Add 802.1p re-mark entry.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.161.19.3.3.2.246
Add 802.1p re-mark entry.
Identification
{1 3 6 1 4 1 161 19 3 3 2 246}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.161.19.3.3.2.246.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
addRemarkPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Add 802.1p re-mark entry."
::={whispBoxConfig 246}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Add 802.1p re-mark entry.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: addRemarkPriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"addRemarkPriority",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"7",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Add 802.1p re-mark entry.\"",
"::=",
"{",
"whispBoxConfig",
"246",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Add 802.1p re-mark entry."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: WHISP-BOX-MIBV2-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: WHISP-BOX-MIBV2-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Gauge32', 'IpAddress', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP'], 'WHISP-TCV2-MIB': ['WhispLUID', 'WhispMACAddress', 'EventString'], 'WHISP-GLOBAL-REG-MIB': ['whispModules', 'whispBox']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.161.19.3.3.2.1 | linkNegoSpeed | 0 | 0 | Link negotiation speeds. H10BT F10BT H100BT F100BT Separate the values with comma when doing a set. e.g. H10BT,F10BT,H100BT,F100BT |
| 1.3.6.1.4.1.161.19.3.3.2.2 | colorCode | 0 | 0 | Color code. |
| 1.3.6.1.4.1.161.19.3.3.2.3 | displayOnlyAccess | 0 | 0 | Display only password. |
| 1.3.6.1.4.1.161.19.3.3.2.4 | fullAccess | 0 | 0 | Full access password. |
| 1.3.6.1.4.1.161.19.3.3.2.5 | webAutoUpdate | 0 | 0 | Web page auto update in seconds. 0 means disabled. |
| 1.3.6.1.4.1.161.19.3.3.2.6 | pass1Status | 0 | 0 | Password 1(display only) status. |
| 1.3.6.1.4.1.161.19.3.3.2.7 | pass2Status | 0 | 0 | Password 2(full access) status. |
| 1.3.6.1.4.1.161.19.3.3.2.8 | bridgeEntryTimeout | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.9 | snmpMibPerm | 0 | 0 | Read/Write permission for MIB groups. |
| 1.3.6.1.4.1.161.19.3.3.2.10 | bhTimingMode | 0 | 0 | bhtimingMode |
| 1.3.6.1.4.1.161.19.3.3.2.11 | bhModulation | 0 | 0 | Modulation scheme. For Backhaul units only. Only level 4 backhaul can be changed to 20Mbits/Second. |
| 1.3.6.1.4.1.161.19.3.3.2.12 | powerControl | 0 | 0 | Power control. |
| 1.3.6.1.4.1.161.19.3.3.2.13 | extFilterDelay | 0 | 0 | External Filters Delay. For 900MHz radios only. |
| 1.3.6.1.4.1.161.19.3.3.2.14 | antennaGain | 0 | 0 | Antenna gain. For 5.7AGHz radios only. |
| 1.3.6.1.4.1.161.19.3.3.2.15 | eirp | 0 | 0 | This variable is deprecated. |
| 1.3.6.1.4.1.161.19.3.3.2.16 | dynamicLearning | 0 | 0 | To enable VLAN dynamic learning. |
| 1.3.6.1.4.1.161.19.3.3.2.17 | managementVID | 0 | 0 | Management VLAN VID. |
| 1.3.6.1.4.1.161.19.3.3.2.18 | agingTimeout | 0 | 0 | Aging timeout. |
| 1.3.6.1.4.1.161.19.3.3.2.19 | frameType | 0 | 0 | Allow only tagged frame. |
| 1.3.6.1.4.1.161.19.3.3.2.20 | addVlanMember | 0 | 0 | Add VLAN memeber. |
| 1.3.6.1.4.1.161.19.3.3.2.21 | removeVlanMember | 0 | 0 | Remove VLAN memeber. |
| 1.3.6.1.4.1.161.19.3.3.2.22 | scheduling | 0 | 0 | To use hardware or software scheduling |
| 1.3.6.1.4.1.161.19.3.3.2.23 | transmitterOP | 0 | 0 | Transmitter output power. |
| 1.3.6.1.4.1.161.19.3.3.2.24 | bridgeEnable | 0 | 0 | Disable or enable bridging functionality for a BH unit. |
| 1.3.6.1.4.1.161.19.3.3.2.25 | fecEnable | 0 | 0 | Disable or enable FEC error correction functionality for multipoint units. |
| 1.3.6.1.4.1.161.19.3.3.2.26 | trapIP1 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.27 | trapIP2 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.28 | trapIP3 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.29 | trapIP4 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.30 | trapIP5 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.31 | trapIP6 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.32 | trapIP7 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.33 | trapIP8 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.34 | trapIP9 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.35 | trapIP10 | 0 | 0 | Trap IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.36 | commString, commStringRWrite | 0 | 0 | Community string. |
| 1.3.6.1.4.1.161.19.3.3.2.37 | subnetMask | 0 | 0 | Subnet mask for the management IP. |
| 1.3.6.1.4.1.161.19.3.3.2.38 | mngtIP | 0 | 0 | Management IP address. |
| 1.3.6.1.4.1.161.19.3.3.2.39 | allowVIDAccess | 0 | 0 | Allow or disallow local SM management VID access. |
| 1.3.6.1.4.1.161.19.3.3.2.40 | setDefaultPlug | 0 | 0 | If enable parameters are set to Factory Defaults upon default plug detection. |
| 1.3.6.1.4.1.161.19.3.3.2.41 | hwsCompatibility | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.42 | gpsInput | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.43 | ism | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.44 | hiPriority | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.45 | userName | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.46 | userPassword | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.47 | userAccessLevel | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.48 | deleteUser | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.49 | twoXRate | 0 | 0 | |
| 1.3.6.1.4.1.161.19.3.3.2.50 | lanDhcpState | 0 | 0 |