Polling interval for this router (in seconds). If 0 the router is not polled.
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.26.6.3.1.4
Polling interval for this router (in seconds). If 0 the router is not polled.
Identification
{1 3 6 1 4 1 11 2 26 6 3 1 4}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-IpRouter, the row index consists of these components in order:
ipRedundRoutersIfAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.ipRedundRoutersMainRouterAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.11.2.26.6.3.1.4.<ipRedundRoutersIfAddr: four octets>.<ipRedundRoutersMainRouterAddr: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: ipRedundRoutersIfAddr, ipRedundRoutersMainRouterAddr.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.26.6.3.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ipRedundRoutersPollInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Polling interval for this router (in seconds). If 0 the router is not
polled."
DEFVAL { 3 }
::= { ipRedundRoutersEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Polling interval for this router (in seconds). If 0 the router is not polled.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ipRedundRoutersPollInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ipRedundRoutersPollInterval",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Polling interval for this router (in seconds). If 0 the router is not polled.\"",
"DEFVAL",
"{",
"3",
"}",
"::=",
"{",
"ipRedundRoutersEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Polling interval for this router (in seconds). If 0 the router is not polled."
],
null,
null,
null,
[
"DEFVAL",
3
]
]
}Module: HPE-IpRouter
See published definition above
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-IpRouter
{'HPE-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec'], 'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.26.6.3.1.1 | ipRedundRoutersIfAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.2 | ipRedundRoutersMainRouterAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.3 | ipRedundRoutersOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.5 | ipRedundRoutersTimeout | 0 | 0 | |
| 1.3.6.1.4.1.11.2.26.6.3.1.6 | ipRedundRoutersStatus | 0 | 0 |