The hardware revision number of this
controller (1.0, 1.1, ...).
Parsed from file Compaq-Ix1.mib.txt
Company: compaq
Module: IX1MIB
Vendor: Compaq
Module: IX1MIB (Compaq-Ix1.mib)
Type: TABULAR
Access: read-only
Syntax: HWRevisionType
Automatically extracted from www.mibdepot.com
ix1ControllerHwRevision OBJECT-TYPE SYNTAX HWRevisionType ACCESS read-only STATUS mandatory DESCRIPTION "The hardware revision number of this controller (1.0, 1.1, ...)." ::= { ix1ControllerEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1195.1.1.1.1.1.1 | ix1ifIndex | 0 | 0 | This is the value of the interface id in the interface table that corresponds to this controller. |
1.3.6.1.4.1.1195.1.1.1.1.1.2 | ix1ControllerNumber | 0 | 0 | The controller number to identify this controller. |
1.3.6.1.4.1.1195.1.1.1.1.1.3 | ix1ControllerLongName | 0 | 0 | The long name for this controller. |
1.3.6.1.4.1.1195.1.1.1.1.1.4 | ix1ControllerShortName | 0 | 0 | The short name for this controller. |
1.3.6.1.4.1.1195.1.1.1.1.1.5 | ix1ControllerSerialNumber | 0 | 0 | The serialnumber of this controller. |
1.3.6.1.4.1.1195.1.1.1.1.1.6 | ix1ControllerHwVariation | 0 | 0 | The hardware variation of this controller (EISA, So, Upo, ...). |
1.3.6.1.4.1.1195.1.1.1.1.1.8 | ix1ControllerHwMemSize | 0 | 0 | The amount of main memory on this controller in Megabytes. |
1.3.6.1.4.1.1195.1.1.1.1.1.9 | ix1ControllerHwPiggy1 | 0 | 0 | The type of the first piggy-adapter. |
1.3.6.1.4.1.1195.1.1.1.1.1.10 | ix1ControllerHwPiggy2 | 0 | 0 | The type of the second piggy-adapter. |
1.3.6.1.4.1.1195.1.1.1.1.1.11 | ix1ControllerHwPiggy3 | 0 | 0 | The type of the third piggy-adapter. |
1.3.6.1.4.1.1195.1.1.1.1.1.12 | ix1ControllerHwPiggy4 | 0 | 0 | The type of the fourth piggy-adapter. |
1.3.6.1.4.1.1195.1.1.1.1.1.13 | ix1ControllerHwPrimType | 0 | 0 | The hardware type of this primary borad. |
1.3.6.1.4.1.1195.1.1.1.1.1.14 | ix1ControllerHwServicePort | 0 | 0 | The presence of the hardware service port. |
1.3.6.1.4.1.1195.1.1.1.1.1.15 | ix1ControllerSwMajorVersion | 0 | 0 | The major version of the firmware. |
1.3.6.1.4.1.1195.1.1.1.1.1.16 | ix1ControllerSwMinorVersion | 0 | 0 | The minor version of the firmware. |
1.3.6.1.4.1.1195.1.1.1.1.1.17 | ix1ControllerSwPrototype | 0 | 0 | Specifies whether this is a test or a released version of the firmware |
1.3.6.1.4.1.1195.1.1.1.1.1.18 | ix1ControllerSwType | 0 | 0 | The type of the software of this controller (Octo, Primary, Basic). |
1.3.6.1.4.1.1195.1.1.1.1.1.19 | ix1ControllerSwDChannelMask | 0 | 0 | Bitfield that specifies which D channel protocols are supported by the curently loaded firmware. This fact is indepandant from the… |
1.3.6.1.4.1.1195.1.1.1.1.1.20 | ix1ControllerSwVersionString | 0 | 0 | The version string of the firmware. |
1.3.6.1.4.1.1195.1.1.1.1.1.21 | ix1ControllerAccDChProtocol | 0 | 0 | The d channel protocol of this controller. |
1.3.6.1.4.1.1195.1.1.1.1.1.22 | ix1ControllerAccConnectionType | 0 | 0 | The connection type of this controller point-to-point or point-to-multipoint. |
1.3.6.1.4.1.1195.1.1.1.1.1.23 | ix1ControllerAccLineAccessType | 0 | 0 | The configuration of the line access of this controller. Specifes whether to use a dialup-line or a leased-line |
1.3.6.1.4.1.1195.1.1.1.1.1.24 | ix1ControllerAccPermanentSide | 0 | 0 | The D channel configuration for leased lines. Specifies whether the controller should operate as network side (nt-side) or as term… |
1.3.6.1.4.1.1195.1.1.1.1.1.25 | ix1ControllerAccBundle | 0 | 0 | The bundling mode for this controller. Specifies whether this leased line should be used as one bundled channel or as multiple cha… |
1.3.6.1.4.1.1195.1.1.1.1.1.26 | ix1ControllerAccUseDChannel | 0 | 0 | Defines the use of the d channel for leased lines. |
1.3.6.1.4.1.1195.1.1.1.1.1.27 | ix1ControllerAccClock | 0 | 0 | The source for the clock for PRI controllers using leased lines. If the clock_from_adapter is choosen the controller generates th… |
1.3.6.1.4.1.1195.1.1.1.1.1.28 | ix1ControllerAccTei | 0 | 0 | The Terminal Endpoint Identifier used on layer 2 of the d channel protocol. |
1.3.6.1.4.1.1195.1.1.1.1.1.29 | ix1ControllerAccAutoTei | 0 | 0 | This item tells between manual and automatic tei. If the option automatic is enabled, the value tei is set to zero and can be ign… |
1.3.6.1.4.1.1195.1.1.1.1.1.30 | ix1ControllerSpid1 | 0 | 0 | Spid for b channel 1. |
1.3.6.1.4.1.1195.1.1.1.1.1.31 | ix1ControllerDirectoryNumber1 | 0 | 0 | Directory Number for b channel 1. |
1.3.6.1.4.1.1195.1.1.1.1.1.32 | ix1ControllerSpid2 | 0 | 0 | Spid for b channel 2. |
1.3.6.1.4.1.1195.1.1.1.1.1.33 | ix1ControllerDirectoryNumber2 | 0 | 0 | Directory Number for b channel 2. |
1.3.6.1.4.1.1195.1.1.1.1.1.34 | ix1ControllerCompressionSelect | 0 | 0 | Switch on or off the negotiation of V.42bis compression |
1.3.6.1.4.1.1195.1.1.1.1.1.35 | ix1ControllerAction | 0 | 0 | This field specifies the possiblity to renitialize an adapter. |