OID reference

apexProgramBasedPmtOffset

1.3.6.1.4.1.1166.1.31.15.1.1.9

Description

Program Based PID Remapping PMT PID offset. Determines the first PMT PID to use when Program Based algorithm selected. PMT PID is calculated as: (Program Number + Offset) * 16 Program Numbers can range from 1 - 255, allowing for PMTs to start at 0x0020 or 0x0030 up to 0x1000 and 0x1010. Changes to offset will NOT requ…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.1166.1.31.15.1.1 (apexPsiConfigGeneral)
Node code
9
Node name
apexProgramBasedPmtOffset
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.1166.1.31.15.1.1.9
URN notation
urn:oid:1.3.6.1.4.1.1166.1.31.15.1.1.9
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 1166 1 31 15 1 1 9}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) gi(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) giMIB(1166) giproducts(1) apex(31) apexPsi(15) apexPsiConfig(1) apexPsiConfigGeneral(1) apexProgramBasedPmtOffset(9)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/1166/1/31/15/1/1/9
  • /ISO/Identified-Organization/6/1/4/1/1166/1/31/15/1/1/9
  • /ISO/3/6/1/4/1/1166/1/31/15/1/1/9
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/1166/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/enterprise/gi/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/enterprise/giMIB/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/enterprises/1166/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/enterprises/gi/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/enterprises/giMIB/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/1166/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/gi/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/giMIB/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/vendor-objects/1166/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/vendor-objects/gi/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/identified-organization/dod/internet/private/vendor-objects/giMIB/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/org/dod/internet/private/enterprise/1166/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/org/dod/internet/private/enterprise/gi/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/org/dod/internet/private/enterprise/giMIB/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • /iso/org/dod/internet/private/enterprises/1166/giproducts/apex/apexPsi/apexPsiConfig/apexPsiConfigGeneral/apexProgramBasedPmtOffset
  • Additional combinations skipped.

SNMP properties

Value type
Integer32
Maximum access defined by MIB
read-write
Status in MIB
current

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1166.1.31.15.1.1.9.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

apexProgramBasedPmtOffset OBJECT-TYPE
    SYNTAX Integer32(1 | 2)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Program Based PID Remapping PMT PID offset. Determines the first
         PMT PID to use when Program Based algorithm selected. PMT PID
         is calculated as:
            (Program Number + Offset) * 16
         
         Program Numbers can range from 1 - 255, allowing for PMTs to start
         at 0x0020 or 0x0030 up to 0x1000 and 0x1010. 

         Changes to offset will NOT require a reboot, but if there are 
         any service mappings already in use on an output in 
         Program Based mode, then the change will NOT take effect and the 
         user will have to remove all mappings on outputs in Program 
         Based mode.
         
         Once written, the change to this parameter will take immediate effect.
         However, in order for the change to persist through subsequent reboots
         or power cycles, the change must be saved via the apexSaveConfig parameter.

         @Config(config=yes, reboot=no)
         @Save(apexSaveConfig, value=2)
         @File(config.ini, type='ini')
        "
::= { apexPsiConfigGeneral 9 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Program Based PID Remapping PMT PID offset. Determines the first PMT PID to use when Program Based algorithm selected. PMT PID is calculated as: (Program Number + Offset) * 16 Program Numbers can range from 1 - 255, allowing for PMTs to start at 0x0020 or 0x0030 up to 0x1000 and 0x1010. Changes to offset will NOT require a reboot, but if there are any service mappings already in use on an output in Program Based mode, then the change will NOT take effect and the user will have to remove all mappings on outputs in Program Based mode. Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

apexProgramBasedPmtOffset · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: apexProgramBasedPmtOffset

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "apexProgramBasedPmtOffset",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "1",
    "|",
    "2",
    ")",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Program Based PID Remapping PMT PID offset. Determines the first PMT PID to use when Program Based algorithm selected. PMT PID is calculated as: (Program Number + Offset) * 16 Program Numbers can range from 1 - 255, allowing for PMTs to start at 0x0020 or 0x0030 up to 0x1000 and 0x1010. Changes to offset will NOT require a reboot, but if there are any service mappings already in use on an output in Program Based mode, then the change will NOT take effect and the user will have to remove all mappings on outputs in Program Based mode. Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini') \"",
    "::=",
    "{",
    "apexPsiConfigGeneral",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            1
          ],
          [
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Program Based PID Remapping PMT PID offset. Determines the first PMT PID to use when Program Based algorithm selected. PMT PID is calculated as: (Program Number + Offset) * 16 Program Numbers can range from 1 - 255, allowing for PMTs to start at 0x0020 or 0x0030 up to 0x1000 and 0x1010. Changes to offset will NOT require a reboot, but if there are any service mappings already in use on an output in Program Based mode, then the change will NOT take effect and the user will have to remove all mappings on outputs in Program Based mode. Once written, the change to this parameter will take immediate effect. However, in order for the change to persist through subsequent reboots or power cycles, the change must be saved via the apexSaveConfig parameter. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2) @File(config.ini, type='ini')"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1166)

Fred Gotwald

Siblings (10)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.1166.1.31.15.1.1.1 apexPsiDetectionEnabled00
1.3.6.1.4.1.1166.1.31.15.1.1.2 apexPsiDetectionTimeout00
1.3.6.1.4.1.1166.1.31.15.1.1.3 apexPsiRangeStart00
1.3.6.1.4.1.1166.1.31.15.1.1.4 apexPsiRangeStop00
1.3.6.1.4.1.1166.1.31.15.1.1.5 apexPatVersionIncrement00
1.3.6.1.4.1.1166.1.31.15.1.1.6 apexPmtVersionIncrement00
1.3.6.1.4.1.1166.1.31.15.1.1.7 apexEcmEmmFirstPid00
1.3.6.1.4.1.1166.1.31.15.1.1.8 apexEcmEmmNumberPids00
1.3.6.1.4.1.1166.1.31.15.1.1.10 apexPsiCcErrorDetectionTimeout00
1.3.6.1.4.1.1166.1.31.15.1.1.11 apexPsiCcErrorDetectionEnabled00