Maximum transfer speed of the adapter.
Sources for this description
MIBdepot
Parsed from MEGARAID.MIB.txt · timeplex · RAID-Adapter-MIB
OID reference
1.3.6.1.4.1.16.1.1.1.1.24
Maximum transfer speed of the adapter.
Identification
{1 3 6 1 4 1 16 1 1 1 1 24}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from MEGARAID.MIB.txt · timeplex · RAID-Adapter-MIB
Historical records
adpSpeed OBJECT-TYPE
SYNTAX INTEGER {
fiveMB(1),
tenMB(2),
twentyMB(3),
fortyMB(4),
eightyMB(5),
oneHundredSixtyMB(6),
threeHundredTwentyMB(7),
unAvailable(20)
}
ACCESS read-only
STATUS optional
DESCRIPTION
"Maximum transfer speed of the adapter."
::= { adapterEntry 24 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16.1.1.1.1.1 | adpAdapterNumber | 0 | 0 | The Adapter Number for this Instance of Adapter Object. This Entry in the Table, contains Information about the Adapter Number sp… |
| 1.3.6.1.4.1.16.1.1.1.1.2 | numLogicalDrives | 0 | 0 | Number of Logical Drives Configured on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.3 | firmwareVersion | 0 | 0 | The Firmware Version of the Firmware running on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.4 | biosVersion | 0 | 0 | The Bios Version of the BIOS Present in the Flash ROM on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.5 | dramSizeInMB | 0 | 0 | Amount of DRAM in Mega Bytes present on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.6 | chipSetType | 0 | 0 | Motherboard Chipset Type for which the Adapter ASIC is Configured. |
| 1.3.6.1.4.1.16.1.1.1.1.7 | rebuildRateInPercent | 0 | 0 | Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-W… |
| 1.3.6.1.4.1.16.1.1.1.1.8 | flushInterval | 0 | 0 | Internal Cache Flush Interval for Logical Drives in WriteBack Mode. |
| 1.3.6.1.4.1.16.1.1.1.1.9 | maxConcurrentCmds | 0 | 0 | Maximum Concurrent Commands Supported by the Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.10 | spinupDelay | 0 | 0 | This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Gr… |
| 1.3.6.1.4.1.16.1.1.1.1.11 | spinupCount | 0 | 0 | This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Gr… |
| 1.3.6.1.4.1.16.1.1.1.1.12 | adpIOReadsPerSec | 0 | 0 | Number of IO Reads/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.13 | adpIOWritesPerSec | 0 | 0 | Number of IO Writes/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.14 | adpReadKBsPerSec | 0 | 0 | Amount of Data Transferred in KBs/sec due to READ Transfers. |
| 1.3.6.1.4.1.16.1.1.1.1.15 | adpWriteKBsPerSec | 0 | 0 | Amount of Data Transferred in KBs/sec due to WRITE Transfers. |
| 1.3.6.1.4.1.16.1.1.1.1.16 | adpReadFailuresPerSec | 0 | 0 | Number of Read-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.17 | adpWriteFailuresPerSec | 0 | 0 | Number of Write-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.18 | scanChannels, adpBasePort | 0 | 0 | Maximum Concurrent Commands Supported by the Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.19 | subSystemVendorId | 0 | 0 | The Vendor ID for this Instance of Adapter Object. This Entry in the Table, contains Information about the SubSystem Vendor ID of… |
| 1.3.6.1.4.1.16.1.1.1.1.20 | subSystemID | 0 | 0 | The Device ID for this Instance of Adapter Object. This Entry in the Table, contains Information about the SubSystem Id of this a… |
| 1.3.6.1.4.1.16.1.1.1.1.21 | numSCSIChannels | 0 | 0 | Maximum number of SCSI Channels Supported by the Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.22 | numFCLoops, subSystemVendorID | 0 | 0 | The PCI sub system vendor ID of this controller |
| 1.3.6.1.4.1.16.1.1.1.1.23 | productName | 0 | 0 | The enriched formation of the controller retrieved from the firmware |