The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Parsed from file SCCMIB.mib.txt
Company: None
Module: SCC-SW-MIB
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Parsed from file SCC-SW-MIB.mib
Module: SCC-SW-MIB
Vendor: Secure Computing Corporation
Module: SCC-SW-MIB
[Automatically extracted from oidview.com]
swIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { swIfEntry 8 }
swIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed." ::= { swIfEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.1 | swIfIndex | 0 | 0 | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must rema… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.2 | swIfDescr | 0 | 0 | A textual string containing information about the interface. This string should include the name of the manufacturer, the produc… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.3 | swIfType | 0 | 0 | swIftype |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.4 | swIfMtu | 0 | 0 | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used … |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.5 | swIfSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.6 | swIfPhysAddress | 0 | 0 | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which … |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.7 | swIfAdminStatus | 0 | 0 | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.9 | swIfLastChange | 0 | 0 | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior t… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.10 | swIfInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.11 | swIfInUcastPkts | 0 | 0 | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.12 | swIfInNUcastPkts | 0 | 0 | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.13 | swIfInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.14 | swIfInErrors | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.15 | swIfInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.16 | swIfOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.17 | swIfOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.18 | swIfOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast … |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.19 | swIfOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.20 | swIfOutErrors | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.21 | swIfOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.22 | swIfSpecific | 0 | 0 | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interfa… |
| 1.3.6.1.4.1.1573.3.1.7.1.2.1.23 | swIfBurbIndex | 0 | 0 | A unique value of the Sidewinder suburb index. |