swFlashDLAdmStatus OBJECT-TYPE
SYNTAX INTEGER {
sw-current (1),
sw-upgraded (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The desired state of the boot FLASH.
A management station may place the boot FLASH in a desired
state by setting this object accordingly.
The sw-upgraded(2) state indicates that the boot FLASH shall be
upgraded from the host specified in swFlashDLHost.0,
with the user name specified in swFlashDLUser.0, and
the new firmware image file specified in swFlashDLFile.0."
View at oid-info.com
The desired state of the boot FLASH.
A management station may place the boot FLASH in a desired
state by setting this object accordingly.
The sw-upgraded(2) state indicates that the boot FLASH shall be
upgraded from the host specified in swFlashDLHost.0,
with the user name specified in swFlashDLUser.0, and
the new firmware image file specified in swFlashDLFile.0.
Parsed from file v2.0.1aSW.mib.txt
Company: None
Module: SW-MIB
The desired state of the FLASH.
A management station may place the FLASH in a desired
state by setting this object accordingly:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgrade(2) means that the firmware in the FLASH is to be
upgraded from the host specified;
o swCfUpload(3) means that the switch config file is to be
uploaded to the host specified; or
o swCfDownload(4) means that the switch config file is to be
downloaded from the host specified.
o swFwCorrupted(5) state indicates that the firmware in the
FLASH is corrupted. This value is for informational purpose
only. However, set of swFlashDLAdmStatus to this value is
not allowed.
The host is specified in swFlashDLHost.0. In addition,
user name is specified in swFlashDLUser.0, and
the file name specified in swFlashDLFile.0.
Reference the user manual on the following commands,
o firmwareDownload,
o configUpload, and
o configDownload.
Parsed from file SW-MIB.mib
Module: SW-MIB
Automatically extracted from SilkWorm Switch MIBs and RSH Utilities
swFlashDLAdmStatus OBJECT-TYPE SYNTAX INTEGER { sw-current (1), sw-upgraded (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the boot FLASH. A management station may place the boot FLASH in a desired state by setting this object accordingly. The sw-upgraded(2) state indicates that the boot FLASH shall be upgraded from the host specified in swFlashDLHost.0, with the user name specified in swFlashDLUser.0, and the new firmware image file specified in swFlashDLFile.0." ::= { swSystem 12 }
swFlashDLAdmStatus OBJECT-TYPE SYNTAX INTEGER { swCurrent (1), swFwUpgrade (2), swCfUpload (3), swCfDownload (4), swFwCorrupted (5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the FLASH. A management station may place the FLASH in a desired state by setting this object accordingly: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in the FLASH is to be upgraded from the host specified; o swCfUpload(3) means that the switch config file is to be uploaded to the host specified; or o swCfDownload(4) means that the switch config file is to be downloaded from the host specified. o swFwCorrupted(5) state indicates that the firmware in the FLASH is corrupted. This value is for informational purpose only. However, set of swFlashDLAdmStatus to this value is not allowed. The host is specified in swFlashDLHost.0. In addition, user name is specified in swFlashDLUser.0, and the file name specified in swFlashDLFile.0. Reference the user manual on the following commands, o firmwareDownload, o configUpload, and o configDownload." ::= { swSystem 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.1.12.0 | swFlashDLAdmStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.1.1 | swCurrentDate, swBaseHwVer | 1 | 1 | The current date information in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.2 | swBootDate, swPktBufferSize | 1 | 1 | The date and time when the system last booted, in displaybale textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.3 | swFWLastUpdated, swLDBSize | 1 | 1 | The learning database size of this switch in the form of 'xxx KB' format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.4 | swFlashLastUpdated, swMaxVlan | 1 | 1 | The information indicates the date when the FLASH was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.5 | swBootPromLastUpdated, swNumNodeInDB | 1 | 1 | The information indicates the date when the boot PROM was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.6 | swFirmwareVersion, swMaxAllowedSecudNode | 1 | 1 | The current version of the firwmare. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.7 | swOperStatus, swNumSecudNodeInDB | 1 | 1 | The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.8 | swAdmStatus, swLongFrameStatsCounterHandling | 1 | 1 | This object selects the per port counter etherStatsPkts1024to1518Octets (RMON ether statistics) statistics counter to either reco… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.9 | swTelnetShellAdmStatus, swFrontPanelLedStatus | 1 | 1 | The desired administrative status of the Telnet shell. By setting it to terminated(1), the current Telnet shell task is deleted. … |
| 1.3.6.1.4.1.1588.2.1.1.1.1.10 | swSsn, swMiniConsoleInputControl | 1 | 1 | The soft serial number of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.11 | swFlashDLOperStatus, swMonitorPort | 1 | 1 | This object tells the switch to hook its Node Monitoring function to the port specified in here. Note: 1. The Node Monitoring fun… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.13 | swFlashDLHost, swSTPCfg | 1 | 1 | The name or IP address (in dot notation) of the host to download or upload a relevant file to the FLASH. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.14 | swFlashDLUser, swTftpDownloadPort | 1 | 1 | The user name on the host to download the firmware image to the boot FLASH. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.15 | swFlashDLFile | 1 | 1 | The file name of the firmware image. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.16 | swFlashDLPassword | 1 | 1 | The password to be used in for FTP transfer of files in the download or upload operation. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.18 | swBeaconOperStatus | 1 | 1 | The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alterna… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.19 | swBeaconAdmStatus | 1 | 1 | The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately … |
| 1.3.6.1.4.1.1588.2.1.1.1.1.20 | swDiagResult | 1 | 1 | The result of the power-on startup (POST) diagnostics. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.21 | swNumSensors | 1 | 1 | The number of sensors inside the switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22 | swSensorTable | 1 | 6 | The table of sensor entries. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.23 | swTrackChangesInfo | 1 | 1 | Track changes string. For trap only |
| 1.3.6.1.4.1.1588.2.1.1.1.1.24 | swID | 1 | 1 | The number of the logical switch (0/1) |
| 1.3.6.1.4.1.1588.2.1.1.1.1.25 | swEtherIPAddress | 1 | 1 | The IP Address of the Ethernet interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.26 | swEtherIPMask | 1 | 1 | The IP Mask of the Ethernet interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.27 | swFCIPAddress | 1 | 1 | The IP Address of the FC interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.28 | swFCIPMask | 1 | 1 | The IP Mask of the FC interface of this logical switch. |