OID reference
1.3.6.1.4.1.16177.1.400.1.3.3.2
Perform a factory reset (i.e. reset device configuration, including administrator password and HTTPS/802.1x certificates, to its default state). **Note:** You will not be able to communicate with the device until the factory reset has finished and the device has booted again. Applies to AP and STA.
Identification
{1 3 6 1 4 1 16177 1 400 1 3 3 2}
| Value | Name |
|---|---|
| 0 | nop |
| 1 | reset |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.16177.1.400.1.3.3.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rpcSysFactoryReset OBJECT-TYPE
SYNTAX INTEGER { nop(0), reset(1) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Perform a factory reset (i.e. reset device configuration,
including administrator password and HTTPS/802.1x certificates,
to its default state).
**Note:** You will not be able to communicate with the device
until the factory reset has finished and the device has booted
again.
Applies to AP and STA."
::= { rpcSystem 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Perform a factory reset (i.e. reset device configuration, including administrator password and HTTPS/802.1x certificates, to its default state). **Note:** You will not be able to communicate with the device until the factory reset has finished and the device has booted again. Applies to AP and STA.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rpcSysFactoryReset
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rpcSysFactoryReset",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"nop",
"(",
"0",
")",
",",
"reset",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Perform a factory reset (i.e. reset device configuration, including administrator password and HTTPS/802.1x certificates, to its default state). **Note:** You will not be able to communicate with the device until the factory reset has finished and the device has booted again. Applies to AP and STA.\"",
"::=",
"{",
"rpcSystem",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"nop",
0
],
[
"reset",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Perform a factory reset (i.e. reset device configuration, including administrator password and HTTPS/802.1x certificates, to its default state). **Note:** You will not be able to communicate with the device until the factory reset has finished and the device has booted again. Applies to AP and STA."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: WESTERMO-SW6-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'IpAddress', 'Integer32', 'TimeTicks'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16177.1.400.1.3.3.1 | rpcSysReboot | 0 | 0 | |
| 1.3.6.1.4.1.16177.1.400.1.3.3.3 | rpcSysErrorReset | 0 | 0 | |
| 1.3.6.1.4.1.16177.1.400.1.3.3.4 | rpcSysKernelLogReset | 0 | 0 |