OID reference
1.3.6.1.4.1.11.2.95.12.1.14
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Sup…
Identification
{1 3 6 1 4 1 11 2 95 12 1 14}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: rldot1xAuthMultiDiagPortNumber, rldot1xAuthMultiDiagSourceMac.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11.2.95.12.1.14
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rldot1xAuthMultiBackendNonNakResponsesFromSupplicant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts the number of times that the state machine
receives a response from the Supplicant to an initial
EAP-Request, and the response is something other than
EAP-NAK (i.e., rxResp becomes TRUE, causing the state
machine to transition from REQUEST to RESPONSE,
and the response is not an EAP-NAK). Indicates that
the Supplicant can respond to the Authenticators
chosen EAP-method."
REFERENCE
"9.4.2, 8.5.6.2.4"
::= { rldot1xAuthMultiDiagEntry 14 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.
HPE networking MIB copies (LibreNMS/Observium Community)HPE Instant On official MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rldot1xAuthMultiBackendNonNakResponsesFromSupplicant
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rldot1xAuthMultiBackendNonNakResponsesFromSupplicant",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.\"",
"REFERENCE",
"\"9.4.2, 8.5.6.2.4\"",
"::=",
"{",
"rldot1xAuthMultiDiagEntry",
"14",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method."
],
[
"REFERENCE",
"9.4.2, 8.5.6.2.4"
],
null,
null,
null
]
}Module: HPE-DOT1X-MIB
See published definition above
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Same file in HPE Instant On 1960 2.6.0.73.
Same file in HPE Instant On 1960 2.7.0.103.
Same file in HPE Instant On 1930 2.6.0.73.
Same file in HPE Instant On 1960 2.8.1.35.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: HPE-DOT1X-MIB
{'HPE-MIB': ['nm'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qFdbId'], 'IEEE8021-PAE-MIB': ['PaeControlledPortStatus', 'dot1xAuthSessionStatsEntry', 'dot1xPaePortNumber'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.95.12.1.1 | rldot1xAuthMultiDiagPortNumber | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.2 | rldot1xAuthMultiDiagSourceMac | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.3 | rldot1xAuthMultiEntersConnecting | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.4 | rldot1xAuthMultiEntersAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.5 | rldot1xAuthMultiAuthSuccessWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.6 | rldot1xAuthMultiAuthFailWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.7 | rldot1xAuthMultiAuthReauthsWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.8 | rldot1xAuthMultiAuthEapStartsWhileAuthenticating | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.9 | rldot1xAuthMultiAuthReauthsWhileAuthenticated | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.10 | rldot1xAuthMultiAuthEapStartsWhileAuthenticated | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.11 | rldot1xAuthMultiBackendResponses | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.12 | rldot1xAuthMultiBackendAccessChallenges | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.13 | rldot1xAuthMultiBackendOtherRequestsToSupplicant | 0 | 0 | |
| 1.3.6.1.4.1.11.2.95.12.1.15 | rldot1xAuthMultiBackendAuthSuccesses | 0 | 0 |