OID reference
1.3.6.1.4.1.11.2.53.5.1.1
The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present.
Identification
{1 3 6 1 4 1 11 2 53 5 1 1}
| Value | Name |
|---|---|
| 1 | on |
| 2 | off |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-Physicaldescription-MIB, the row index consists of these components in order:
rlPhdModuleStackUnit (INTEGER): one numeric subidentifier for the non-negative value.rlPhdModuleIndex (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11.2.53.5.1.1.<rlPhdModuleStackUnit>.<rlPhdModuleIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlPhdModuleStackUnit, rlPhdModuleIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.53.5.1.1
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPhdModuleHotSwapAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the module. The off(1) state indicates
that the module is not used and its rlPhdModuleHotSwapOperStatus
is always off(2).
The on{1) state indicates that the module may be used and its
rlPhdModuleHotSwapOperStatus will be on(1) if it presents and
off(2) if it does not present."
DEFVAL { on }
::= { rlPhdModuleHotSwapEntry 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPhdModuleHotSwapAdminStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPhdModuleHotSwapAdminStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"on",
"(",
"1",
")",
",",
"off",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present.\"",
"DEFVAL",
"{",
"on",
"}",
"::=",
"{",
"rlPhdModuleHotSwapEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"on",
1
],
[
"off",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The desired state of the module. The off(1) state indicates that the module is not used and its rlPhdModuleHotSwapOperStatus is always off(2). The on{1) state indicates that the module may be used and its rlPhdModuleHotSwapOperStatus will be on(1) if it presents and off(2) if it does not present."
],
null,
null,
null,
[
"DEFVAL",
"on"
]
]
}Module: HPE-Physicaldescription-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-Physicaldescription-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'Q-BRIDGE-MIB': ['PortList'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1930 2.5.0.42.
Same file in HPE Instant On 1930 2.8.1.35.
Same file in HPE Instant On 1930 3.2.0.8.
Module: HPE-Physicaldescription-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-Physicaldescription-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'Q-BRIDGE-MIB': ['PortList'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.53.5.1.2 | rlPhdModuleHotSwapOperStatus | 0 | 0 |