OID reference

anxpModemReset

1.3.6.1.4.1.15.2.100.2.1.3

Description

A control to force the internal modem into a clean, initial state, through a hardware reset. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Settingthe value to execute(2) - Busy out modem. If the modem is busy, then busy it after call is completed. For RA6300, this MIB…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.15.2.100.2.1 (anxpModemEntry)
Node code
3
Node name
anxpModemReset
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.15.2.100.2.1.3
URN notation
urn:oid:1.3.6.1.4.1.15.2.100.2.1.3
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 15 2 100 2 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) xylogics(15) annex(2) anxModem(100) anxpModemTable(2) anxpModemEntry(1) anxpModemReset(3)}
OID-IRI notation
  • /1/3/6/1/4/1/15/2/100/2/1/3
  • /ISO/Identified-Organization/6/1/4/1/15/2/100/2/1/3
  • /ISO/3/6/1/4/1/15/2/100/2/1/3
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/enterprise/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/enterprises/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/enterprises/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/vendor-objects/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/identified-organization/dod/internet/private/vendor-objects/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/enterprise/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/enterprise/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/enterprises/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/enterprises/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/ldap-enterprise/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/ldap-enterprise/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/vendor-objects/xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • /iso/org/dod/internet/private/vendor-objects/Xylogics/annex/anxModem/anxpModemTable/anxpModemEntry/anxpModemReset
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
deprecated

Enumerated values

ValueName
1ready
2execute

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In XYLO-PORTS-MIB, the row index anxpModemIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.15.2.100.2.1.3.<anxpModemIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.15.2.100.2.1.3

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

A control to force the internal modem into a clean, initial state, through a hardware reset. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Settingthe value to execute(2) - Busy out modem. If the modem is busy, then busy it after call is completed. For RA6300, this MIB object corresponds to the NA/admin port parameter 'modem -u <modem number>'. This is valid only for T1CSMIM and RA6300 boards.
Sources for this description

MIBdepot

Parsed from xylo-ports.mib.txt · avaya · XYLO-PORTS-MIB

Source file: Download xylo-ports.mib.txt

Browse all files from MIBdepot

Historical records

Additional source information

Information from OID Repository
Vendor: Avaya
Module: XYLO-PORTS-MIB (xylo-ports.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER

Automatically extracted from www.mibdepot.com
Information from MIBdepot
anxpModemReset	OBJECT-TYPE
		SYNTAX	INTEGER {
			ready(1),
			execute(2)
			}
		ACCESS	read-write
		STATUS	deprecated
		DESCRIPTION
			"A control to force the internal modem into a 
			clean, initial state, through a hardware 
			reset. In response to a get-request or 
			get-next-request, the agent always returns 
			'ready' as the value. Settingthe value to 
			execute(2) - Busy out modem. If the modem is 
				     busy, then busy it after call is
				     completed.

			For RA6300, this MIB object corresponds to the 
			NA/admin port parameter  'modem -u <modem number>'.

			This is valid only for T1CSMIM and RA6300 
			boards."
		::= { anxpModemEntry 3 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.15)

Barnes Jim

Siblings (11)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.15.2.100.2.1.1 anxpModemIndex00 The port number for this modem configuration.
1.3.6.1.4.1.15.2.100.2.1.2 anxpModemConfig00 The purpose for which this modem is configured.
When set, this object will change a set of parameters
to configure the modem for …
1.3.6.1.4.1.15.2.100.2.1.4 anxpModemStatus00 This object sets the status of the modem. Explanation of the values are as follows: 1 - Make modem available if busied out. 2 -…
1.3.6.1.4.1.15.2.100.2.1.5 anxpModemBChannel00 This object returns the B channel number that is using the modem. This object is valid only if the status of the modem is used.…
1.3.6.1.4.1.15.2.100.2.1.6 anxpModemWhenBusy00 This object returns when the modem was busied out. This object is valid only when the modem status is busied-out(2). This MIB o…
1.3.6.1.4.1.15.2.100.2.1.7 anxpModemTotalCalls00 This object maintains the count of number of times
the line is seized on a modem. The line is seized when a call
arrives on that …
1.3.6.1.4.1.15.2.100.2.1.8 anxpModemRingFail00 This object maintains the count of number of times
the modem failed to ring on a call. The counter is maintained
since the last r…
1.3.6.1.4.1.15.2.100.2.1.9 anxpModemOffhookFail00 This object maintains the count of number of times
the modem failed to go offhook on a call. The counter is
maintained since the …
1.3.6.1.4.1.15.2.100.2.1.10 anxpModemDcdFail00 This object maintains the count of number of times
the modem failed to assert DCD on a call. The DCD is asserted
when a call is a…
1.3.6.1.4.1.15.2.100.2.1.11 anxpModemConsecFail00 This object maintains the count of number of times
the modem failed to accept a call consecutively. The counter
gets initialized …
1.3.6.1.4.1.15.2.100.2.1.12 anxpModemFirmware00 Modem firmware version string.
Note: If the object returns a Nosuchname then
it is possible that modem is being upgraded by
AFD or…