Description 1
Enter the PVID number of the port, 1-4094
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.11863.6.14.1.1.1.1.3
Enter the PVID number of the port, 1-4094
Identification
{1 3 6 1 4 1 11863 6 14 1 1 1 1 3}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | disable | 2 |
| 1 | enable | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: ifIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.11863.6.14.1.1.1.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
vlanPortPvid OBJECT-TYPE
SYNTAX INTEGER(1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the PVID number of the port, 1-4094"
::= { vlanPortConifgEntry 3 }vlanPortIngressCheck OBJECT-TYPE
SYNTAX INTEGER{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"0.ACCESS:The ACCESS port can be added in a single VLAN,and the
egress rule of the port is UNTAG. The PVID is same as the current
VLAN ID. If the current VLAN is deleted,the PVID will be set to 1
by default.
1.TRUNK:The TRUNK port can be added in multiple VLANs, and the
egress rule of the port is TAG. The PVID can be set as the VID
number of any VLAN the port belongs to.
2.GENERAL:The GENERAL port can be added in multiple VLANs and set
various egress rules according to the different VLANs. The default
egress rule is UNTAG. The PVID can be set as the VID number of any
VLAN the port belongs to."
::= { vlanPortConifgEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Enter the PVID number of the port, 1-4094
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Description 2
0.ACCESS:The ACCESS port can be added in a single VLAN,and the egress rule of the port is UNTAG. The PVID is same as the current VLAN ID. If the current VLAN is deleted,the PVID will be set to 1 by default. 1.TRUNK:The TRUNK port can be added in multiple VLANs, and the egress rule of the port is TAG. The PVID can be set as the VID number of any VLAN the port belongs to. 2.GENERAL:The GENERAL port can be added in multiple VLANs and set various egress rules according to the different VLANs. The default egress rule is UNTAG. The PVID can be set as the VID number of any VLAN the port belongs to.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: vlanPortPvid
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vlanPortPvid",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"4094",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Enter the PVID number of the port, 1-4094\"",
"::=",
"{",
"vlanPortConifgEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
4094
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Enter the PVID number of the port, 1-4094"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: TPLINK-DOT1Q-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: TPLINK-DOT1Q-VLAN-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Status in source: current.
Names: vlanPortIngressCheck
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"vlanPortIngressCheck",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"0",
")",
",",
"enable",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"0.ACCESS:The ACCESS port can be added in a single VLAN,and the egress rule of the port is UNTAG. The PVID is same as the current VLAN ID. If the current VLAN is deleted,the PVID will be set to 1 by default. 1.TRUNK:The TRUNK port can be added in multiple VLANs, and the egress rule of the port is TAG. The PVID can be set as the VID number of any VLAN the port belongs to. 2.GENERAL:The GENERAL port can be added in multiple VLANs and set various egress rules according to the different VLANs. The default egress rule is UNTAG. The PVID can be set as the VID number of any VLAN the port belongs to.\"",
"::=",
"{",
"vlanPortConifgEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
0
],
[
"enable",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"0.ACCESS:The ACCESS port can be added in a single VLAN,and the egress rule of the port is UNTAG. The PVID is same as the current VLAN ID. If the current VLAN is deleted,the PVID will be set to 1 by default. 1.TRUNK:The TRUNK port can be added in multiple VLANs, and the egress rule of the port is TAG. The PVID can be set as the VID number of any VLAN the port belongs to. 2.GENERAL:The GENERAL port can be added in multiple VLANs and set various egress rules according to the different VLANs. The default egress rule is UNTAG. The PVID can be set as the VID number of any VLAN the port belongs to."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: TPLINK-DOT1Q-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE'], 'TPLINK-MIB': ['tplinkMgmt'], 'RFC1213-MIB': ['ifIndex'], 'TPLINK-TC-MIB': ['TPRowStatus']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11863.6.14.1.1.1.1.1 | vlanPortNumber | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.14.1.1.1.1.2 | vlanPortType, vlanPortPvid | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.14.1.1.1.1.4 | vlanPortLag, vlanPortAcceptFrameType | 0 | 0 | |
| 1.3.6.1.4.1.11863.6.14.1.1.1.1.5 | vlanPortUnknown, vlanPortLag | 0 | 0 |