OID reference
1.3.6.1.4.1.15.2.3.7.1.44
Defines the flush control character used to flush the output buffer.
Identification
{1 3 6 1 4 1 15 2 3 7 1 44}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In XYLO-PORTS-MIB, the row index anxpPortIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.15.2.3.7.1.44.<anxpPortIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.15.2.3.7.1.44
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Parsed from ANNEX-MIB.mib · ANNEX-MIB
Source file: Download ANNEX-MIB.mib
Source file: Download xylogics-annex-mib.txt
Source file: Download xylogics-annex-7_0.txt
Description 2
Historical records
anxpToggleOutput OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..2))
ACCESS read-write
STATUS deprecated
DESCRIPTION
"Defines the flush control character used to
flush the output buffer.
This value of this object can be either a single
displayable character or two characters of the
form '^x', where '^x' is translated as 'Control-x'.
This MIB object corresponds to the NA/admin
asynchronous port parameter 'toggle_output'."
::= { portEntry 44 }
anxpToggleOutput OBJECT-TYPE
SYNTAX DisplayString (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the flush control character used to
flush the output buffer."
::= { portEntry 44 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.3.7.1.1 | anxpPortIndex, portIndex | 0 | 0 | A unique number from 1 to totalPorts that identifies each serial port. |
| 1.3.6.1.4.1.15.2.3.7.1.2 | anxpMode, iSpeed | 0 | 0 | This parameter defines the mode for access to the serial line port. The default is cli |
| 1.3.6.1.4.1.15.2.3.7.1.3 | anxpCtrlLines, oSpeed | 0 | 0 | The type of hardware control used on the port: modem control (dcddtr), flow control (ctsrts), or both. |
| 1.3.6.1.4.1.15.2.3.7.1.4 | anxpBidirModem, ctrlLines | 0 | 0 | This parameter controls whether the port is configured for adaptive use with a bidirectional modem. |
| 1.3.6.1.4.1.15.2.3.7.1.5 | anxpAllowBcast, flowTypeIn | 0 | 0 | Controls whether the serial port can receive administrative broadcast messages. |
| 1.3.6.1.4.1.15.2.3.7.1.6 | anxpBcastDirection, flowTypeOut | 0 | 0 | Defines the direction that an administrative broadcast message is sent. This parameter is valid only when the port is defined as… |
| 1.3.6.1.4.1.15.2.3.7.1.7 | anxpInputStartChar, bitsPerChar | 0 | 0 | The control character sequence that restarts input if the charPortInFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.8 | anxpInputStopChar, stopBits | 0 | 0 | The control character sequence that stops input if the charPortInFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.9 | anxpOutputStartChar, parity | 0 | 0 | The control character sequence that restarts output if the charPortOutFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.10 | anxpOutputStopChar, modemDCD | 0 | 0 | The control character sequence that stops output if the charPortOutFlowType parameter (in the char MIB) is set to xonXoff. |
| 1.3.6.1.4.1.15.2.3.7.1.11 | anxpIxanyFlowCtl, modemDTR | 0 | 0 | This parameter specifies whether any input character will be treated as a start (xon) character when output has been suspended by … |
| 1.3.6.1.4.1.15.2.3.7.1.12 | anxpLongBreak, modemCTS | 0 | 0 | This parameter controls whether the Annex returns the user to the CLI prompt after receiving a break greater than two seconds. |
| 1.3.6.1.4.1.15.2.3.7.1.13 | anxpShortBreak, modemRTS | 0 | 0 | This parameter controls whether the Annex returns the user to the CLI prompt after receiving a break shorter than two seconds. |
| 1.3.6.1.4.1.15.2.3.7.1.14 | anxpForwardTimer, charsIn | 0 | 0 | This parameter defines the inter-character timer that sets the amount of time, in tens of milliseconds, that will elapse before fo… |
| 1.3.6.1.4.1.15.2.3.7.1.15 | anxpForwardCount, charsOut | 0 | 0 | Specifies the number of received characters buffered for the port by the Annex before forwarding the characters to the host or net… |
| 1.3.6.1.4.1.15.2.3.7.1.16 | anxpImask7Bits, errsParity | 0 | 0 | When enabled, instructs the Annex to ignore the eighth bit of all received characters on the port. |
| 1.3.6.1.4.1.15.2.3.7.1.17 | anxpAttnChar, errsOverrun | 0 | 0 | Defines a control character sequence as an attention character to return the user to the CLI prompt. The Annex-II only allows a s… |
| 1.3.6.1.4.1.15.2.3.7.1.18 | anxpInputBufSize, errsFraming | 0 | 0 | The number of 256-byte blocks allocated to receive input characters from this port. |
| 1.3.6.1.4.1.15.2.3.7.1.19 | anxpInputIsActivity, inCC | 0 | 0 | Controls whether received input characters are considered as activity for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.20 | anxpOutputIsActivity, outCC | 0 | 0 | Controls whether transmitted output characters are considered as activity for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.21 | anxpInactivityTimer | 0 | 0 | The amount of time, in minutes, which a port can remain inactive before the Annex terminates all sessions and resets the port. A… |
| 1.3.6.1.4.1.15.2.3.7.1.22 | anxpResetIdleTimer | 0 | 0 | Defines whether input or output resets the idle timer for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.23 | anxpCliInactivity | 0 | 0 | The amount of time, in minutes, that the Annex waits before hanging up the serial port after it becomes idle. A value of 0 turns… |
| 1.3.6.1.4.1.15.2.3.7.1.24 | anxpCliSecurity | 0 | 0 | This parameter controls whether security is enabled for the port. |
| 1.3.6.1.4.1.15.2.3.7.1.25 | anxpConnectSecurity | 0 | 0 | This parameter controls whether the host-based security policy is enabled for access from the port to the network. |
| 1.3.6.1.4.1.15.2.3.7.1.26 | anxpPortServerSecurity | 0 | 0 | This parameter controls whether the host-based security policy is enabled for access to the port from the port server. |
| 1.3.6.1.4.1.15.2.3.7.1.27 | anxpPortPassword | 0 | 0 | This parameter defines a password for the port for local password protection. |
| 1.3.6.1.4.1.15.2.3.7.1.28 | anxpUserName | 0 | 0 | A string defining the user name for the user of the serial port. |
| 1.3.6.1.4.1.15.2.3.7.1.29 | anxpDedicatedAddr | 0 | 0 | When the anxpMode parameter is set to dedicated, this parameter defines the Internet address of the host to which this port can c… |
| 1.3.6.1.4.1.15.2.3.7.1.30 | anxpDedicatedPort | 0 | 0 | The application name or TCP port number to which this port can connect when the anxpMode parameter is set to dedicated. The allo… |
| 1.3.6.1.4.1.15.2.3.7.1.31 | anxpPrompt | 0 | 0 | This parameter defines a port-specific prompt. |
| 1.3.6.1.4.1.15.2.3.7.1.32 | anxpTermVar | 0 | 0 | A string defining the type of terminal attached to the serial port. |
| 1.3.6.1.4.1.15.2.3.7.1.33 | anxpNewLineTerm | 0 | 0 | This parameter controls whether a carriage return is echoed as just a carriage return (enabled), or whether the carriage return i… |
| 1.3.6.1.4.1.15.2.3.7.1.34 | anxpEcho | 0 | 0 | This parameter controls whether the Annex echoes all characters as they are received from the port. |
| 1.3.6.1.4.1.15.2.3.7.1.35 | anxpMapToLower | 0 | 0 | When enabled, the Annex translates all upper case characters to lower case as they are received from the port. |
| 1.3.6.1.4.1.15.2.3.7.1.36 | anxpMapToUpper | 0 | 0 | When enabled, the Annex translates all lower case characters to upper case as they are transmitted to the port. |
| 1.3.6.1.4.1.15.2.3.7.1.37 | anxpHardwareTabs | 0 | 0 | When enabled, this parameter allows the Annex to expand ASCII tab characters. |
| 1.3.6.1.4.1.15.2.3.7.1.38 | anxpCharErase | 0 | 0 | This parameter controls whether the Annex echoes the character erase and word erase characters for a video terminal (enabled) or f… |
| 1.3.6.1.4.1.15.2.3.7.1.39 | anxpLineErase | 0 | 0 | This parameter controls whether the Annex echoes the line erase character for a video terminal (enabled) or for a hard-copy termi… |
| 1.3.6.1.4.1.15.2.3.7.1.40 | anxpEraseChar | 0 | 0 | Defines the character erase control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.41 | anxpEraseWord | 0 | 0 | Defines the word erase control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.42 | anxpEraseLine | 0 | 0 | Defines the line erase control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.43 | anxpRedisplayLine | 0 | 0 | Defines the reprint line control character sequence. |
| 1.3.6.1.4.1.15.2.3.7.1.45 | anxpTelnetEscape | 0 | 0 | Defines the control character that returns the user to the telnet: prompt when running the CLI telnet command. |
| 1.3.6.1.4.1.15.2.3.7.1.46 | anxpNeedDsr | 0 | 0 | Specifies whether the DSR signal needs to be asserted when connecting to a slave port. |
| 1.3.6.1.4.1.15.2.3.7.1.47 | anxpTelnetCRLF | 0 | 0 | Defines what characters are transmitted out the port to the network when the End-of-Line character is sensed. 'enabled' means tra… |
| 1.3.6.1.4.1.15.2.3.7.1.48 | anxpLatbEnable | 0 | 0 | Controls interpretation of LAT Data-B packets received from host. |
| 1.3.6.1.4.1.15.2.3.7.1.49 | anxpSlipSecure | 0 | 0 | If anxEnableSecurity is not set, this parameter selects slip session logging. If anxEnableSecurity is set, this parameter permits… |
| 1.3.6.1.4.1.15.2.3.7.1.50 | anxpNetLocalAddr | 0 | 0 | The Internet address for the Annex's side of the point-to-point (SLIP or PPP) link. |
| 1.3.6.1.4.1.15.2.3.7.1.51 | anxpNetRemoteAddr | 0 | 0 | The Internet address for the host at the remote end of the point-to-point (SLIP or PPP) link. |