OID reference
1.3.6.1.4.1.11.2.95.12.1.13
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
Identification
{1 3 6 1 4 1 11 2 95 12 1 13}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rldot1xAuthMultiDiagPortNumber, rldot1xAuthMultiDiagSourceMac.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.95.12.1.13
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rldot1xAuthMultiBackendOtherRequestsToSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
sends an EAP-Request packet (other than an Identity,
Notification, Failure or Success message) to the
Supplicant (i.e., executes txReq on entry to the
REQUEST state). Indicates that the Authenticator chose
an EAP-method."
REFERENCE
"9.4.2, 8.5.6.2.3"
::= { rldot1xAuthMultiDiagEntry 13 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rldot1xAuthMultiBackendOtherRequestsToSupplicant
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rldot1xAuthMultiBackendOtherRequestsToSupplicant",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.\"",
"REFERENCE",
"\"9.4.2, 8.5.6.2.3\"",
"::=",
"{",
"rldot1xAuthMultiDiagEntry",
"13",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method."
],
[
"REFERENCE",
"9.4.2, 8.5.6.2.3"
],
null,
null,
null
]
}Module: HPE-DOT1X-MIB
See published definition above
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-DOT1X-MIB
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.95.12.1.1 | rldot1xAuthMultiDiagPortNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.2 | rldot1xAuthMultiDiagSourceMac | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.3 | rldot1xAuthMultiEntersConnecting | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.4 | rldot1xAuthMultiEntersAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.5 | rldot1xAuthMultiAuthSuccessWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.6 | rldot1xAuthMultiAuthFailWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.7 | rldot1xAuthMultiAuthReauthsWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.8 | rldot1xAuthMultiAuthEapStartsWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.9 | rldot1xAuthMultiAuthReauthsWhileAuthenticated | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.10 | rldot1xAuthMultiAuthEapStartsWhileAuthenticated | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.11 | rldot1xAuthMultiBackendResponses | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.12 | rldot1xAuthMultiBackendAccessChallenges | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.14 | rldot1xAuthMultiBackendNonNakResponsesFromSupplicant | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.15 | rldot1xAuthMultiBackendAuthSuccesses | 0 | 0 |