active, the main router is considered inoperational and the IP interface operates as its backup.
Identification
{1 3 6 1 4 1 11 2 26 6 3 1 3}
| Value | Name |
|---|---|
| 1 | active |
| 2 | inactive |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-IpRouter, the row index consists of these components in order:
ipRedundRoutersIfAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.ipRedundRoutersMainRouterAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.11.2.26.6.3.1.3.<ipRedundRoutersIfAddr: four octets>.<ipRedundRoutersMainRouterAddr: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: ipRedundRoutersIfAddr, ipRedundRoutersMainRouterAddr.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.6.3.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ipRedundRoutersOperStatus OBJECT-TYPE
SYNTAX INTEGER { active(1), inactive(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If active, the main router is considered inoperational and the IP
interface operates as its backup."
::= { ipRedundRoutersEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
If active, the main router is considered inoperational and the IP interface operates as its backup.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ipRedundRoutersOperStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ipRedundRoutersOperStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"inactive",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"If active, the main router is considered inoperational and the IP interface operates as its backup.\"",
"::=",
"{",
"ipRedundRoutersEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"inactive",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If active, the main router is considered inoperational and the IP interface operates as its backup."
],
null,
null,
null,
null
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.6.3.1.1 | ipRedundRoutersIfAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.2 | ipRedundRoutersMainRouterAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.4 | ipRedundRoutersPollInterval | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.5 | ipRedundRoutersTimeout | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.6 | ipRedundRoutersStatus | 0 | 0 |