| 1.3.6.1.4.1.11.2.3.9.1.1.1 |
gdStatusBytes | 0 | 0 |
The number of valid bytes in the gdStatusEntry array. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2 |
gdStatusEntry | 23 | 23 |
The networked peripheral's 32 octet status information that is shared between the peripheral and the LAN card. |
| 1.3.6.1.4.1.11.2.3.9.1.1.3 |
gdStatusDisplay | 0 | 0 |
The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet pl… |
| 1.3.6.1.4.1.11.2.3.9.1.1.4 |
gdStatusJobName | 0 | 0 |
The current job name set by the peripheral. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, … |
| 1.3.6.1.4.1.11.2.3.9.1.1.5 |
gdStatusSource | 0 | 0 |
A string indicating the name of the physical port or protocol the printer is currently getting data from. |
| 1.3.6.1.4.1.11.2.3.9.1.1.6 |
gdStatusPapstatus | 0 | 0 |
A string indicating the Appletalk papstatus response. |
| 1.3.6.1.4.1.11.2.3.9.1.1.7 |
gdStatusId | 0 | 0 |
A formatted string describing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.8 |
gdStatusDisplayCode | 0 | 0 |
This is the display code that the peripheral uses to tell the card what type of display the front panel of the printer is. |
| 1.3.6.1.4.1.11.2.3.9.1.1.10 |
gdStatusJobTimeout | 0 | 0 |
This value represents (in seconds) the maximum time of inactivity which must elapse before the JetDirect card switches from the c… |
| 1.3.6.1.4.1.11.2.3.9.1.1.11 |
gdStatusPjlUstatus | 0 | 0 |
This object will enable/disable PJL ustatus. |
| 1.3.6.1.4.1.11.2.3.9.1.1.12 |
gdStatusLaaSupport | 0 | 0 |
|
| 1.3.6.1.4.1.11.2.3.9.1.1.13 |
gdPasswords | 0 | 0 |
This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to… |
| 1.3.6.1.4.1.11.2.3.9.1.1.14 |
npPortNumPorts | 0 | 0 |
iThe number of peripheral interfaces supported by this device |
| 1.3.6.1.4.1.11.2.3.9.1.1.15 |
npPortType | 0 | 0 |
The type of the peripheral interface. A parallel port will return the specific protocl currently in use. If the parallel port … |
| 1.3.6.1.4.1.11.2.3.9.1.1.16 |
npSysModelNumber | 0 | 0 |
The HP model number of the device. |
| 1.3.6.1.4.1.11.2.3.9.1.1.17 |
npSysNetworkConnectors | 0 | 0 |
This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connecto… |
| 1.3.6.1.4.1.11.2.3.9.1.1.18 |
gdStatusAtPrinterName | 0 | 0 |
The AppleTalk name of the printer. |
| 1.3.6.1.4.1.11.2.3.9.1.1.19 |
gdStatusAtPrinterType | 0 | 0 |
The AppleTalk type of the printer. |