This field specifies the status of the raid subsystem.
This is a composite of the view of the underlying subsystems.
Status ok means things are ok.
Status degraded means we are in a degraded state, possible because no spare is available.
Status verifying means a verify pass is run, and a percent complete is available.
Status reconstructing means we are reconstructing a drive and a percent complete is available.
Status failed means we had a failure while we were up, possibly a drive failed and we have
no spare.
Status catastrophicLoss may not be visible to the user since the member may not be able to
bootup. It means we need administrator intervention to correct the problem.
Parsed from file eqlmember.mib.txt
Company: equallogic
Module: EQLMEMBER-MIB
Vendor: EqualLogic
Module: EQLMEMBER-MIB (eqlmember.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
eqlMemberStatusRaidStatus OBJECT-TYPE SYNTAX INTEGER { ok (1), degraded (2), verifying (3), reconstructing (4), failed (5), catastrophicLoss(6), expanding (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This field specifies the status of the raid subsystem. This is a composite of the view of the underlying subsystems. Status ok means things are ok. Status degraded means we are in a degraded state, possible because no spare is available. Status verifying means a verify pass is run, and a percent complete is available. Status reconstructing means we are reconstructing a drive and a percent complete is available. Status failed means we had a failure while we were up, possibly a drive failed and we have no spare. Status catastrophicLoss may not be visible to the user since the member may not be able to bootup. It means we need administrator intervention to correct the problem. " ::= {eqlMemberStatusEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.2.1.3.1.1 | eqlMemberStatusTotalSpace | 0 | 0 | This field specifies the total disk space in MBs on the this array. |
| 1.3.6.1.4.1.12740.2.1.3.1.2 | eqlMemberStatusTotalSpaceUsed | 0 | 0 | This field specifies the total disk space in MBs allocated to volume data for this array. |
| 1.3.6.1.4.1.12740.2.1.3.1.3 | eqlMemberStatusModel | 0 | 0 | This field specifies the model number for the array. |
| 1.3.6.1.4.1.12740.2.1.3.1.4 | eqlMemberStatusSerialNumber | 0 | 0 | This field specifies the serial number for the array. |
| 1.3.6.1.4.1.12740.2.1.3.1.5 | eqlMemberStatusNumberOfControllers | 0 | 0 | This field specifies the number of Controller modules in the array. |
| 1.3.6.1.4.1.12740.2.1.3.1.6 | eqlMemberStatusNumberOfDisks | 0 | 0 | This field specifies the number of disk installed in the array. |
| 1.3.6.1.4.1.12740.2.1.3.1.7 | eqlMemberStatusNumberOfSpares | 0 | 0 | This field specifies the number disks allocated as spares in an array. |
| 1.3.6.1.4.1.12740.2.1.3.1.8 | eqlMemberStatusCacheSize | 0 | 0 | The field specifies the size in MB of the read/write cache within the array. |
| 1.3.6.1.4.1.12740.2.1.3.1.9 | eqlMemberStatusCacheMode | 0 | 0 | This field specifies the mode the cache is in within the array. The default is write-back. The array will be set to write-thru o… |
| 1.3.6.1.4.1.12740.2.1.3.1.11 | eqlMemberStatusNumberOfConnections | 0 | 0 | This field specifies the number of iSCSI initiators which are connected to this array. |
| 1.3.6.1.4.1.12740.2.1.3.1.12 | eqlMemberStatusAverageTemp | 0 | 0 | This field specifies the average tempature of the array in degrees C. |
| 1.3.6.1.4.1.12740.2.1.3.1.13 | eqlMemberStatusTempStatus | 0 | 0 | This field specifies whether the tempatures for the array are within acceptable tolerances. ** What are acceptable tolerances? |
| 1.3.6.1.4.1.12740.2.1.3.1.14 | eqlMemberStatusBackplaneTempSensor1 | 0 | 0 | This field specifies the tempature of backplane sensor 1 in degrees C. |
| 1.3.6.1.4.1.12740.2.1.3.1.15 | eqlMemberStatusBackplaneTempSensor2 | 0 | 0 | This field specifies the tempature of backplane sensor 2 in degrees C. |
| 1.3.6.1.4.1.12740.2.1.3.1.16 | eqlMemberStatusPowerSupply1Status | 0 | 0 | This field specifies the state of the first power supply. |
| 1.3.6.1.4.1.12740.2.1.3.1.17 | eqlMemberStatusPowerSupply2Status | 0 | 0 | This field specifies the state of the second power supply. |
| 1.3.6.1.4.1.12740.2.1.3.1.18 | eqlMemberStatusTrayOneFanOneSpeed | 0 | 0 | The field specifies the rpm fan speed for fan tray 1, fan 1. |
| 1.3.6.1.4.1.12740.2.1.3.1.19 | eqlMemberStatusTrayOneFanTwoSpeed | 0 | 0 | The field specifies the rpm fan speed for fan tray 1, fan 2. |
| 1.3.6.1.4.1.12740.2.1.3.1.20 | eqlMemberStatusTrayTwoFanOneSpeed | 0 | 0 | The field specifies the rpm fan speed for fan tray 2, fan 1. |
| 1.3.6.1.4.1.12740.2.1.3.1.21 | eqlMemberStatusTrayTwoFanTwoSpeed | 0 | 0 | The field specifies the rpm fan speed for fan tray 2, fan 2. |
| 1.3.6.1.4.1.12740.2.1.3.1.22 | eqlMemberStatusPowerSupplyOneFanStatus | 0 | 0 | This field specifies whether the fan in power supply one is on-line or not. |
| 1.3.6.1.4.1.12740.2.1.3.1.23 | eqlMemberStatusPowerSupplyTwoFanStatus | 0 | 0 | This field specifies whether the fan in power supply two is on-line or not. |
| 1.3.6.1.4.1.12740.2.1.3.1.25 | eqlMemberStatusRaidPercentage | 0 | 0 | This field specifies the percentage complete when the eqlMemberStatusRaidStatus is verifying or reconstructing. |
| 1.3.6.1.4.1.12740.2.1.3.1.26 | eqlMemberStatusLostRaidBlocks | 0 | 0 | This field specifies whether we have lost blocks in the raid array which the user may want to clear. |
| 1.3.6.1.4.1.12740.2.1.3.1.27 | eqlMemberStatusHealth | 0 | 0 | None |
| 1.3.6.1.4.1.12740.2.1.3.1.28 | eqlMemberStatusShortId | 0 | 0 | This field specifies short member address |