Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"saRgIpMgmtLanNetworksAllow",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"default",
"(",
"0",
")",
",",
"anyPrivateClass",
"(",
"1",
")",
",",
"anyClass",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Allows the user via the internal Web GUI (Lan Setup page to input an IPv4 public or private Local IP address other than a class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with the default Local Ip address = 192.168.0.1.) In all cases the mask must be 255.255.255.x since the RG is limited to supporting a maximum of 253 IP addresses. (See RFC1918 for a description of private IP addresses and specified ranges.) Available Mib settings: default(0): Only the third and fourth octets are editable in the Web GUI for the Local IP address (Ex. 192.168.x.x/24). anyPrivateClass(1): All 4 octets are editable in the Web GUI for Local IP address, but the network specified must be a Private class A, B or C network address. (Ex. A=10.x.x.x, B=172.16.x.x, C=192.168.x.x). anyClass(2): All 4 octets are editable in the Web GUI for Local IP address, and the network specified could be any public or private class A, B, or C address. If the MSO specifically sets a Local IP address in saRgIpMgmtLanNetwork to a value other than the default value (for example: 192.168.0.1) then these fields will be uneditable by the user (grayed out).\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"saRgIpMgmtLanEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"default",
0
],
[
"anyPrivateClass",
1
],
[
"anyClass",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Allows the user via the internal Web GUI (Lan Setup page to input an IPv4 public or private Local IP address other than a class C Private address (the default Network for the Primary BSS = 192.168.0.0/24, with the default Local Ip address = 192.168.0.1.) In all cases the mask must be 255.255.255.x since the RG is limited to supporting a maximum of 253 IP addresses. (See RFC1918 for a description of private IP addresses and specified ranges.) Available Mib settings: default(0): Only the third and fourth octets are editable in the Web GUI for the Local IP address (Ex. 192.168.x.x/24). anyPrivateClass(1): All 4 octets are editable in the Web GUI for Local IP address, but the network specified must be a Private class A, B or C network address. (Ex. A=10.x.x.x, B=172.16.x.x, C=192.168.x.x). anyClass(2): All 4 octets are editable in the Web GUI for Local IP address, and the network specified could be any public or private class A, B, or C address. If the MSO specifically sets a Local IP address in saRgIpMgmtLanNetwork to a value other than the default value (for example: 192.168.0.1) then these fields will be uneditable by the user (grayed out)."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}