OID reference
1.3.6.1.4.1.11.2.53.5.1.2
The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and o…
Identification
{1 3 6 1 4 1 11 2 53 5 1 2}
| Value | Name |
|---|---|
| 1 | on |
| 2 | off |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-Physicaldescription-MIB, the row index consists of these components in order:
rlPhdModuleStackUnit (INTEGER): one numeric subidentifier for the non-negative value.rlPhdModuleIndex (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.11.2.53.5.1.2.<rlPhdModuleStackUnit>.<rlPhdModuleIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlPhdModuleStackUnit, rlPhdModuleIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.53.5.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPhdModuleHotSwapOperStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Hot Swap state of the module.
If rlPhdModuleHotSwapAdminStatus is down(2) then
rlPhdModuleHotSwapOperStatus should be down(2). If
rlPhdModuleHotSwapAdminStatus is changed to up(1) then
rlPhdModuleHotSwapOperStatus should change to
up(1) if the module presents; it should remain in the down(2) state if
and only if the module does not present."
::= { rlPhdModuleHotSwapEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPhdModuleHotSwapOperStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPhdModuleHotSwapOperStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"on",
"(",
"1",
")",
",",
"off",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present.\"",
"::=",
"{",
"rlPhdModuleHotSwapEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"on",
1
],
[
"off",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The current Hot Swap state of the module. If rlPhdModuleHotSwapAdminStatus is down(2) then rlPhdModuleHotSwapOperStatus should be down(2). If rlPhdModuleHotSwapAdminStatus is changed to up(1) then rlPhdModuleHotSwapOperStatus should change to up(1) if the module presents; it should remain in the down(2) state if and only if the module does not present."
],
null,
null,
null,
null
]
}Module: HPE-Physicaldescription-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1830 2.5.0.48.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1960 2.8.1.35.
Module: HPE-Physicaldescription-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'Q-BRIDGE-MIB': ['PortList'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1930 2.5.0.42.
Same file in HPE Instant On 1930 2.8.1.35.
Same file in HPE Instant On 1930 3.2.0.8.
Module: HPE-Physicaldescription-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-Physicaldescription-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex', 'InterfaceIndex'], 'HPE-MIB': ['nm', 'rndNotifications'], 'MAU-MIB': ['JackType'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'TimeTicks', 'NOTIFICATION-TYPE', 'Unsigned32'], 'Q-BRIDGE-MIB': ['PortList'], 'HPE-HWENVIROMENT': ['RlEnvMonState'], 'ENTITY-SENSOR-MIB': ['EntitySensorStatus', 'EntitySensorValue'], 'HPE-DEVICEPARAMS-MIB': ['rndErrorDesc', 'rndErrorSeverity']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.53.5.1.1 | rlPhdModuleHotSwapAdminStatus | 0 | 0 |