dynamicObjectTableConfigID

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dynamicObjectTableConfigID",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "65535",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.2.2 \"",
    "::=",
    "{",
    "profilesSTMP",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.2.2"
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hdlcGroupAddressTable",
    "OBJECT-TYPE",
    "SYNTAX",
    "SEQUENCE",
    "OF",
    "HdlcGroupAddressEntry",
    "ACCESS",
    "not-accessible",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> A table containing group addresses at which a device may receive frames. <TableType> static <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.3.2\"",
    "::=",
    "{",
    "profilesPMPP",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "conceptualTable",
      [
        "row",
        "HdlcGroupAddressEntry"
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> A table containing group addresses at which a device may receive frames. <TableType> static <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.3.2"
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dynamicObjectTable-ConfigID",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "0",
    ".",
    ".",
    "65535",
    ")",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. \"",
    "::=",
    "{",
    "profilesSTMP",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            0,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline."
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dynamicObjectTableConfigID",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "0",
    ".",
    ".",
    "65535",
    ")",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition> Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. <Informative> This object has been deprecated along with STMP. <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.2.2\"",
    "::=",
    "{",
    "profilesSTMP",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            0,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition> Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. <Informative> This object has been deprecated along with STMP. <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.2.2"
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dynamicObjectTableConfigID",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "(",
    "0",
    ".",
    ".",
    "65535",
    ")",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "deprecated",
    "DESCRIPTION",
    "\"<Definition> Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. <Supplanted by> ISO26048-1-DynObj.fdOwnerDynObjConfigID <Informative> This object has been deprecated along with STMP. <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.2.2\"",
    "::=",
    "{",
    "profilesSTMP",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32",
      [
        "integerSubType",
        [
          [
            0,
            65535
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "deprecated"
    ],
    [
      "DESCRIPTION",
      "<Definition> Specifies a relatively unique ID (e.g., this could be a counter, a check-sum, etc.) for the current values stored in the dynObjVariable and dynObjConfigOwner objects for all dynamic objects with a dynObjStatus of valid. This value shall be calculated on the change of any dynObjStatus to or from the valid state. This value reported by this object shall not change unless there has been a change in the data since the last request; however a genErr shall be returned if the unique ID value has not yet been updated. A management station will be able to detect any change in the configuration of dynamic objects by monitoring this value after it has established a baseline. <Supplanted by> ISO26048-1-DynObj.fdOwnerDynObjConfigID <Informative> This object has been deprecated along with STMP. <Object Identifier> 1.3.6.1.4.1.1206.4.1.2.2.2"
    ],
    null,
    null,
    null,
    null
  ]
}