OID reference
1.3.6.1.4.1.11.2.59.4.2.1.8
Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used.
Identification
{1 3 6 1 4 1 11 2 59 4 2 1 8}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HPE-POLICY-MIB, the row index rlPolicyMeteringClassIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.11.2.59.4.2.1.8.<rlPolicyMeteringClassIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: rlPolicyMeteringClassIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.59.4.2.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlPolicyMeteringClassFailMeterPointer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies an index in the rlPolicyMeterClassTable. This
is the meter that is to be used if the packet is out-of-profile
relative to the current meter.
If non-Diffserv mode, this field is not used.
If the current meter is AlwaysConform, this field is not used."
DEFVAL { 0 }
::= { rlPolicyMeteringClassEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlPolicyMeteringClassFailMeterPointer
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlPolicyMeteringClassFailMeterPointer",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"rlPolicyMeteringClassEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: HPE-POLICY-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-POLICY-MIB
{'IF-MIB': ['InterfaceIndexOrZero', 'InterfaceIndex'], 'HPE-MIB': ['Percents', 'VlanPriority', 'nm'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'RowPointer', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'zeroDotZero', 'MODULE-IDENTITY', 'Counter64'], 'Q-BRIDGE-MIB': ['PortList', 'VlanId'], 'DIFF-SERV-MIB': ['diffServClassifierEntry'], 'HPE-BRIDGEMIBOBJECTS-MIB': ['VlanList1', 'VlanList2', 'VlanList3', 'VlanList4']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.59.4.2.1.1 | rlPolicyMeteringClassIndex | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.2 | rlPolicyMeteringClassAlwaysConform | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.3 | rlPolicyMeteringClassAggregateMeterRate | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.4 | rlPolicyMeteringClassAggregateMeterBurstSize | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.5 | rlPolicyMeteringClassPerSessionMeteringRate | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.6 | rlPolicyMeteringClassMaxSessionLimit | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.7 | rlPolicyMeteringClassActionPointer | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.9 | rlPolicyMeteringClassStatus | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.10 | rlPolicyMeteringCounterEnable | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.11 | rlPolicyMeteringClassInProfileCounter | 0 | 0 | |
| 1.3.6.1.4.1.11.2.59.4.2.1.12 | rlPolicyMeteringClassOutProfileCounter | 0 | 0 |