Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sensorSystemReset",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"restart",
"(",
"1",
")",
",",
"reinitializeUserSettings",
"(",
"2",
")",
",",
"restoreFactoryDefaults",
"(",
"3",
")",
",",
"retune",
"(",
"4",
")",
",",
"resyncSamplingPeriods",
"(",
"5",
")",
",",
"shortDiagnostics",
"(",
"6",
")",
",",
"fullDiagnostics",
"(",
"7",
")",
",",
"executePendingConfiguration",
"(",
"8",
")",
",",
"abortPendingConfiguration",
"(",
"9",
")",
",",
"validatePendingConfiguration",
"(",
"10",
")",
",",
"noResetInProgress",
"(",
"11",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> A software interface to initiate a reset of various functions of the TSS. Execution of the command shall set this object to the value 0. The reset commands are described as follows: restart(1) - This command shall cause the unit to enter restart state and go through a complete shut-down and start-up process, causing a reset and initialization of the number of seconds since most recent TSS initialization to a value of zero. reinitializeUserSettings(2) ? This command shall cause the unit to flush all memory and reinitialize all settings to their user-defined default values, and reset and initialize the number of seconds since most recent TSS initialization to a value of zero. restoreFactoryDefaults(3) - This command shall cause the unit to flush all memory, restore all settings to their factory default values, and reset and initialize the number of seconds since most recent TSS initialization to a value of zero. retune(4) ? This command recalibrates unit background settings for all zones without resetting or flushing of any collected data. resyncSamplingPeriods(5) ? This command shall cause the unit to synchronize all startup sampling period clocks within one (1) second of receiving the command and a reset and initialize of the number of seconds since most recent TSS initialization to a value of zero. shortDiagnostics(6) ? This command shall cause the unit to go through an abbreviated vendor-specific diagnostic routine which may be the same as full diagnostics for some vendors. fullDiagnostics(7) ? This command shall cause the unit to go through a complete vendor-specific diagnostic routine which may be the same as short diagnostics for some vendors, causing a reset and initialization of the number of seconds since most recent TSS initialization to a value of zero. executePendingConfiguration(8) ? The behavior of this command is dependent upon type of configuration file uploaded and is manufacturer- specific. Execution may result in a system reboot, reinitialization, and loss of historical data. abortPendingConfiguration(9) ? This command shall cause the TSS to cancel the currently pending configuration changes. validatePendingConfiguration(10) ? This command is used to check the configuration to ensure that it is a valid configuration file. noResetInProgress(11) ? No command is in-progress. All other commands shall set this object to this state upon completion. This value is read-only. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.1.1\"",
"::=",
"{",
"tssSystemSetup",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"restart",
1
],
[
"reinitializeUserSettings",
2
],
[
"restoreFactoryDefaults",
3
],
[
"retune",
4
],
[
"resyncSamplingPeriods",
5
],
[
"shortDiagnostics",
6
],
[
"fullDiagnostics",
7
],
[
"executePendingConfiguration",
8
],
[
"abortPendingConfiguration",
9
],
[
"validatePendingConfiguration",
10
],
[
"noResetInProgress",
11
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> A software interface to initiate a reset of various functions of the TSS. Execution of the command shall set this object to the value 0. The reset commands are described as follows: restart(1) - This command shall cause the unit to enter restart state and go through a complete shut-down and start-up process, causing a reset and initialization of the number of seconds since most recent TSS initialization to a value of zero. reinitializeUserSettings(2) ? This command shall cause the unit to flush all memory and reinitialize all settings to their user-defined default values, and reset and initialize the number of seconds since most recent TSS initialization to a value of zero. restoreFactoryDefaults(3) - This command shall cause the unit to flush all memory, restore all settings to their factory default values, and reset and initialize the number of seconds since most recent TSS initialization to a value of zero. retune(4) ? This command recalibrates unit background settings for all zones without resetting or flushing of any collected data. resyncSamplingPeriods(5) ? This command shall cause the unit to synchronize all startup sampling period clocks within one (1) second of receiving the command and a reset and initialize of the number of seconds since most recent TSS initialization to a value of zero. shortDiagnostics(6) ? This command shall cause the unit to go through an abbreviated vendor-specific diagnostic routine which may be the same as full diagnostics for some vendors. fullDiagnostics(7) ? This command shall cause the unit to go through a complete vendor-specific diagnostic routine which may be the same as short diagnostics for some vendors, causing a reset and initialization of the number of seconds since most recent TSS initialization to a value of zero. executePendingConfiguration(8) ? The behavior of this command is dependent upon type of configuration file uploaded and is manufacturer- specific. Execution may result in a system reboot, reinitialization, and loss of historical data. abortPendingConfiguration(9) ? This command shall cause the TSS to cancel the currently pending configuration changes. validatePendingConfiguration(10) ? This command is used to check the configuration to ensure that it is a valid configuration file. noResetInProgress(11) ? No command is in-progress. All other commands shall set this object to this state upon completion. This value is read-only. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.1.1"
],
null,
null,
null,
null
]
}