gdStatusLaaSupport OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This value represents what protocols Locally Administered addressing is supported over. This is currently 0 for 802.3 cards and 7 for 802.5 cards. LAA is not supported on 802.3. The value is a mask of bits, 1 for each of the protocols below. + | NA | NA | NA | NA | NA | TCP | LLC | NOV | + ::={ generalDeviceStatus 12 }
gdStatusLaaSupport OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "This value represents what protocols Locally Administered addressing is supported over. This is currently 0 for 802.3 cards and 7 for 802.5 cards. LAA is not supported on 802.3. The value is a mask of bits, 1 for each of the protocols below. + | NA | NA | NA | NA | NA | TCP | LLC | NOV | + ::={ generalDeviceStatus 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.1.1.1 | gdStatusBytes | 0 | 0 | The number of valid bytes in the gdStatusEntry array. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2 | gdStatusEntry | 23 | 23 | The networked peripheral's 32 octet status information that is shared between the peripheral and the LAN card. |
| 1.3.6.1.4.1.11.2.3.9.1.1.3 | gdStatusDisplay | 0 | 0 | The string diplayed on the peripheral front panel. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet pl… |
| 1.3.6.1.4.1.11.2.3.9.1.1.4 | gdStatusJobName | 0 | 0 | The current job name set by the peripheral. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, … |
| 1.3.6.1.4.1.11.2.3.9.1.1.5 | gdStatusSource | 0 | 0 | A string indicating the name of the physical port or protocol the printer is currently getting data from. |
| 1.3.6.1.4.1.11.2.3.9.1.1.6 | gdStatusPapstatus | 0 | 0 | A string indicating the Appletalk papstatus response. |
| 1.3.6.1.4.1.11.2.3.9.1.1.7 | gdStatusId | 0 | 0 | A formatted string describing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.8 | gdStatusDisplayCode | 0 | 0 | This is the display code that the peripheral uses to tell the card what type of display the front panel of the printer is. |
| 1.3.6.1.4.1.11.2.3.9.1.1.9 | gdStatusNlsCode | 0 | 0 | This value is the representation of what native language the printer is in currently. |
| 1.3.6.1.4.1.11.2.3.9.1.1.10 | gdStatusJobTimeout | 0 | 0 | This value represents (in seconds) the maximum time of inactivity which must elapse before the JetDirect card switches from the c… |
| 1.3.6.1.4.1.11.2.3.9.1.1.11 | gdStatusPjlUstatus | 0 | 0 | This object will enable/disable PJL ustatus. |
| 1.3.6.1.4.1.11.2.3.9.1.1.13 | gdPasswords | 0 | 0 | This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to… |
| 1.3.6.1.4.1.11.2.3.9.1.1.14 | npPortNumPorts | 0 | 0 | iThe number of peripheral interfaces supported by this device |
| 1.3.6.1.4.1.11.2.3.9.1.1.15 | npPortType | 0 | 0 | The type of the peripheral interface. A parallel port will return the specific protocl currently in use. If the parallel port … |
| 1.3.6.1.4.1.11.2.3.9.1.1.16 | npSysModelNumber | 0 | 0 | The HP model number of the device. |
| 1.3.6.1.4.1.11.2.3.9.1.1.17 | npSysNetworkConnectors | 0 | 0 | This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connecto… |
| 1.3.6.1.4.1.11.2.3.9.1.1.18 | gdStatusAtPrinterName | 0 | 0 | The AppleTalk name of the printer. |
| 1.3.6.1.4.1.11.2.3.9.1.1.19 | gdStatusAtPrinterType | 0 | 0 | The AppleTalk type of the printer. |