OID reference
1.3.6.1.4.1.11.2.59.4.2.1.4
The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).
Identification
{1 3 6 1 4 1 11 2 59 4 2 1 4}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-POLICY-MIB, the row index rlPolicyMeteringClassIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.59.4.2.1.4.<rlPolicyMeteringClassIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlPolicyMeteringClassIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.59.4.2.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPolicyMeteringClassAggregateMeterBurstSize OBJECT-TYPE
SYNTAX INTEGER
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Burst Size parameter for the aggregate meter leaky bucket. A
value of 0 means that the device should choose the Burst Size
that it thinks is most suitable for the rule.
The interval can be derived from (burstSizex8/Rate)."
DEFVAL { 0 }
::= { rlPolicyMeteringClassEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyMeteringClassAggregateMeterBurstSize
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyMeteringClassAggregateMeterBurstSize",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"UNITS",
[
"literal",
"22627974657322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlPolicyMeteringClassEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
[
"UNITS",
"bytes"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate)."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: HPE-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.59.4.2.1.1 | rlPolicyMeteringClassIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.2 | rlPolicyMeteringClassAlwaysConform | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.3 | rlPolicyMeteringClassAggregateMeterRate | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.5 | rlPolicyMeteringClassPerSessionMeteringRate | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.6 | rlPolicyMeteringClassMaxSessionLimit | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.7 | rlPolicyMeteringClassActionPointer | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.8 | rlPolicyMeteringClassFailMeterPointer | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.9 | rlPolicyMeteringClassStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.10 | rlPolicyMeteringCounterEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.11 | rlPolicyMeteringClassInProfileCounter | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.12 | rlPolicyMeteringClassOutProfileCounter | 0 | 0 |