OID reference
1.3.6.1.4.1.1429.77.1.10.5
By Default, reset to factory default (RFD) would clear all the PUF entries to factory values. Setting this value to false(2) would mean that the saPUF table frequencies would not be cleared upon a factory reset. This MIB should not be cleared upon factory reset and hence in permanent non-vol. The MIB would take effect…
Identification
{1 3 6 1 4 1 1429 77 1 10 5}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
saPUFEntriesClearOnRFD OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"By Default, reset to factory default (RFD) would clear all the PUF entries to factory values.
Setting this value to false(2) would mean that the saPUF table frequencies would not be cleared upon
a factory reset. This MIB should not be cleared upon factory reset and hence in permanent non-vol. The MIB
would take effect only in configuration file, but can be read via SNMPGET or SNMPWALK."
DEFVAL { true }
::= { saPUF 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
By Default, reset to factory default (RFD) would clear all the PUF entries to factory values. Setting this value to false(2) would mean that the saPUF table frequencies would not be cleared upon a factory reset. This MIB should not be cleared upon factory reset and hence in permanent non-vol. The MIB would take effect only in configuration file, but can be read via SNMPGET or SNMPWALK.
Cisco MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: saPUFEntriesClearOnRFD
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"saPUFEntriesClearOnRFD",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"By Default, reset to factory default (RFD) would clear all the PUF entries to factory values. Setting this value to false(2) would mean that the saPUF table frequencies would not be cleared upon a factory reset. This MIB should not be cleared upon factory reset and hence in permanent non-vol. The MIB would take effect only in configuration file, but can be read via SNMPGET or SNMPWALK.\"",
"DEFVAL",
"{",
"true",
"}",
"::=",
"{",
"saPUF",
"5",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"By Default, reset to factory default (RFD) would clear all the PUF entries to factory values. Setting this value to false(2) would mean that the saPUF table frequencies would not be cleared upon a factory reset. This MIB should not be cleared upon factory reset and hence in permanent non-vol. The MIB would take effect only in configuration file, but can be read via SNMPGET or SNMPWALK."
],
null,
null,
null,
[
"DEFVAL",
"true"
]
]
}Vendor MIB copy from the LibreNMS archive. Cisco support.
Module: SA-CM-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'MacAddress', 'DisplayString', 'TruthValue', 'RowStatus', 'DateAndTime', 'TDomain', 'TAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Counter32', 'Integer32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1429.77.1.10.1 | saPUFTable | 1 | 10 | |
| 1.3.6.1.4.1.1429.77.1.10.2 | saPUFTrapServer | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.10.3 | saPUFTrapControl | 0 | 0 | |
| 1.3.6.1.4.1.1429.77.1.10.4 | saPUFScanAllNow | 0 | 0 |