Status in source: current.
Names: saPUFScanAllNow
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"saPUFScanAllNow",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Setting this object to true(1) causes the modem to immediately go offline and scan all the frequencies stored in the saPUFFrequency table. Results and timestamp of the scan are stored to non-vol. After the scan takes place the modem re-inits the CM mac and re-registers. Conditions to run the scan: - saPUFRowStatus.x must be set to active for a scan to take place for that frequency. - The scan will not take place if a provisioned line is offhook. - If this mib is added to the CM config file, a scan will not take place unless the current time from TOD server is > 360 seconds (6 minutes) from the last scan time stored in saPUFScanTimestamp.x. This mib object returns false(2)when read if no scan was initiated.\"",
"::=",
"{",
"saPUF",
"4",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Setting this object to true(1) causes the modem to immediately go offline and scan all the frequencies stored in the saPUFFrequency table. Results and timestamp of the scan are stored to non-vol. After the scan takes place the modem re-inits the CM mac and re-registers. Conditions to run the scan: - saPUFRowStatus.x must be set to active for a scan to take place for that frequency. - The scan will not take place if a provisioned line is offhook. - If this mib is added to the CM config file, a scan will not take place unless the current time from TOD server is > 360 seconds (6 minutes) from the last scan time stored in saPUFScanTimestamp.x. This mib object returns false(2)when read if no scan was initiated."
],
null,
null,
null,
null
]
}
- Cisco MIB copies (LibreNMS/Observium Community)
· Publisher's source file: SA-CM-MIB
Vendor MIB copy from the LibreNMS archive.
Cisco support.
Module: SA-CM-MIB
See published definition above
Module imports
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'DateAndTime', 'TDomain', 'TAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Counter32', 'Integer32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
Related source files and packages:
Same file in Observium Community.