OID reference

dmsIllumBrightnessValuesError

1.3.6.1.4.1.1206.4.2.3.7.8

Description

Indicates the error encountered when the brightness table was SET.

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.1206.4.2.3.7 (illum)
Node code: 8
Node name: dmsIllumBrightnessValuesError
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.1206.4.2.3.7.8
URN notation: urn:oid:1.3.6.1.4.1.1206.4.2.3.7.8

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 1206 4 2 3 7 8}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) dms(3) illum(7) dmsIllumBrightnessValuesError(8)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) fontDefinition(3) illum(7) dmsIllumBrightnessValuesError(8)}
Additional combinations skipped.

OID-IRI notation

/1/3/6/1/4/1/1206/4/2/3/7/8
/ISO/Identified-Organization/6/1/4/1/1206/4/2/3/7/8
/ISO/3/6/1/4/1/1206/4/2/3/7/8

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/ldap-enterprise/1206/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/ldap-enterprise/nema/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/vendor-objects/1206/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/dms/illum/dmsIllumBrightnessValuesError
/iso/identified-organization/dod/internet/private/vendor-objects/nema/transportation/devices/fontDefinition/illum/dmsIllumBrightnessValuesError
Additional combinations skipped.

SNMP properties

Value type: INTEGER
Maximum access defined by MIB: read-only
Status in MIB: mandatory, current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — NTCIP published standard MIB annexes (reviewed modules), ITE public NTCIP working repository MIBs

Value type: INTEGER
Maximum access defined by MIB: read-only
Status in MIB: mandatory

Variant 2 — ITE public NTCIP working repository MIBs

Value type: INTEGER
Maximum access defined by MIB: read-only
Status in MIB: current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

Value	Name	Source variants
1	other	1, 2
2	none	1, 2
3	photocellGap	1, 2
4	negativeSlope	1, 2
5	tooManyLevels	1, 2
6	invalidData	1, 2

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.3.7.8.0

Replace the placeholders with your connection and authentication options. Some definitions do not specify a readable access value. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Published definitions

Available source records contain 5 distinct definitions; some records may not include a definition.

Show 5 published definitions

dmsIllumBrightnessValuesError · mandatory

dmsIllumBrightnessValuesError OBJECT-TYPE
SYNTAX         INTEGER {
                         other (1),
                         none (2),
                         photocellGap (3),
                         negativeSlope (4),
                         tooManyLevels (5),
                         invalidData (6)
                         }
ACCESS         read-only
STATUS         mandatory
DESCRIPTION “Indicates the error encountered when the brightness table was SET.”
::= {illum 8}

dmsIllumBrightnessValuesError · mandatory

dmsIllumBrightnessValuesError  OBJECT-TYPE
SYNTAX  INTEGER {
                 other (1),
                 none (2),
                 photocellGap (3),
                 negativeSlope (4),
                 tooManyLevels (5),
                 invalidData (6) }
ACCESS  read-only
STATUS  mandatory
DESCRIPTION 
"<Definition> Indicates the error encountered when the brightness table was SET.
other(1) - is for a manufacturer specific indication when none of the 
     other possible values can be used. 
none(2)  - indicates that no error was encountered. 
photocellGap(3) - indicates that certain photocell levels do not have 
     an associated brightness level. 
negativeSlope(4) - indicates that the photocell range used to select a 
     brighter brightness level is lower or overlaps the photocell range 
     used to select a dimmer brightness level. Note that some signs 
     may allow a negative slope for special conditions without 
     generating an error; e.g., external illumination for a reflective sign 
     may be allowed to turn off during daylight conditions rather than 
     getting brighter.
tooManyLevels(5) - indicates that more brightness levels are defined 
     than are reported by dmsIllumNumBrightLevels. 
invalidData(6) - indicates a manufacturer defined condition of invalid 
     data not described by the other options.

<Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8"
::= { illum 8 }

dmsIllumBrightnessValuesError · mandatory

dmsIllumBrightnessValuesError OBJECT-TYPE
SYNTAX INTEGER {
                   other (1),
                   none (2),
                   photocellGap (3),
                   negativeSlope (4),
                   tooManyLevels (5),
                   invalidData (6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"<Definition> Indicates the error encountered when the brightness table was
SET.
other(1) - is for a manufacturer specific indication when none of the
      other possible values can be used.
none(2) - indicates that no error was encountered.
photocellGap(3) - indicates that certain photocell levels do not have
      an associated brightness level.
negativeSlope(4) - indicates that the photocell range used to select a
      brighter brightness level is lower or overlaps the photocell range
      used to select a dimmer brightness level. Note that some signs
      may allow a negative slope for special conditions without
      generating an error; e.g., external illumination for a reflective sign
      may be allowed to turn off during daylight conditions rather than
      getting brighter.
tooManyLevels(5) - indicates that more brightness levels are defined
      than are reported by dmsIllumNumBrightLevels.
invalidData(6) - indicates a manufacturer defined condition of invalid
      data not described by the other options.

<Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8"
::= { illum 8 }

dmsIllumBrightnessValuesError · unconfirmed

dmsIllumBrightnessValuesError  OBJECT-TYPE 
SYNTAX      INTEGER {
                 other (1),
                 none (2),
                 photocellGap (3),
                 negativeSlope (4),
                 tooManyLevels (5),
                 invalidData (6) } 
MAX-ACCESS  read-only 
STATUS      current  
DESCRIPTION  
"<Definition> Indicates the error encountered when the brightness table was 
SET.
<Format>
other(1) - is for a manufacturer specific indication when none of the 
     other possible values can be used. 
none(2)  - indicates that no error was encountered. 
photocellGap(3) - indicates that certain photocell levels do not have 
     an associated brightness level. 
negativeSlope(4) - indicates that the photocell range used to select a 
     brighter brightness level is lower or overlaps the photocell range 
     used to select a dimmer brightness level. Note that some signs 
     may allow a negative slope for special conditions without 
     generating an error; e.g., external illumination for a reflective sign 
     may be allowed to turn off during daylight conditions rather than 
     getting brighter.
tooManyLevels(5) - indicates that more brightness levels are defined 
     than are reported by dmsIllumNumBrightLevels. 
invalidData(6) - indicates a manufacturer defined condition of invalid 
     data not described by the other options.

<Parameter Type> Status
<Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8"
::= { illum 8 }

dmsIllumBrightnessValuesError · mandatory

dmsIllumBrightnessValuesError OBJECT-TYPE
SYNTAX INTEGER {
                     other (1),
                     none (2),
                     photocellGap (3),



                                                                                        

Page 185                                                           NTCIP 1203 v02.35


                 negativeSlope (4),
                 tooManyLevels (5),
                 invalidData (6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"<Definition> Indicates the error encountered when the brightness table was
SET.
other(1) - is for a manufacturer specific indication when none of the
     other possible values can be used.
none(2) - indicates that no error was encountered.
photocellGap(3) - indicates that certain photocell levels do not have
     an associated brightness level.
negativeSlope(4) - indicates that the photocell range used to select a
     brighter brightness level is lower or overlaps the photocell range
     used to select a dimmer brightness level. Note that some signs
     may allow a negative slope for special conditions without
     generating an error; e.g., external illumination for a reflective sign
     may be allowed to turn off during daylight conditions rather than
     getting brighter.
tooManyLevels(5) - indicates that more brightness levels are defined
     than are reported by dmsIllumNumBrightLevels.
invalidData(6) - indicates a manufacturer defined condition of invalid
     data not described by the other options.

<Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8"
::= { illum 8 }

Meaning

Descriptions

3 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Indicates the error encountered when the brightness table was SET.

Sources for this description

NTCIP published standard MIB annexes (reviewed modules)

See 1 matching source record

Description 2

<Definition> Indicates the error encountered when the brightness table was SET. other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8

Sources for this description

ITE public NTCIP working repository MIBsNTCIP published standard MIB annexes (reviewed modules)

See 2 matching source records

Description 3

<Definition> Indicates the error encountered when the brightness table was SET. <Format> other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Parameter Type> Status <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8

Sources for this description

ITE public NTCIP working repository MIBs

See 1 matching source record

Evidence

Source records

4 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1NTCIP published standard MIB annexes (reviewed modules)1 record · 1 source

Description 1

dmsIllumBrightnessValuesError · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: dmsIllumBrightnessValuesError

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dmsIllumBrightnessValuesError",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "none",
    "(",
    "2",
    ")",
    ",",
    "photocellGap",
    "(",
    "3",
    ")",
    ",",
    "negativeSlope",
    "(",
    "4",
    ")",
    ",",
    "tooManyLevels",
    "(",
    "5",
    ")",
    ",",
    "invalidData",
    "(",
    "6",
    ")",
    "}",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "“",
    "Indicates",
    "the",
    "error",
    "encountered",
    "when",
    "the",
    "brightness",
    "table",
    "was",
    "SET",
    ".",
    "”",
    "::=",
    "{",
    "illum",
    "8",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "none",
            2
          ],
          [
            "photocellGap",
            3
          ],
          [
            "negativeSlope",
            4
          ],
          [
            "tooManyLevels",
            5
          ],
          [
            "invalidData",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Indicates the error encountered when the brightness table was SET."
    ],
    null,
    null,
    null,
    null
  ]
}

NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1203:1997, Object Definitions for Dynamic Message Signs (DMS) Published December 1999 (superceded by NTCIP 1203 v02) — original PDF · Official record
Module: DMS-MIB

See published definition above
Module imports
```
{'TMIB': ['OwnerString', 'devices'], 'NEMA_SMI': ['experimental'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1213-MIB': ['DisplayString']}
```
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: A typographic closing DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: A typographic opening DESCRIPTION quotation delimiter occurs immediately at a native SMI field boundary. Normalize this delimiter only in the derived transcription; retain the literal published definition, full description and unchanged numeric assignments.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: TMIB. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
Source data warning: Unconfirmed interpretation of a historical NTCIP import: NTCIP 1203:1997 imports experimental from NEMA_SMI, but the retained original NEMA_SMI defines nemaExperimental instead. Section 2.10 explicitly locates these auxiliary I/O objects under the nema-experimental node. Here only that imported spelling is interpreted as the explicitly assigned nemaExperimental value. The original exp-global suffix 1 and all child numbers are retained. The later NTCIP 1201 v03 compatibility discussion also compares the old experimental spelling with nemaExperimental, but prints expGlobal suffix 2; that disagreement is not silently corrected or treated as proof that both historical branches are registered. These entries may be inaccurate; verify the linked original editions and your device. Native SMI STATUS is preserved separately.
Related ASN.1 definitions
```
nema                     OBJECT IDENTIFIER ::= { enterprises 1206 }
```
```
nemaExperimental         OBJECT IDENTIFIER ::= { nema 2 }
```
· Download NTCIP1203v0115a.pdf — DMS-MIB (MIB transcription)
Related source files and packages:
Show more related files and packages

Records for description 2ITE public NTCIP working repository MIBs, NTCIP published standard MIB annexes (reviewed modules)2 records · 3 sources

Description 2

dmsIllumBrightnessValuesError · mandatoryITE public NTCIP working repository MIBs, NTCIP published standard MIB annexes (reviewed modules)2 sources

Status in source: mandatory.

Names: dmsIllumBrightnessValuesError

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dmsIllumBrightnessValuesError",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "none",
    "(",
    "2",
    ")",
    ",",
    "photocellGap",
    "(",
    "3",
    ")",
    ",",
    "negativeSlope",
    "(",
    "4",
    ")",
    ",",
    "tooManyLevels",
    "(",
    "5",
    ")",
    ",",
    "invalidData",
    "(",
    "6",
    ")",
    "}",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Indicates the error encountered when the brightness table was SET. other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8\"",
    "::=",
    "{",
    "illum",
    "8",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "none",
            2
          ],
          [
            "photocellGap",
            3
          ],
          [
            "negativeSlope",
            4
          ],
          [
            "tooManyLevels",
            5
          ],
          [
            "invalidData",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the error encountered when the brightness table was SET. other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8"
    ],
    null,
    null,
    null,
    null
  ]
}

ITE public NTCIP working repository MIBs · Publisher's source file: NTCIP_1203 — v03/1203v03A-06g.mib
Module: NTCIP1203-v0305

See published definition above
Module imports
```
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004v02': ['OwnerString', 'dms']}
```
Source data warning: This original is published in an ITE NTCIP working repository. Repository publication does not establish that this particular revision is an adopted standard. Consult its native revision history and the NTCIP published standards catalog before implementation. Copyright and distribution notices are retained in the downloadable original.
Source data warning: Potentially inaccurate interpretation of historical NTCIP imports: the original references NTCIP8004v02, which is absent from the public repository snapshot. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP_1203 — v03/1203v03A-06g.mib
NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1203 v03, Object Definitions for Dynamic Message Signs (DMS) Published September 2014 — original PDF · Official record
Module: NTCIP1203-v03-05

See published definition above
Module imports
```
{'RFC-1212': ['OBJECT-TYPE'], 'NTCIP8004': ['OwnerString', 'dms'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1213-MIB': ['DisplayString']}
```
Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: The PDF prints an invalid ASN.1 module label (NTCIP1203 v03.05). The derived transcription uses an equal-length internal parsing label; this is not an OID registration or an alteration of any numeric assignment. The original label and full PDF are retained.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1203v03f.pdf — NTCIP1203-v03-05 (MIB transcription)
Related source files and packages:
- NTCIP 1203 v03, Object Definitions for Dynamic Message Signs (DMS) Published September 2014 — original PDF

dmsIllumBrightnessValuesError · mandatoryNTCIP published standard MIB annexes (reviewed modules)1 source

Status in source: mandatory.

Names: dmsIllumBrightnessValuesError

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dmsIllumBrightnessValuesError",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "none",
    "(",
    "2",
    ")",
    ",",
    "photocellGap",
    "(",
    "3",
    ")",
    ",",
    "Page",
    "185",
    "NTCIP",
    "1203",
    "v02",
    ".",
    "35",
    "negativeSlope",
    "(",
    "4",
    ")",
    ",",
    "tooManyLevels",
    "(",
    "5",
    ")",
    ",",
    "invalidData",
    "(",
    "6",
    ")",
    "}",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"<Definition> Indicates the error encountered when the brightness table was SET. other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8\"",
    "::=",
    "{",
    "illum",
    "8",
    "}"
  ]
}

NTCIP published standard MIB annexes (reviewed modules) · Publisher's source file: NTCIP 1203 v02, Object Definitins for Dynamic Message Signs (DMS) – Version 02 Published March 2007 (superceded by NTCIP 1203 v03) — original PDF · Official record
Module: NTCIP1203-2005

See published definition above
Module imports
```
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter'], 'RFC1213-MIB': ['DisplayString'], 'NTCIP8004-A-2004': ['OwnerString', 'dms']}
```
Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations. The declaration also has invalid SMI syntax; its type constraints were not validated.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004-A-2004. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP1203v02-35a.pdf — NTCIP1203-2005 (MIB transcription)
Related source files and packages:
- NTCIP 1203 v02, Object Definitins for Dynamic Message Signs (DMS) – Version 02 Published March 2007 (superceded by NTCIP 1203 v03) — original PDF

Records for description 3ITE public NTCIP working repository MIBs1 record · 1 source

Description 3

dmsIllumBrightnessValuesError · unconfirmedITE public NTCIP working repository MIBs1 source

Status in source: unconfirmed.

Names: dmsIllumBrightnessValuesError

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dmsIllumBrightnessValuesError",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "none",
    "(",
    "2",
    ")",
    ",",
    "photocellGap",
    "(",
    "3",
    ")",
    ",",
    "negativeSlope",
    "(",
    "4",
    ")",
    ",",
    "tooManyLevels",
    "(",
    "5",
    ")",
    ",",
    "invalidData",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"<Definition> Indicates the error encountered when the brightness table was SET. <Format> other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Parameter Type> Status <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8\"",
    "::=",
    "{",
    "illum",
    "8",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "none",
            2
          ],
          [
            "photocellGap",
            3
          ],
          [
            "negativeSlope",
            4
          ],
          [
            "tooManyLevels",
            5
          ],
          [
            "invalidData",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "<Definition> Indicates the error encountered when the brightness table was SET. <Format> other(1) - is for a manufacturer specific indication when none of the other possible values can be used. none(2) - indicates that no error was encountered. photocellGap(3) - indicates that certain photocell levels do not have an associated brightness level. negativeSlope(4) - indicates that the photocell range used to select a brighter brightness level is lower or overlaps the photocell range used to select a dimmer brightness level. Note that some signs may allow a negative slope for special conditions without generating an error; e.g., external illumination for a reflective sign may be allowed to turn off during daylight conditions rather than getting brighter. tooManyLevels(5) - indicates that more brightness levels are defined than are reported by dmsIllumNumBrightLevels. invalidData(6) - indicates a manufacturer defined condition of invalid data not described by the other options. <Parameter Type> Status <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.7.8"
    ],
    null,
    null,
    null,
    null
  ]
}

ITE public NTCIP working repository MIBs · Publisher's source file: NTCIP-1203 — NTCIP1203-Dms.mib
Module: NTCIP1203-Dms

See published definition above
Module imports
```
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'StorageType', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'ISO26048-1-Srsa': ['fdSrsaTypeCode', 'fdSrsaPortIndex'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'ISO26048-1-Global-TC': ['ITSDirection', 'ITSInteger8', 'ITSLatitude84', 'ITSLongitude84', 'ITSBitmap'], 'TRANSPORT-ADDRESS-MIB': ['TransportAddressType', 'TransportAddress'], 'NTCIP8004-Transportation': ['NtcipOwnerString', 'NtcipIntegerBitmap8', 'NtcipIntegerBitmap16', 'NtcipTwoColors', 'devices']}
```
Source data warning: This original is published in an ITE NTCIP working repository. Repository publication does not establish that this particular revision is an adopted standard. Consult its native revision history and the NTCIP published standards catalog before implementation. Copyright and distribution notices are retained in the downloadable original.
Source data warning: Published module-root disagreement: dms has an SMI assignment resolving to 1.3.6.1.4.1.1206.4.2.6, while its DESCRIPTION explicitly prints 1.3.6.1.4.1.1206.4.2.3. All dependent assignments from this module require verification. No root number has been silently corrected.
Source data warning: Published source disagreement: this literal SMI assignment resolves to 1.3.6.1.4.1.1206.4.2.6.7.8, but its DESCRIPTION explicitly lists 1.3.6.1.4.1.1206.4.2.3.7.8. Both published numeric claims are retained as unconfirmed evidence. Neither value is presented as a verified correction or an independently confirmed registration; consult the original file and the applicable standard edition.
· Download NTCIP-1203 — NTCIP1203-Dms.mib

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.1206)

Schopp Bruce J.

Siblings (8)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.1206.4.2.3.7.1	dmsIllumControl	0	0
1.3.6.1.4.1.1206.4.2.3.7.2	dmsIllumMaxPhotocellLevel	0	0
1.3.6.1.4.1.1206.4.2.3.7.3	dmsIllumPhotocellLevelStatus	0	0
1.3.6.1.4.1.1206.4.2.3.7.4	dmsIllumNumBrightLevels	0	0
1.3.6.1.4.1.1206.4.2.3.7.5	dmsIllumBrightLevelStatus	0	0
1.3.6.1.4.1.1206.4.2.3.7.6	dmsIllumManLevel	0	0
1.3.6.1.4.1.1206.4.2.3.7.7	dmsIllumBrightnessValues	0	0
1.3.6.1.4.1.1206.4.2.3.7.9	dmsIllumLightOutputStatus	0	0