<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. <Format> other: the meaning of this value is not defined in this document; this value was deprecated in NTCIP 1203 v02. noTest: Receiving this value in response to a GetRequest indicates that the sign is not currently undergoing a pixel test. The value 'noTest' is not valid in a SetRequest. test: Setting the value to 'test' clears both the pixel failure table and the pixelFailureTableNumRows object (for both 'messageDisplay' and 'pixelTest' types) and starts the pixel test, meaning this test is executed once. Pixel failures identified by this test are entered into the pixelFailureTable with pixelFailureDetectionType equal to 'pixelTest'. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still undergoing a previous test. clearTable: Setting the value to 'clearTable' clears both the pixel failure table and the pixelFailureTableNumRows object for both 'messageDisplay' and 'pixelTest' types. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still clearing the table from a previous command. <Informative> Versions of this object prior to NTCIP 1203 v04 were ambiguous regarding (1) the device transitioning the value 'clearTable' to 'noTest' once the table was cleared, (2) the possibility of using the 'noTest' value in a SetRequest, and (3) the meaning of a 'clearTable' value in a response to a GetRequest. In v02, the enumerated value of 'other' is RETIRED to improve interoperability. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4
OID reference
pixelTestActivation
1.3.6.1.4.1.1206.4.2.6.9.7.4
Description
<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. <Format> other: the meaning of this value is not defined in this document; this value was deprecated in NTCIP 1203 v02…
Identification
Identifier and names
- Parent
- 1.3.6.1.4.1.1206.4.2.6.9.7 (statError)
- Node code
- 4
- Node name
- pixelTestActivation
- Category
- SNMP management object
- Numeric OID
- 1.3.6.1.4.1.1206.4.2.6.9.7.4
- URN notation
- urn:oid:1.3.6.1.4.1.1206.4.2.6.9.7.4
ASN.1, OID-IRI and named path variants
- ASN.1 notation
-
{1 3 6 1 4 1 1206 4 2 6 9 7 4}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) global(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) global(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) dms(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nema(1206) transportation(4) devices(2) dms(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) global(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) global(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) dms(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nema(1206) transportation(4) devices(2) dms(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) global(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) global(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) dms(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nema(1206) transportation(4) devices(2) dms(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) global(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) global(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) dms(6) globalV2(9) statError(7) pixelTestActivation(4)}
- {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nema(1206) transportation(4) devices(2) dms(6) dmsStatus(9) statError(7) pixelTestActivation(4)}
- Additional combinations skipped.
- OID-IRI notation
- /1/3/6/1/4/1/1206/4/2/6/9/7/4
- /ISO/Identified-Organization/6/1/4/1/1206/4/2/6/9/7/4
- /ISO/3/6/1/4/1/1206/4/2/6/9/7/4
- Named path variants
- /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/global/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/global/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/dms/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/1206/transportation/devices/dms/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/global/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/global/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/dms/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprise/nema/transportation/devices/dms/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/global/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/global/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/dms/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/1206/transportation/devices/dms/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/global/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/global/dmsStatus/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/dms/globalV2/statError/pixelTestActivation
- /iso/identified-organization/dod/internet/private/enterprises/nema/transportation/devices/dms/dmsStatus/statError/pixelTestActivation
- Additional combinations skipped.
SNMP properties
- Value type
- INTEGER
- Maximum access defined by MIB
- read-write
- Status in MIB
- current
- Default value
- noTest
Enumerated values
Notes below names come from selected MIB definitions.
| Value | Name and source notes |
|---|---|
| 1 | other deprecated |
| 2 | noTest |
| 3 | test |
| 4 | clearTable |
Using this OID with SNMP
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.6.9.7.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Published definition
The displayed source records contain one distinct definition. Compare its source records.
pixelTestActivation OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- deprecated
noTest (2),
test (3),
clearTable (4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"<Definition> Indicates the state of the pixel testing. The actual test
routine can vary among different manufacturers. The results of the pixel
failure test shall be stored in the pixel failure table.
<Format>
other: the meaning of this value is not defined in this document; this
value was deprecated in NTCIP 1203 v02.
noTest: Receiving this value in response to a GetRequest indicates that
the sign is not currently undergoing a pixel test. The value 'noTest' is
not valid in a SetRequest.
test: Setting the value to 'test' clears both the pixel failure table and
the pixelFailureTableNumRows object (for both 'messageDisplay' and
'pixelTest' types) and starts the pixel test, meaning this test is
executed once. Pixel failures identified by this test are entered into
the pixelFailureTable with pixelFailureDetectionType equal to
'pixelTest'. The sign controller automatically sets the value of this
object back to 'noTest' after completion. Receiving this value in
response to a GetRequest indicates that the sign is still undergoing a
previous test.
clearTable: Setting the value to 'clearTable' clears both the pixel failure
table and the pixelFailureTableNumRows object for both 'messageDisplay'
and 'pixelTest' types. The sign controller automatically sets the value
of this object back to 'noTest' after completion. Receiving this value in
response to a GetRequest indicates that the sign is still clearing the
table from a previous command.
<Informative> Versions of this object prior to NTCIP 1203 v04 were ambiguous
regarding (1) the device transitioning the value 'clearTable' to 'noTest'
once the table was cleared, (2) the possibility of using the 'noTest' value
in a SetRequest, and (3) the meaning of a 'clearTable' value in a response to
a GetRequest.
In v02, the enumerated value of 'other' is RETIRED to improve
interoperability.
<Parameter Type> Control
<Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4"
DEFVAL {noTest}
::= { statError 4 }
Meaning
Descriptions
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Evidence
Source records
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Records for description 1ITE public NTCIP working repository MIBs
pixelTestActivation · unconfirmedITE public NTCIP working repository MIBs
Status in source: unconfirmed.
Names: pixelTestActivation
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pixelTestActivation",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"noTest",
"(",
"2",
")",
",",
"test",
"(",
"3",
")",
",",
"clearTable",
"(",
"4",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. <Format> other: the meaning of this value is not defined in this document; this value was deprecated in NTCIP 1203 v02. noTest: Receiving this value in response to a GetRequest indicates that the sign is not currently undergoing a pixel test. The value 'noTest' is not valid in a SetRequest. test: Setting the value to 'test' clears both the pixel failure table and the pixelFailureTableNumRows object (for both 'messageDisplay' and 'pixelTest' types) and starts the pixel test, meaning this test is executed once. Pixel failures identified by this test are entered into the pixelFailureTable with pixelFailureDetectionType equal to 'pixelTest'. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still undergoing a previous test. clearTable: Setting the value to 'clearTable' clears both the pixel failure table and the pixelFailureTableNumRows object for both 'messageDisplay' and 'pixelTest' types. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still clearing the table from a previous command. <Informative> Versions of this object prior to NTCIP 1203 v04 were ambiguous regarding (1) the device transitioning the value 'clearTable' to 'noTest' once the table was cleared, (2) the possibility of using the 'noTest' value in a SetRequest, and (3) the meaning of a 'clearTable' value in a response to a GetRequest. In v02, the enumerated value of 'other' is RETIRED to improve interoperability. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4\"",
"DEFVAL",
"{",
"noTest",
"}",
"::=",
"{",
"statError",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"noTest",
2
],
[
"test",
3
],
[
"clearTable",
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"<Definition> Indicates the state of the pixel testing. The actual test routine can vary among different manufacturers. The results of the pixel failure test shall be stored in the pixel failure table. <Format> other: the meaning of this value is not defined in this document; this value was deprecated in NTCIP 1203 v02. noTest: Receiving this value in response to a GetRequest indicates that the sign is not currently undergoing a pixel test. The value 'noTest' is not valid in a SetRequest. test: Setting the value to 'test' clears both the pixel failure table and the pixelFailureTableNumRows object (for both 'messageDisplay' and 'pixelTest' types) and starts the pixel test, meaning this test is executed once. Pixel failures identified by this test are entered into the pixelFailureTable with pixelFailureDetectionType equal to 'pixelTest'. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still undergoing a previous test. clearTable: Setting the value to 'clearTable' clears both the pixel failure table and the pixelFailureTableNumRows object for both 'messageDisplay' and 'pixelTest' types. The sign controller automatically sets the value of this object back to 'noTest' after completion. Receiving this value in response to a GetRequest indicates that the sign is still clearing the table from a previous command. <Informative> Versions of this object prior to NTCIP 1203 v04 were ambiguous regarding (1) the device transitioning the value 'clearTable' to 'noTest' once the table was cleared, (2) the possibility of using the 'noTest' value in a SetRequest, and (3) the meaning of a 'clearTable' value in a response to a GetRequest. In v02, the enumerated value of 'other' is RETIRED to improve interoperability. <Parameter Type> Control <Object Identifier> 1.3.6.1.4.1.1206.4.2.3.9.7.4"
],
null,
null,
null,
[
"DEFVAL",
"noTest"
]
]
}- ITE public NTCIP working repository MIBs
· Publisher's source file: NTCIP-1203 — NTCIP1203-Dms.mib
Module: NTCIP1203-Dms
See published definition above
Module imports
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'StorageType', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'ISO26048-1-Srsa': ['fdSrsaTypeCode', 'fdSrsaPortIndex'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'ISO26048-1-Global-TC': ['ITSDirection', 'ITSInteger8', 'ITSLatitude84', 'ITSLongitude84', 'ITSBitmap'], 'TRANSPORT-ADDRESS-MIB': ['TransportAddressType', 'TransportAddress'], 'NTCIP8004-Transportation': ['NtcipOwnerString', 'NtcipIntegerBitmap8', 'NtcipIntegerBitmap16', 'NtcipTwoColors', 'devices']}Source data warning: This original is published in an ITE NTCIP working repository. Repository publication does not establish that this particular revision is an adopted standard. Consult its native revision history and the NTCIP published standards catalog before implementation. Copyright and distribution notices are retained in the downloadable original.
Source data warning: Published module-root disagreement: dms has an SMI assignment resolving to 1.3.6.1.4.1.1206.4.2.6, while its DESCRIPTION explicitly prints 1.3.6.1.4.1.1206.4.2.3. All dependent assignments from this module require verification. No root number has been silently corrected.
Source data warning: Published source disagreement: this literal SMI assignment resolves to 1.3.6.1.4.1.1206.4.2.6.9.7.4, but its DESCRIPTION explicitly lists 1.3.6.1.4.1.1206.4.2.3.9.7.4. Both published numeric claims are retained as unconfirmed evidence. Neither value is presented as a verified correction or an independently confirmed registration; consult the original file and the applicable standard edition.
· Download NTCIP-1203 — NTCIP1203-Dms.mib
Registration