| 1.3.6.1.4.1.16.1.1.1.1.1 |
adpAdapterNumber | 0 | 0 |
The Adapter Number for this Instance of Adapter Object. This Entry in the Table, contains Information about the Adapter Number sp… |
| 1.3.6.1.4.1.16.1.1.1.1.2 |
numLogicalDrives | 0 | 0 |
Number of Logical Drives Configured on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.3 |
firmwareVersion | 0 | 0 |
The Firmware Version of the Firmware running on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.4 |
biosVersion | 0 | 0 |
The Bios Version of the BIOS Present in the Flash ROM on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.5 |
dramSizeInMB | 0 | 0 |
Amount of DRAM in Mega Bytes present on this Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.6 |
chipSetType | 0 | 0 |
Motherboard Chipset Type for which the Adapter ASIC is Configured. |
| 1.3.6.1.4.1.16.1.1.1.1.7 |
rebuildRateInPercent | 0 | 0 |
Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-W… |
| 1.3.6.1.4.1.16.1.1.1.1.8 |
flushInterval | 0 | 0 |
Internal Cache Flush Interval for Logical Drives in WriteBack Mode. |
| 1.3.6.1.4.1.16.1.1.1.1.10 |
spinupDelay | 0 | 0 |
This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Gr… |
| 1.3.6.1.4.1.16.1.1.1.1.11 |
spinupCount | 0 | 0 |
This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Gr… |
| 1.3.6.1.4.1.16.1.1.1.1.12 |
adpIOReadsPerSec | 0 | 0 |
Number of IO Reads/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.13 |
adpIOWritesPerSec | 0 | 0 |
Number of IO Writes/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.14 |
adpReadKBsPerSec | 0 | 0 |
Amount of Data Transferred in KBs/sec due to READ Transfers. |
| 1.3.6.1.4.1.16.1.1.1.1.15 |
adpWriteKBsPerSec | 0 | 0 |
Amount of Data Transferred in KBs/sec due to WRITE Transfers. |
| 1.3.6.1.4.1.16.1.1.1.1.16 |
adpReadFailuresPerSec | 0 | 0 |
Number of Read-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.17 |
adpWriteFailuresPerSec | 0 | 0 |
Number of Write-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.18 |
scanChannels, adpBasePort | 0 | 0 |
Maximum Concurrent Commands Supported by the Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.19 |
subSystemVendorId | 0 | 0 |
The Vendor ID for this Instance of Adapter Object. This Entry in the Table, contains Information about the SubSystem Vendor ID of… |
| 1.3.6.1.4.1.16.1.1.1.1.20 |
subSystemID | 0 | 0 |
The Device ID for this Instance of Adapter Object. This Entry in the Table, contains Information about the SubSystem Id of this a… |
| 1.3.6.1.4.1.16.1.1.1.1.21 |
numSCSIChannels | 0 | 0 |
Maximum number of SCSI Channels Supported by the Adapter. |
| 1.3.6.1.4.1.16.1.1.1.1.22 |
numFCLoops, subSystemVendorID | 0 | 0 |
The PCI sub system vendor ID of this controller |
| 1.3.6.1.4.1.16.1.1.1.1.23 |
productName | 0 | 0 |
The enriched formation of the controller retrieved from the firmware |
| 1.3.6.1.4.1.16.1.1.1.1.24 |
adpSpeed | 0 | 0 |
Maximum transfer speed of the adapter. |