The UDP port number in the UDP message header.
Sources for this description
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
OID reference
1.3.6.1.4.1.11.2.42.1.1.1
The UDP port number in the UDP message header.
Identification
{1 3 6 1 4 1 11 2 42 1 1 1}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-UDP, the row index consists of these components in order:
rsUdpRelayDstPort (INTEGER): one numeric subidentifier for the non-negative value.rsUdpRelaySrcIpInf (IpAddress): four numeric subidentifiers, one per IPv4 address octet.rsUdpRelayDstIpAddr (IpAddress): four numeric subidentifiers, one per IPv4 address octet.An instance has the form .1.3.6.1.4.1.11.2.42.1.1.1.<rsUdpRelayDstPort>.<rsUdpRelaySrcIpInf: four octets>.<rsUdpRelayDstIpAddr: four octets>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rsUdpRelayDstPort, rsUdpRelaySrcIpInf, rsUdpRelayDstIpAddr.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.42.1.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rsUdpRelayDstPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP port number in the UDP message header."
::= {rsUdpRelayEntry 1}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The UDP port number in the UDP message header.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rsUdpRelayDstPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rsUdpRelayDstPort",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The UDP port number in the UDP message header.\"",
"::=",
"{",
"rsUdpRelayEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The UDP port number in the UDP message header."
],
null,
null,
null,
null
]
}Module: HPE-UDP
See published definition above
{'IP-MIB': ['ipAddrEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-UDP
{'IP-MIB': ['ipAddrEntry'], 'HPE-MIB': ['nm'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'IP-FORWARD-MIB': ['ipCidrRouteEntry', 'ipCidrRouteDest', 'ipCidrRouteMask', 'ipCidrRouteTos', 'ipCidrRouteNextHop'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.42.1.1.2 | rsUdpRelaySrcIpInf | 0 | 0 | |
| 1.3.6.1.4.1.11.2.42.1.1.3 | rsUdpRelayDstIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.11.2.42.1.1.4 | rsUdpRelayStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.42.1.1.5 | rsUdpRelayUserInfo | 0 | 0 |