shortErrorStatus

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "shortErrorStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "NtcipIntegerBitmap16",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"<Definition> A bitmap of summary errors. When a bit is set, the error is presently active. When a bit is clear the error is not currently active. If no sensor is present or supported (for a corresponding bit), the bit shall not be set. <Format> The bits are defined as follows: Bit 0- other - not defined by this standard, see the value of dmsOtherShortErrorDescr. The value of other was deprecated in v02 and reinstated in v04. Bit 1- communications error - this bit shall be set if any error associated with the communications between the central computer and the device occurs. Bit 2- power error - this bit shall be set if any error is detected for any power supply associated with any component (i.e., any bit set in fdSrsaTypeWarning.FPA, FPS, or FPV) or if the generator fuel level is below its minimum threshold or has an error (i.e., any bit set in fdSrsaTypeWarning.FGF). Bit 3- attached device error - this bit shall be set if any error associated with attached (supported, and enabled) external devices occurs (i.e., any bit set in any fdSrsaTypeWarning object that is not otherwise specified by other bots of this object). Bit 4- lamp error - this bit shall be set if any errors associated with any lamp occurs (i.e., any bit set in fdSrsaTypeWarning.MLS) This bit is only applicable to devices that support lamps such as fiber optic signs or front-illuminated reflective signs. This bit is not applicable to lamps or fluorescent lights illuminating the housing or cabinet. Bit 5- pixel error - this bit shall be set if any errors associated with any pixel occurs (see the objects pixelFailureTableNumRows for NTCIP 1203 v01 deployments, and pixelFailureTableNumRows, and/or dmsPixelFailureTestRows and dmsPixelFailureMessageRows for NTCIP 1203 v02 deployments.). This bit is only applicable to devices that support illumination of individual pixels, but not to drum signs. Note that certain sign technologies such as flip disk only sign may not be able to determine pixel errors. Bit 6- photocell error - this bit shall be set if any errors associated with the supported light sensors occurs (i.e., any bit set in fdSrsaTypeWarning.FAL). Bit 7- message error - this bit shall be set if any errors associated with activating and/or displaying a message occurs (see the object dmsActivateMsgError). Bit 8- controller error - this bit shall be set if any errors associated with the controller occurs (i.e., any bit set in fdControllerStatus). Bit 9- temperature warning - this bit shall be set if any of the temperature values detected by the device exceed non-standardized temperature values (i.e., any bit set in fdSrsaTypeWarning.FAT FET, or FPT). This bit is included to allow vendors or agencies to define vendor- or agency-specific threshold objects that indicate temperature changes that are of interest but not dangerous to the life-expectancy of the device (see also the 'critical temperature' bit) Bit 10- climate-control system error - this bit shall be set if any errors associated with the climate control systems such as fans and/or heaters occurs (i.e., any bit set in fdSrsaTypeWarning.FAC, FDC, FFO, FHO, or FTT). Bit 11- critical temperature error - this bit shall be set if the critical temperature as defined by the value of the critical temperature objects have been exceeded (i.e., any bit set in fdSrsaTypeStatus.FAT, FET, or FPT). Bit 12- Drum-sign Rotor error - This bit shall be set if any errors associated with the rotor of a drum sign occurs (i.e., any bit set in fdSrsaTypeWarning.MDS). Bit 13- This bit shall be set if any door to any DMS field component (cabinet or housing) is open (i.e., any bit set in fdSrsaTypeWarning.FDO). Bit 14- Humidity warning - This bit shall be set if any humidity sensor sensor is reporting a humidity warning (i.e., any bit set in fdSrsaTypeWarning.FAH or FEH). Bit 15- invisible default text - this bit shall be set if the value for defaultBackgroudRGB is equal to the value of defaultForegroundRGB, which would result in the message not being visible unless the MULTI string itself specifies alternate colors. <Informative> To track a history of transient error conditions utilize the event logging table located in the Global Objects Definitions (NTCIP 1201). <Parameter Type> Status <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.1\"",
    "::=",
    "{",
    "statError",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "NtcipIntegerBitmap16"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "<Definition> A bitmap of summary errors. When a bit is set, the error is presently active. When a bit is clear the error is not currently active. If no sensor is present or supported (for a corresponding bit), the bit shall not be set. <Format> The bits are defined as follows: Bit 0- other - not defined by this standard, see the value of dmsOtherShortErrorDescr. The value of other was deprecated in v02 and reinstated in v04. Bit 1- communications error - this bit shall be set if any error associated with the communications between the central computer and the device occurs. Bit 2- power error - this bit shall be set if any error is detected for any power supply associated with any component (i.e., any bit set in fdSrsaTypeWarning.FPA, FPS, or FPV) or if the generator fuel level is below its minimum threshold or has an error (i.e., any bit set in fdSrsaTypeWarning.FGF). Bit 3- attached device error - this bit shall be set if any error associated with attached (supported, and enabled) external devices occurs (i.e., any bit set in any fdSrsaTypeWarning object that is not otherwise specified by other bots of this object). Bit 4- lamp error - this bit shall be set if any errors associated with any lamp occurs (i.e., any bit set in fdSrsaTypeWarning.MLS) This bit is only applicable to devices that support lamps such as fiber optic signs or front-illuminated reflective signs. This bit is not applicable to lamps or fluorescent lights illuminating the housing or cabinet. Bit 5- pixel error - this bit shall be set if any errors associated with any pixel occurs (see the objects pixelFailureTableNumRows for NTCIP 1203 v01 deployments, and pixelFailureTableNumRows, and/or dmsPixelFailureTestRows and dmsPixelFailureMessageRows for NTCIP 1203 v02 deployments.). This bit is only applicable to devices that support illumination of individual pixels, but not to drum signs. Note that certain sign technologies such as flip disk only sign may not be able to determine pixel errors. Bit 6- photocell error - this bit shall be set if any errors associated with the supported light sensors occurs (i.e., any bit set in fdSrsaTypeWarning.FAL). Bit 7- message error - this bit shall be set if any errors associated with activating and/or displaying a message occurs (see the object dmsActivateMsgError). Bit 8- controller error - this bit shall be set if any errors associated with the controller occurs (i.e., any bit set in fdControllerStatus). Bit 9- temperature warning - this bit shall be set if any of the temperature values detected by the device exceed non-standardized temperature values (i.e., any bit set in fdSrsaTypeWarning.FAT FET, or FPT). This bit is included to allow vendors or agencies to define vendor- or agency-specific threshold objects that indicate temperature changes that are of interest but not dangerous to the life-expectancy of the device (see also the 'critical temperature' bit) Bit 10- climate-control system error - this bit shall be set if any errors associated with the climate control systems such as fans and/or heaters occurs (i.e., any bit set in fdSrsaTypeWarning.FAC, FDC, FFO, FHO, or FTT). Bit 11- critical temperature error - this bit shall be set if the critical temperature as defined by the value of the critical temperature objects have been exceeded (i.e., any bit set in fdSrsaTypeStatus.FAT, FET, or FPT). Bit 12- Drum-sign Rotor error - This bit shall be set if any errors associated with the rotor of a drum sign occurs (i.e., any bit set in fdSrsaTypeWarning.MDS). Bit 13- This bit shall be set if any door to any DMS field component (cabinet or housing) is open (i.e., any bit set in fdSrsaTypeWarning.FDO). Bit 14- Humidity warning - This bit shall be set if any humidity sensor sensor is reporting a humidity warning (i.e., any bit set in fdSrsaTypeWarning.FAH or FEH). Bit 15- invisible default text - this bit shall be set if the value for defaultBackgroudRGB is equal to the value of defaultForegroundRGB, which would result in the message not being visible unless the MULTI string itself specifies alternate colors. <Informative> To track a history of transient error conditions utilize the event logging table located in the Global Objects Definitions (NTCIP 1201). <Parameter Type> Status <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.1"
    ],
    null,
    null,
    null,
    null
  ]
}