A row in the port's modem configuration table.
Sources for this description
MIBdepot
Parsed from xylo-ports.mib.txt · avaya · XYLO-PORTS-MIB
Source file: Download xylo-ports.mib.txt
OID reference
1.3.6.1.4.1.15.2.100.2.1
A row in the port's modem configuration table.
Identification
{1 3 6 1 4 1 15 2 100 2 1}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from xylo-ports.mib.txt · avaya · XYLO-PORTS-MIB
Source file: Download xylo-ports.mib.txt
Historical records
anxpModemEntry OBJECT-TYPE
SYNTAX AnxpModemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the port's modem configuration table."
INDEX { anxpModemIndex }
::= { anxpModemTable 1 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.100.2.1.1 | anxpModemIndex | 0 | 0 | The port number for this modem configuration. |
| 1.3.6.1.4.1.15.2.100.2.1.2 | anxpModemConfig | 0 | 0 | The purpose for which this modem is configured. When set, this object will change a set of parameters to configure the modem for … |
| 1.3.6.1.4.1.15.2.100.2.1.3 | anxpModemReset | 0 | 0 | A control to force the internal modem into a clean, initial state, through a hardware reset. In response to a get-request or ge… |
| 1.3.6.1.4.1.15.2.100.2.1.4 | anxpModemStatus | 0 | 0 | This object sets the status of the modem. Explanation of the values are as follows: 1 - Make modem available if busied out. 2 -… |
| 1.3.6.1.4.1.15.2.100.2.1.5 | anxpModemBChannel | 0 | 0 | This object returns the B channel number that is using the modem. This object is valid only if the status of the modem is used.… |
| 1.3.6.1.4.1.15.2.100.2.1.6 | anxpModemWhenBusy | 0 | 0 | This object returns when the modem was busied out. This object is valid only when the modem status is busied-out(2). This MIB o… |
| 1.3.6.1.4.1.15.2.100.2.1.7 | anxpModemTotalCalls | 0 | 0 | This object maintains the count of number of times the line is seized on a modem. The line is seized when a call arrives on that … |
| 1.3.6.1.4.1.15.2.100.2.1.8 | anxpModemRingFail | 0 | 0 | This object maintains the count of number of times the modem failed to ring on a call. The counter is maintained since the last r… |
| 1.3.6.1.4.1.15.2.100.2.1.9 | anxpModemOffhookFail | 0 | 0 | This object maintains the count of number of times the modem failed to go offhook on a call. The counter is maintained since the … |
| 1.3.6.1.4.1.15.2.100.2.1.10 | anxpModemDcdFail | 0 | 0 | This object maintains the count of number of times the modem failed to assert DCD on a call. The DCD is asserted when a call is a… |
| 1.3.6.1.4.1.15.2.100.2.1.11 | anxpModemConsecFail | 0 | 0 | This object maintains the count of number of times the modem failed to accept a call consecutively. The counter gets initialized … |
| 1.3.6.1.4.1.15.2.100.2.1.12 | anxpModemFirmware | 0 | 0 | Modem firmware version string. Note: If the object returns a Nosuchname then it is possible that modem is being upgraded by AFD or… |