Indicates if the print engine sub-system in the device
is not ready. If there are no items in the collection
(i.e. no bits are set), then the print engine sub-
system is ready. If there is an item present, then the
item indicates what is causing the print engine sub-
system to be not ready. cDoorOpen is in the collection
if one or more access panels are open. If the device
contains more than one access panel, then NOT-READY-
PRINT-ENGINE-DOOR indicates which access panel(s) are
open. cInternalMediaJam is in the collection if one or
more pieces of media are jammed inside the device. If
the media is jammed at an input tray, cTrayMediaJam is
in the collection, and if the device has more than one
input tray, then NOT-READY-MEDIA-JAM-AT-TRAY indicates
which tray has a media jam. If the media is jammed at
an output bin, cBinMediaJam is in the collection, and if
the device has more than one output bin, then NOT-READY-
MEDIA-JAM-AT-BIN indicates which bin has a media jam.
cRequestedMediaUnavailable is in the collection if the
current print job requires media that is not available.
cTrayEmpty is in the collection if the current print job
requires media from an input tray that is empty. If the
device has more than one input tray, then NOT-READY-
TRAY-EMPTY indicates which tray is empty.
cOutputBinFull is in the collection if an output bin is
full. If the device has more than one output bin, then
NOT-READY-BIN-FULL indicates which bin is full.
cManualFeedMedia is in the collection if the device is
waiting for media to manually be fed.
cMarkingAgentMissing is in the collection if a marking
agent (toner cartridge, ink pen, etc.) is missing. If
the device has more than one marking agent, then NOT-
READY-MARKING-AGENT-MISSING indicates which marking
agent is missing. cMarkingAgentOut is in the collection
if the device is not ready due to one or more marking
agents being low or out. If the device has more than
one marking agent, then NOT-READY-MARKING-AGENT-LOW-OR-
OUT indicates which marking agent is low or out.
cIncorrectMarkingAgent is in the collection if the
device detects that an incorrect marking agent is
installed. If the device has more than one marking
agent, then NOT-READY-INCORRECT-MARKING-AGENT indicates
which marking agent location is loaded with the wrong
type of marking agent. cTrayMissing is in the
collection if the device is not ready because one or
more trays are not installed. If the device has more
than one input tray, then NOT-READY-TRAY-MISSING
indicates which tray is missing. cDeviceSpecific is in
the collection if one or more items are in either NOT-
READY-LASER-PRINT-ENGINE or NOT-READY-DESTINATION-
INKJET-PRINT-ENGINE-NOT-READY. cMediaPickMisfeed is in
the collection if the print engine detects the tray is
not empty, but can not pick up a sheet of media from
that tray. cMarkingAgentFailure indicates there is a
failure with a marking agent and it may need to be
replaced. If the device supports more than one marking
agent, then the NOT-READY-MARKING-AGENT-FAILURE object
indicates all the marking agents that have failed. The
POS will indicate the marking agent failure recovery
process, if any.
Parsed from file LJ4V.MIB.txt
Company: None
Module: LaserJet4V-MIB
Indicates if the print engine sub-system in the device
is not ready. If there are no items in the collection
(i.e. no bits are set), then the print engine sub-
system is ready. If there is an item present, then the
item indicates what is causing the print engine sub-
system to be not ready. cDoorOpen is in the collection
if one or more access panels are open. If the device
contains more than one access panel, then NOT-READY-
PRINT-ENGINE-DOOR indicates which access panel(s) are
open. cInternalMediaJam is in the collection if one or
more pieces of media are jammed inside the device. If
the media is jammed at an input tray, cTrayMediaJam is
in the collection, and if the device has more than one
input tray, then NOT-READY-MEDIA-JAM-AT-TRAY indicates
which tray has a media jam. If the media is jammed at
an output bin, cBinMediaJam is in the collection, and if
the device has more than one output bin, then NOT-READY-
MEDIA-JAM-AT-BIN indicates which bin has a media jam.
cRequestedMediaUnavailable is in the collection if the
current print job requires media that is not available.
cTrayEmpty is in the collection if the current print job
requires media from an input tray that is empty. If the
device has more than one input tray, then NOT-READY-
TRAY-EMPTY indicates which tray is empty.
cOutputBinFull is in the collection if an output bin is
full. If the device has more than one output bin, then
NOT-READY-BIN-FULL indicates which bin is full.
cManualFeedMedia is in the collection if the device is
waiting for media to manually be fed.
cMarkingAgentMissing is in the collection if a marking
agent (toner cartridge, ink pen, etc.) is missing. If
the device has more than one marking agent, then NOT-
READY-MARKING-AGENT-MISSING indicates which marking
agent is missing. cMarkingAgentOut is in the collection
if the device is not ready due to one or more marking
agents being low or out. If the device has more than
one marking agent, then NOT-READY-MARKING-AGENT-LOW-OR-
OUT indicates which marking agent is low or out.
cIncorrectMarkingAgent is in the collection if the
device detects that an incorrect marking agent is
installed. If the device has more than one marking
agent, then NOT-READY-INCORRECT-MARKING-AGENT indicates
which marking agent location is loaded with the wrong
type of marking agent. cTrayMissing is in the
collection if the device is not ready because one or
more trays are not installed. If the device has more
than one input tray, then NOT-READY-TRAY-MISSING
indicates which tray is missing. cDeviceSpecific is in
the collection if one or more items are in either NOT-
READY-LASER-PRINT-ENGINE or NOT-READY-DESTINATION-
INKJET-PRINT-ENGINE-NOT-READY. cMediaPickMisfeed is in
the collection if the print engine detects the tray is
not empty, but can not pick up a sheet of media from
that tray. cMarkingAgentFailure indicates there is a
failure with a marking agent and it may need to be
replaced. If the device supports more than one marking
agent, then the NOT-READY-MARKING-AGENT-FAILURE object
indicates all the marking agents that have failed. The
POS will indicate the marking agent failure recovery
process, if any.
Parsed from file LaserJet4V-MIB.mib
Module: LaserJet4V-MIB
Vendor: Hewlett-Packard
Module: HP-LASERJET-COMMON-MIB
[Automatically extracted from oidview.com]
not-ready-destination-print-engine OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Indicates if the print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the print engine sub- system is ready. If there is an item present, then the item indicates what is causing the print engine sub- system to be not ready. cDoorOpen is in the collection if one or more access panels are open. If the device contains more than one access panel, then NOT-READY- PRINT-ENGINE-DOOR indicates which access panel(s) are open. cInternalMediaJam is in the collection if one or more pieces of media are jammed inside the device. If the media is jammed at an input tray, cTrayMediaJam is in the collection, and if the device has more than one input tray, then NOT-READY-MEDIA-JAM-AT-TRAY indicates which tray has a media jam. If the media is jammed at an output bin, cBinMediaJam is in the collection, and if the device has more than one output bin, then NOT-READY- MEDIA-JAM-AT-BIN indicates which bin has a media jam. cRequestedMediaUnavailable is in the collection if the current print job requires media that is not available. cTrayEmpty is in the collection if the current print job requires media from an input tray that is empty. If the device has more than one input tray, then NOT-READY- TRAY-EMPTY indicates which tray is empty. cOutputBinFull is in the collection if an output bin is full. If the device has more than one output bin, then NOT-READY-BIN-FULL indicates which bin is full. cManualFeedMedia is in the collection if the device is waiting for media to manually be fed. cMarkingAgentMissing is in the collection if a marking agent (toner cartridge, ink pen, etc.) is missing. If the device has more than one marking agent, then NOT- READY-MARKING-AGENT-MISSING indicates which marking agent is missing. cMarkingAgentOut is in the collection if the device is not ready due to one or more marking agents being low or out. If the device has more than one marking agent, then NOT-READY-MARKING-AGENT-LOW-OR- OUT indicates which marking agent is low or out. cIncorrectMarkingAgent is in the collection if the device detects that an incorrect marking agent is installed. If the device has more than one marking agent, then NOT-READY-INCORRECT-MARKING-AGENT indicates which marking agent location is loaded with the wrong type of marking agent. cTrayMissing is in the collection if the device is not ready because one or more trays are not installed. If the device has more than one input tray, then NOT-READY-TRAY-MISSING indicates which tray is missing. cDeviceSpecific is in the collection if one or more items are in either NOT- READY-LASER-PRINT-ENGINE or NOT-READY-DESTINATION- INKJET-PRINT-ENGINE-NOT-READY. cMediaPickMisfeed is in the collection if the print engine detects the tray is not empty, but can not pick up a sheet of media from that tray. cMarkingAgentFailure indicates there is a failure with a marking agent and it may need to be replaced. If the device supports more than one marking agent, then the NOT-READY-MARKING-AGENT-FAILURE object indicates all the marking agents that have failed. The POS will indicate the marking agent failure recovery process, if any." ::= { status-prt-eng 1 }
not-ready-destination-print-engine OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS optional DESCRIPTION "Indicates if the print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits are set), then the print engine sub- system is ready. If there is an item present, then the item indicates what is causing the print engine sub- system to be not ready. cDoorOpen is in the collection if one or more access panels are open. If the device contains more than one access panel, then NOT-READY- PRINT-ENGINE-DOOR indicates which access panel(s) are open. cInternalMediaJam is in the collection if one or more pieces of media are jammed inside the device. If the media is jammed at an input tray, cTrayMediaJam is in the collection, and if the device has more than one input tray, then NOT-READY-MEDIA-JAM-AT-TRAY indicates which tray has a media jam. If the media is jammed at an output bin, cBinMediaJam is in the collection, and if the device has more than one output bin, then NOT-READY- MEDIA-JAM-AT-BIN indicates which bin has a media jam. cRequestedMediaUnavailable is in the collection if the current print job requires media that is not available. cTrayEmpty is in the collection if the current print job requires media from an input tray that is empty. If the device has more than one input tray, then NOT-READY- TRAY-EMPTY indicates which tray is empty. cOutputBinFull is in the collection if an output bin is full. If the device has more than one output bin, then NOT-READY-BIN-FULL indicates which bin is full. cManualFeedMedia is in the collection if the device is waiting for media to manually be fed. cMarkingAgentMissing is in the collection if a marking agent (toner cartridge, ink pen, etc.) is missing. If the device has more than one marking agent, then NOT- READY-MARKING-AGENT-MISSING indicates which marking agent is missing. cMarkingAgentOut is in the collection if the device is not ready due to one or more marking agents being low or out. If the device has more than one marking agent, then NOT-READY-MARKING-AGENT-LOW-OR- OUT indicates which marking agent is low or out. cIncorrectMarkingAgent is in the collection if the device detects that an incorrect marking agent is installed. If the device has more than one marking agent, then NOT-READY-INCORRECT-MARKING-AGENT indicates which marking agent location is loaded with the wrong type of marking agent. cTrayMissing is in the collection if the device is not ready because one or more trays are not installed. If the device has more than one input tray, then NOT-READY-TRAY-MISSING indicates which tray is missing. cDeviceSpecific is in the collection if one or more items are in either NOT- READY-LASER-PRINT-ENGINE or NOT-READY-DESTINATION- INKJET-PRINT-ENGINE-NOT-READY. cMediaPickMisfeed is in the collection if the print engine detects the tray is not empty, but can not pick up a sheet of media from that tray. cMarkingAgentFailure indicates there is a failure with a marking agent and it may need to be replaced. If the device supports more than one marking agent, then the NOT-READY-MARKING-AGENT-FAILURE object indicates all the marking agents that have failed. The POS will indicate the marking agent failure recovery process, if any." ::= { status-prt-eng 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.1.0 | not-ready-destination-print-engine | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.3 | not-ready-laser-print-engine | 1 | 1 | Indicates if the laser print engine sub-system in the device is not ready. If there are no items in the collection (i.e. no bits… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | total-engine-page-count | 1 | 1 | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supp… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 | total-mono-page-count | 0 | 0 | Total number of black pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 | total-color-page-count | 1 | 1 | Total number of color pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.8 | status-destination-print-engine | 1 | 1 | Indicates if part of the print engine sub-system is not functional, but the non-functional component(s) are not currently require… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 | duplex-page-count | 1 | 1 | Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.26 | print-engine-revision, not-idle-destination-print-engine | 1 | 1 | Print engine revision string. Additional information: Print engine revision string. The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.34 | print-engine-jam-count | 1 | 1 | Total number of pages jammed in the print engine's life time. The POS indicates if the total jam count is kept in NVRAM and the m… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.35 | print-engine-mispick-count | 1 | 1 | Total number of pages mispicked in the print engine's life time. The POS indicates if the total mispick count is kept in NVRAM an… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.37 | printer-calibration-dhalf | 5 | 7 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.38 | printer-calibration-cpr | 2 | 4 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.48 | supply-out-action-support | 0 | 0 | This object is used to determine if a particular capability that allows printing to continue after one or more cartridge has reac… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.49 | supply-out-device-state | 0 | 0 | This PML object indicates the current behavior of the device if one or more supplies have reached out. If no supply has reached o… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.50 | supply-after-out-state | 0 | 0 | This object is used to read and write the various status flags indicating whether the consumable was used after out. The collecti… |