The switch port's actual status.
This object indicates the switch port's operational
status. The notPresent(3) status indicates the
port is physically removed (note this may or may
not be possible depending on the type of port.)
The operational(1) status indicates that the port
is enabled (see swPortCfgAdminState) and working,
even though it might be auto-partitioned (see
swPortCfgAutoPartitionStatus).
If this object has the value operational(1) and
swPortCfgAdminState is set to disabled(2), it is
expected that this object's value will soon change
to notOperational(2).
Parsed from file v2.0.1aSW.mib.txt
Company: storagetek
Module: SW-MIB
swPortCfgPortStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), notOperational(2), notPresent(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The switch port's actual status. This object indicates the switch port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible depending on the type of port.) The operational(1) status indicates that the port is enabled (see swPortCfgAdminState) and working, even though it might be auto-partitioned (see swPortCfgAutoPartitionStatus). If this object has the value operational(1) and swPortCfgAdminState is set to disabled(2), it is expected that this object's value will soon change to notOperational(2)." ::= { swPortCfgTblEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.1 | swPortCfgIndex | 0 | 0 | A unique value to identify each switch port. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.2 | swPortCfgPortIfType | 0 | 0 | The object specifies the particular switch port's interface type. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.3 | swPortCfgPortName | 0 | 0 | A user definable name for this port. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.4 | swPortCfgCutThroughMode | 0 | 0 | Specify the transmit mode for this particular switch port. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.5 | swPortCfgXmitPacing | 0 | 0 | Transmit pacing enabled(2) introduces delays into the normal transmission of frames which delays attempts between stations. This … |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.6 | swPortCfgPortSpeedCapability | 0 | 0 | The speed capability that is supported by this switch port. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.7 | swPortCfgSpeedAndDuplexMode | 0 | 0 | Set the speed and duplex mode of switch port. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.8 | swPortCfgCurSpeedAndDuplex | 0 | 0 | The working speed and the duplex mode between the connected station and the switch port. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.9 | swPortCfgAdminState | 0 | 0 | Specifies whether the switch port is enabled(2) or disabled(3). If the port is in disabled(3) state, frames are not transmitted t… |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.10 | swPortCfgAutoPartitionStatus | 0 | 0 | The status indicates whether this switch port is currently partitioned by the switch's broadcast storming protection function. |
| 1.3.6.1.4.1.1588.2.1.1.1.4.1.1.12 | swPortCfgLinkStatus | 0 | 0 | The link integrity status. |