Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"zoneSensitivity",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"(",
"SIZE",
"(",
"2",
")",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> This bit-mapped object allows the setting and reading of the sensitivity for the zone as follows: <Format> bit 3,bit 2,bit1,bit 0 Meaning 0000 Zone OFF (Disabled) (LSB) 0001 Detect ?L = 512 nanoHenries or ?L/L = 0.64% 0010 Detect ?L = 256 nanoHhenries or ?L/L = 0.32% 0011 Detect ?L = 128 nanoHenries or ?L/L = 0.16% 0100 Detect ?L = 64 nanoHenries or ?L/L = 0.08% 0101 Detect ?L = 32 nanoHenries or ?L/L = 0.04% 0110 Detect ?L = 16 nanoHenries or ?L/L = 0.02% 0111 Detect ?L = 8 nanoHenries or ?L/L = 0.01% or, if bit 15=1 Detect ?L = 0 to 32,767 nanoHenries or ?L/L = 0 to 32.767% (MSB) These sensitivity definitions are equal with a loop inductance of 80 microHenries. A detector need not support all of these settings. However, the sensitivities it does support are required to conform with these definitions, e.g. a sensitivity setting of 3 is always 128 nanoHenries or 0.16% with an 80 microhenry loop. If bit 15=1, bit 0 ? bit 14 contain the sensitivity in nanoHenries or one-thousands of a percent, e.g. 3650 is 3.650%. A value of 65535 shall be returned to represent invalid data or not a physical zone. Values of 8 through 32767 are reserved. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.4.1.1.2\"",
"::=",
"{",
"loopSensorSetupEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING",
[
"octetStringSubType",
[
[
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> This bit-mapped object allows the setting and reading of the sensitivity for the zone as follows: <Format> bit 3,bit 2,bit1,bit 0 Meaning 0000 Zone OFF (Disabled) (LSB) 0001 Detect ?L = 512 nanoHenries or ?L/L = 0.64% 0010 Detect ?L = 256 nanoHhenries or ?L/L = 0.32% 0011 Detect ?L = 128 nanoHenries or ?L/L = 0.16% 0100 Detect ?L = 64 nanoHenries or ?L/L = 0.08% 0101 Detect ?L = 32 nanoHenries or ?L/L = 0.04% 0110 Detect ?L = 16 nanoHenries or ?L/L = 0.02% 0111 Detect ?L = 8 nanoHenries or ?L/L = 0.01% or, if bit 15=1 Detect ?L = 0 to 32,767 nanoHenries or ?L/L = 0 to 32.767% (MSB) These sensitivity definitions are equal with a loop inductance of 80 microHenries. A detector need not support all of these settings. However, the sensitivities it does support are required to conform with these definitions, e.g. a sensitivity setting of 3 is always 128 nanoHenries or 0.16% with an 80 microhenry loop. If bit 15=1, bit 0 ? bit 14 contain the sensitivity in nanoHenries or one-thousands of a percent, e.g. 3650 is 3.650%. A value of 65535 shall be returned to represent invalid data or not a physical zone. Values of 8 through 32767 are reserved. <Object Identifier> 1.3.6.1.4.1.1206.4.2.4.4.1.1.2"
],
null,
null,
null,
null
]
}